Wraps by car

Mitsubishi i wrap

The Mitsubishi i wrap page covers the first generation built from 2006 to 2013. One generation is in the catalog. A full wrap of the hatchback body takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast vinyl wrap.

1generations13.5 mof film for a full wrap

Mitsubishi i, first generation, factory photo
Mitsubishi i, first generation. Factory color shown.

Mitsubishi i wrap colors and ideas

  • i black wrap
  • i white wrap
  • i gray wrap
  • i silver wrap
  • i red wrap
  • i blue wrap
  • i green wrap
  • i yellow wrap
  • i orange wrap
  • i purple wrap
  • i pink wrap
  • i teal wrap
  • i brown wrap
  • i gold wrap
  • i chrome wrap
  • i color shift wrap
  • i carbon fiber wrap
  • i camo and patterned wrap

How much vinyl to wrap a Mitsubishi i

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2013hatchback (5 doors)133.7 in (3,395 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

i wrap cost factors

The i wrap cost depends mainly on the film area of this mini hatchback. A full wrap is about 44 ft (13.5 m) of 60-inch (1.52 m) cast film, while chrome or patterned film is about 52 ft (16 m). The cost also depends on paint condition, especially on a car built from 2006 to 2013. Partial jobs like a roof wrap use less film and different labor.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

i wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi i, first generation, factory photo
Factory color shown

2006–2013 i hatchback (first generation)

2006–2013hatchback (5 doors)133.7 in (3,395 mm)

The first generation Mitsubishi i was produced from 2006 to 2013 as a five-door hatchback. Paint age matters on a car of these years because panels may be original or repainted. A test spot comes before a full wrap to check how the film sticks. The small body still needs about 44 ft (13.5 m) of film if it is wrapped completely.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on an i

A partial wrap on the Mitsubishi i can cover the roof, hood, or mirror caps. An i chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film on the front end. These jobs use less film than the full 44 ft (13.5 m) estimate.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mitsubishi i: body, cut-outs and film

The Mitsubishi i vinyl wrap covers a five-door hatchback with a length of 133.7 in (3,395 mm). Its tall mini-car body means a full wrap uses about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film brings the estimate to about 52 ft (16 m). Installing film on the small panels goes quickly but the vertical sides still need care.

The main i wrap idea begins with the tailgate that holds the rear glass. The film ends at the edge of the glass so the wiper and handle stay usable. Window trim and badges can be covered for a chrome delete. The small body also suits a roof or hood partial wrap.

For anyone counting how much vinyl to wrap an i, the catalog has only the first generation from 2006 to 2013. The body code HA1W stayed with one five-door hatchback shape. Film use in those years is based on the same 133.7 in (3,395 mm) length. Paint condition from those years may add prep time but not panel area.

Questions about wrapping a Mitsubishi i

How much vinyl does it take to wrap a Mitsubishi i?

A Mitsubishi i takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film for a full wrap. This figure covers the first generation hatchback. Chrome or patterned film lifts the estimate to about 52 ft (16 m).

Can I wrap only the hood or the roof of an i?

Yes, only the hood or the roof of an i can be wrapped. A partial wrap on that car also covers mirror caps. The roof and hood are flat small panels that use much less film than a full wrap.

Is an i hard to wrap?

An i is not especially hard to wrap, but the tailgate adds work because the rear glass is part of it. The film has to end at the edge of the glass. The small body is 133.7 in (3,395 mm) long, so panel access is easy. Paint age from 2006 to 2013 can add prep time.

How many generations of the i does this page cover?

This page covers one generation of the i, built from 2006 to 2013. The body code is HA1W and the style is a five-door hatchback.