Wraps by car

Mitsubishi L400 wrap

The Mitsubishi L400 wrap uses a vinyl wrap to change the look of this minivan. This page covers the first generation, which ran from 1994 to 2006. A full wrap of the newest body takes about 74 ft (22.5 m) of 60-inch (1.52 m) cast film.

1generations22.5 mof film for a full wrap

Mitsubishi L400, first generation, factory photo
Mitsubishi L400, first generation. Factory color shown.

Mitsubishi L400 wrap colors and ideas

  • Mitsubishi L400 black wrap
  • Mitsubishi L400 white wrap
  • Mitsubishi L400 gray wrap
  • Mitsubishi L400 silver wrap
  • Mitsubishi L400 red wrap
  • Mitsubishi L400 blue wrap
  • Mitsubishi L400 green wrap
  • Mitsubishi L400 yellow wrap
  • Mitsubishi L400 orange wrap
  • Mitsubishi L400 purple wrap
  • Mitsubishi L400 pink wrap
  • Mitsubishi L400 teal wrap
  • Mitsubishi L400 brown wrap
  • Mitsubishi L400 gold wrap
  • Mitsubishi L400 chrome wrap
  • Mitsubishi L400 color shift wrap
  • Mitsubishi L400 carbon fiber wrap
  • Mitsubishi L400 camo and patterned wrap

How much vinyl to wrap a Mitsubishi L400

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1994–2006van (5 doors)199.0 in (5,055 mm)about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m)

Mitsubishi L400 wrap cost factors

The Mitsubishi L400 wrap cost depends on the amount of film and the labor for this tall five-door van. A full wrap takes about 74 ft (22.5 m) of 60-inch (1.52 m) cast film, or about 85 ft (26 m) for chrome or patterned film. The length of 199.0 in (5,055 mm) and height of 77.2 in (1,960 mm) make the job larger than a car wrap. More complex designs or extra disassembly will also add to the total.

  • Film for a full wrap: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (77.2 in (1,960 mm)): the roof is wrapped from a platform.

Mitsubishi L400 wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi L400, first generation, factory photo
Factory color shown

1994–2006 Mitsubishi L400 van (first generation)

1994–2006van (5 doors)199.0 in (5,055 mm)

The first generation Mitsubishi L400 has sliding side doors where the tracks stay bare and decide where the film is cut. This van body is 199.0 in (5,055 mm) long and 77.2 in (1,960 mm) tall. A full wrap needs about 74 ft (22.5 m) of 60-inch (1.52 m) cast film, or about 85 ft (26 m) for chrome or patterned film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (77.2 in (1,960 mm)): the roof is wrapped from a platform.

Film: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).

Roof, hood, chrome delete and PPF on a Mitsubishi L400

Partial wrap options for the Mitsubishi L400 include the roof, hood, and mirror caps. Chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. These jobs use less material than a full wrap and can be done in stages.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mitsubishi L400: body, cut-outs and film

A Mitsubishi L400 vinyl wrap is sized for a large van body. The first generation is a five-door van with an overall length of 199.0 in (5,055 mm). A tall body of 77.2 in (1,960 mm) means the roof is wrapped from a platform. The sliding side doors leave their tracks bare, and the film is cut along them.

Mitsubishi L400 wrap ideas include covering the tall panels and working around the sliding doors. The door tracks stay bare, so the film edges must be trimmed neatly along those channels. Because the body is tall, the roof is best wrapped from a safe platform. The side door areas need precise cuts so the doors still open without catching the film.

To know how much vinyl to wrap a Mitsubishi L400, measure the full exterior of this minivan. The first generation is a five-door van that is 199.0 in (5,055 mm) long and 77.2 in (1,960 mm) tall. A standard color change wrap needs about 74 ft (22.5 m) of 60-inch (1.52 m) cast film. If you choose a chrome or patterned film, allow for about 85 ft (26 m) to match the pattern across the large panels.

Questions about wrapping a Mitsubishi L400

How much vinyl does it take to wrap a Mitsubishi L400?

It takes about 74 ft (22.5 m) of 60-inch (1.52 m) cast film to wrap a Mitsubishi L400. For chrome or patterned film, the estimate is about 85 ft (26 m) due to pattern alignment on the large van panels. These figures cover a full wrap of the first generation body.

Are the sliding doors of a Mitsubishi L400 wrapped?

The sliding doors of a Mitsubishi L400 are wrapped, but the door tracks stay bare. The film is cut along the tracks so the doors can open and close without interference. This leaves a clean edge that follows the original lines of the van.

Can I wrap only the hood or the roof of a Mitsubishi L400?

Yes, you can wrap only the hood or the roof of a Mitsubishi L400. Partial wrap jobs often include the roof, hood, and mirror caps. These smaller areas need less film and can be chosen to suit your budget.

Is a Mitsubishi L400 hard to wrap?

A Mitsubishi L400 is more work to wrap than a car because of its tall, long body. The van is 199.0 in (5,055 mm) long and 77.2 in (1,960 mm) tall, so the roof must be wrapped from a platform. The sliding side doors add extra work because the tracks stay bare and the film must be cut carefully along them.