Wraps by car

Mitsubishi L300 wrap

The Mitsubishi L300 wrap guide covers two generations of this minivan, produced from 1979 through 1998. A full vinyl wrap of the newest body takes about 66 ft (20 m) of 60-inch (1.52 m) cast film. The page explains what a wrap involves on this boxy van.

2generations20 mof film for a full wrap

Mitsubishi L300, second generation, factory photo
Mitsubishi L300, second generation. Factory color shown.

Mitsubishi L300 wrap colors and ideas

  • Mitsubishi L300 black wrap
  • Mitsubishi L300 white wrap
  • Mitsubishi L300 gray wrap
  • Mitsubishi L300 silver wrap
  • Mitsubishi L300 red wrap
  • Mitsubishi L300 blue wrap
  • Mitsubishi L300 green wrap
  • Mitsubishi L300 yellow wrap
  • Mitsubishi L300 orange wrap
  • Mitsubishi L300 purple wrap
  • Mitsubishi L300 pink wrap
  • Mitsubishi L300 teal wrap
  • Mitsubishi L300 brown wrap
  • Mitsubishi L300 gold wrap
  • Mitsubishi L300 chrome wrap
  • Mitsubishi L300 color shift wrap
  • Mitsubishi L300 carbon fiber wrap
  • Mitsubishi L300 camo and patterned wrap

How much vinyl to wrap a Mitsubishi L300

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1987–1998van (4 doors)168.3 in (4,275 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)
1979–1986van (4 doors)161.4 in (4,100 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Mitsubishi L300 wrap cost factors

Mitsubishi L300 wrap cost depends on the size of the body, the film family and how many panels are removed for a clean finish. The newer body needs about 66 ft (20 m) of 60-inch (1.52 m) cast film, the older one about 62 ft (19 m), and a chrome or patterned film adds about 8 ft (2.5 m). The sliding door tracks and the tall roof add time, and on a van from 1979 to 1998 the paint may be original or resprayed, which changes how the surface is prepared.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: van (4 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (72.2 in (1,834 mm)): the roof is wrapped from a platform.

Mitsubishi L300 wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi L300, second generation, factory photo
Factory color shown

1987–1998 Mitsubishi L300 van (second generation)

1987–1998van (4 doors)168.3 in (4,275 mm)

The second-generation Mitsubishi L300 wrap centers on the sliding side doors, whose tracks stay bare and decide where the film is cut. This body is 168.3 in (4,275 mm) long and 72.2 in (1,834 mm) tall, so the roof is wrapped from a platform. A full wrap of this generation takes about 66 ft (20 m) of 60-inch (1.52 m) cast film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (72.2 in (1,834 mm)): the roof is wrapped from a platform.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Mitsubishi L300, first generation, factory photo
Factory color shown

1979–1986 Mitsubishi L300 van (first generation)

1979–1986van (4 doors)161.4 in (4,100 mm)

The first-generation Mitsubishi L300 wrap starts with paint age, because on a car of these years panels may be original or repainted, and a test spot comes before a full wrap. This body is 161.4 in (4,100 mm) long and 70.9 in (1,800 mm) tall, with the same sliding door tracks left bare. A full wrap of this generation takes about 62 ft (19 m) of 60-inch (1.52 m) cast film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (70.9 in (1,800 mm)): the roof is wrapped from a platform.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Mitsubishi L300

A partial Mitsubishi L300 wrap covers the roof, the hood or the mirror caps, with each panel priced by its size. A Mitsubishi L300 chrome delete turns the bright window trim and badges black with film, which is a small job in square feet but long in detail time. Paint protection film (PPF) can also be applied to the front end of the van as a clear film.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mitsubishi L300: body, cut-outs and film

The Mitsubishi L300 vinyl wrap is shaped by the van body and its two size classes. The first generation runs 161.4 in (4,100 mm) long, the second 168.3 in (4,275 mm), and both are tall bodies that need a platform for the roof. Every body style is a four-door van, so the wrap includes all door faces and the large side panels.

Mitsubishi L300 wrap ideas must include the sliding side door tracks, which stay bare and decide where the film is cut. The tall body of either generation means the roof is wrapped from a platform, and the panel gaps above the doors are deep enough to need a second set of hands. On a van of this age the window rubbers and badges are often removed before film goes on.

How much vinyl to wrap a Mitsubishi L300 changes between the two generations by about 4 ft (1.2 m) of 60-inch (1.52 m) film. The second generation is 6.9 in (175 mm) longer than the first, and the extra length sits mostly in the rear quarter panels. Chrome or patterned film adds roughly 8 ft (2.5 m) to the estimate on either body.

Questions about wrapping a Mitsubishi L300

How much vinyl does it take to wrap a Mitsubishi L300?

About 66 ft (20 m) of 60-inch (1.52 m) cast film wraps the newest Mitsubishi L300 generation. That figure covers the second-generation body, which is 168.3 in (4,275 mm) long, and a chrome or patterned film would need about 74 ft (22.5 m).

Are the sliding doors of a Mitsubishi L300 wrapped?

No, the sliding doors of a Mitsubishi L300 are wrapped on the faces but the tracks stay bare. The film is cut along the tracks so the door can still slide, and the cut line follows the edge of the channel.

Can I wrap only the hood or the roof of a Mitsubishi L300?

Yes, a hood-only or roof-only wrap on a Mitsubishi L300 is a standard partial job, along with mirror caps. The roof of this tall van is wrapped from a platform and the hood is removed from its hinges for a clean edge.

Is a Mitsubishi L300 hard to wrap?

A Mitsubishi L300 is hard to wrap because of its tall flat sides, deep door tracks and roof height. The sliding door tracks stay bare and force careful cutting, and the roof needs a platform at 72.2 in (1,834 mm) or 70.9 in (1,800 mm) depending on generation.