Wraps by car

Mitsubishi Jeep J wrap

The Mitsubishi Jeep J wrap page covers the one-generation SUV built from 1952 to 1998. A full vinyl wrap of the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the estimate to about 59 ft (18 m). The car is a Mitsubishi Jeep J, a five-door SUV with a boxy shape.

1generations15 mof film for a full wrap

Mitsubishi Jeep J, first generation, factory photo
Mitsubishi Jeep J, first generation. Factory color shown.

Mitsubishi Jeep J wrap colors and ideas

  • Jeep J black wrap
  • Jeep J white wrap
  • Jeep J gray wrap
  • Jeep J silver wrap
  • Jeep J red wrap
  • Jeep J blue wrap
  • Jeep J green wrap
  • Jeep J yellow wrap
  • Jeep J orange wrap
  • Jeep J purple wrap
  • Jeep J pink wrap
  • Jeep J teal wrap
  • Jeep J brown wrap
  • Jeep J gold wrap
  • Jeep J chrome wrap
  • Jeep J color shift wrap
  • Jeep J carbon fiber wrap
  • Jeep J camo and patterned wrap

How much vinyl to wrap a Mitsubishi Jeep J

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1952–1998SUV (5 doors)136.0 in (3,455 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Jeep J wrap cost factors

The Jeep J wrap cost depends on the amount of film and the labor of the tall body. The estimate of about 49 ft (15 m) of 60-inch (1.52 m) cast film sets the material need for a full wrap. Labor increases because the roof is wrapped from a platform. The condition of the paint and any rust repair also affect the final cost.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (74.9 in (1,902 mm)): the roof is wrapped from a platform.

Jeep J wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Jeep J, first generation, factory photo
Factory color shown

1952–1998 Jeep J SUV (first generation)

1952–1998SUV (5 doors)136.0 in (3,455 mm)

The first generation of the Mitsubishi Jeep J runs from 1952 to 1998 and is the only body in this catalog. Its height of 74.9 in (1,902 mm) means the roof is wrapped from a platform and takes more time. The SUV has five doors and a length of 136.0 in (3,455 mm). The tall body adds labor to every wrap job.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (74.9 in (1,902 mm)): the roof is wrapped from a platform.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Jeep J

The Jeep J chrome delete covers the window trim and badges with black film. A partial wrap on this SUV can include the roof, hood, and mirror caps. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These smaller jobs use less of the 60-inch (1.52 m) film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mitsubishi Jeep J: body, cut-outs and film

The Mitsubishi Jeep J vinyl wrap is shaped by the body's single five-door SUV style. The length of 136.0 in (3,455 mm) keeps film use moderate for a vehicle of this height. The tall body means installers plan for roof work from a platform. All panels are relatively flat, which helps the film lay down cleanly.

Jeep J wrap ideas start with the tailgate: the rear glass is set into it, so the film must end at the edge of the glass. The body stands 74.9 in (1,902 mm) tall, making the roof a two-person job from a platform. Other parts that need cut-outs or removal include door handles, mirrors, and badges. Careful trimming around the glass and hinges keeps the wrap looking tidy.

How much vinyl to wrap a Jeep J depends on the generation, but this page covers one generation, so the estimate stays the same. The 1952–1998 production run saw no major body changes that alter the film count. The figure of about 49 ft (15 m) of 60-inch (1.52 m) cast film applies to the full body. Installers add extra for mistakes or complex areas.

Questions about wrapping a Mitsubishi Jeep J

How much vinyl does it take to wrap a Mitsubishi Jeep J?

A full wrap of a Mitsubishi Jeep J takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the estimate rises to about 59 ft (18 m). These figures cover the newest body of the single generation.

Can I wrap only the hood or the roof of a Jeep J?

Yes, you can wrap only the hood or the roof of a Jeep J. A partial wrap can include the roof, hood, and mirror caps. The roof on this tall SUV is wrapped from a platform.

Is a Jeep J hard to wrap?

A Jeep J is harder to wrap than a lower SUV because of its height. The body stands 74.9 in (1,902 mm) tall, so the roof is wrapped from a platform. The tailgate has the rear glass in it, so the film must end at the edge of the glass.

How many generations of the Jeep J does this page cover?

This page covers one generation of the Mitsubishi Jeep J. The single generation runs from 1952 to 1998. The body style is a five-door SUV.