Wraps by car

Mitsubishi Lancer Ralliart wrap

The Mitsubishi Lancer Ralliart wrap covers the tenth-generation (2008–2011) and ninth-generation (2003–2007) models. The catalog lists two generations, and the newest sedan body takes about 56 ft (17 m) of 60-inch (1.52 m) cast vinyl wrap. The hatchback body takes about 57 ft (17.5 m) of the same film.

2generations17 mof film for a full wrap

Mitsubishi Lancer Ralliart, tenth generation, factory photo
Mitsubishi Lancer Ralliart, tenth generation. Factory color shown.

Mitsubishi Lancer Ralliart wrap colors and ideas

  • Lancer Ralliart black wrap
  • Lancer Ralliart white wrap
  • Lancer Ralliart gray wrap
  • Lancer Ralliart silver wrap
  • Lancer Ralliart red wrap
  • Lancer Ralliart blue wrap
  • Lancer Ralliart green wrap
  • Lancer Ralliart yellow wrap
  • Lancer Ralliart orange wrap
  • Lancer Ralliart purple wrap
  • Lancer Ralliart pink wrap
  • Lancer Ralliart teal wrap
  • Lancer Ralliart brown wrap
  • Lancer Ralliart gold wrap
  • Lancer Ralliart chrome wrap
  • Lancer Ralliart color shift wrap
  • Lancer Ralliart carbon fiber wrap
  • Lancer Ralliart camo and patterned wrap

How much vinyl to wrap a Mitsubishi Lancer Ralliart

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2008–2011hatchback, sedan (4 or 5 doors)179.9 in (4,570 mm) to 180.5 in (4,585 mm)about 56 ft (17 m) for the sedan to 57 ft (17.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m)
2003–2007sedan, wagon (4 or 5 doors)180.5 in (4,585 mm) to 181.3 in (4,605 mm)about 51 ft (15.5 m) for the sedan to 54 ft (16.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m)

Lancer Ralliart wrap cost factors

The Lancer Ralliart wrap cost depends on the film amount, the body style, and the condition of the paint. A tenth-generation hatchback takes about 57 ft (17.5 m) of cast film and a ninth-generation wagon takes about 54 ft (16.5 m). Removing trim and correcting paint defects adds labor. A full color change wrap on a compact car like the Lancer Ralliart needs more material than a partial wrap.

  • Film for a full wrap: about 56 ft (17 m) for the sedan to 57 ft (17.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).
  • Body: hatchback, sedan (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Lancer Ralliart wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Lancer Ralliart, tenth generation, factory photo
Factory color shown

2008–2011 Lancer Ralliart hatchback, sedan (tenth generation)

2008–2011hatchback, sedan (4 or 5 doors)179.9 in (4,570 mm) to 180.5 in (4,585 mm)

The tenth-generation Lancer Ralliart came as a hatchback and sedan from 2008 to 2011. The style decides the panel plan and the film amount. The sedan body is 180.5 in (4,585 mm) long and the hatchback is 179.9 in (4,570 mm) long. The hatchback needs about 57 ft (17.5 m) of film and the sedan needs about 56 ft (17 m).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 56 ft (17 m) for the sedan to 57 ft (17.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).

Mitsubishi Lancer Ralliart, ninth generation, factory photo
Factory color shown

2003–2007 Lancer Ralliart sedan, wagon (ninth generation)

2003–2007sedan, wagon (4 or 5 doors)180.5 in (4,585 mm) to 181.3 in (4,605 mm)

The ninth-generation Lancer Ralliart was sold from 2003 to 2007 as a sedan and wagon, with a restyle in 2005. Paint age matters because panels may be original or repainted, so a test spot comes before a full wrap. The sedan is 180.5 in (4,585 mm) long and the wagon is 181.3 in (4,605 mm) long. The sedan needs about 51 ft (15.5 m) of film and the wagon needs about 54 ft (16.5 m).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) for the sedan to 54 ft (16.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Lancer Ralliart

A partial wrap on a Lancer Ralliart includes the roof, hood, and mirror caps. A Lancer Ralliart chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. These smaller jobs use less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mitsubishi Lancer Ralliart: body, cut-outs and film

The Mitsubishi Lancer Ralliart vinyl wrap changes with the body style because the car came as a hatchback, sedan, or wagon. The tenth generation hatchback is 179.9 in (4,570 mm) long and needs about 57 ft (17.5 m) of film. The sedan is 180.5 in (4,585 mm) long and needs about 56 ft (17 m). A professional installer uses the style to plan the panel layout and order the right amount of film.

Lancer Ralliart wrap ideas must account for the tailgate with the rear glass in it. The film ends at the edge of the glass on both generations. Door handles, mirror caps, and badges are removed for a clean install. The installer cuts around the fuel filler and the antennas.

How much vinyl to wrap a Lancer Ralliart depends on the generation and the body style. The ninth-generation sedan needs about 51 ft (15.5 m) and the wagon needs about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. The tenth-generation sedan needs about 56 ft (17 m) and the hatchback needs about 57 ft (17.5 m). Chrome or patterned film adds waste, so the estimate rises to about 67–70 ft (20.5–21.5 m).

Questions about wrapping a Mitsubishi Lancer Ralliart

How much vinyl does it take to wrap a Mitsubishi Lancer Ralliart?

A full wrap of the newest Mitsubishi Lancer Ralliart takes about 56 ft (17 m) of 60-inch (1.52 m) cast film for the sedan. The hatchback body takes about 57 ft (17.5 m) of the same film. Those figures assume a standard color change with minimal waste. A chrome or patterned film can need up to about 67 ft (20.5 m).

Which Lancer Ralliart body takes more film?

The Lancer Ralliart body that takes more film in the tenth generation is the hatchback at about 57 ft (17.5 m), compared to the sedan at about 56 ft (17 m). The ninth-generation wagon takes about 54 ft (16.5 m), slightly more than the sedan at about 51 ft (15.5 m). The hatchback and wagon have larger rear panels and extra glass edges. A chrome or patterned film raises the total on any style.

Can I wrap only the hood or the roof of a Lancer Ralliart?

Yes, you can wrap only the hood or the roof of a Lancer Ralliart as a partial wrap. The partial wrap options include the roof, hood, and mirror caps. A Lancer Ralliart chrome delete covers the window trim and badges. Paint protection film (PPF) is also available for just the front end.

Is a Lancer Ralliart hard to wrap?

A Lancer Ralliart is moderate to wrap, but the tailgate with the rear glass in it adds work. The film ends at the edge of the glass on both generations. The compact size means about 56 ft (17 m) of film for a tenth-generation sedan. Door handles, mirror caps, and badges are removed for a clean install, which takes extra time.