Wraps by car

Mitsubishi Minicab wrap

The Mitsubishi Minicab wrap page covers the first-generation van produced from 1999 to 2014. This catalog includes one generation and gives film estimates for a full vinyl wrap of the newest body. The estimate is about 49 ft (15 m) of 60-inch (1.52 m) cast film for a standard wrap.

1generations15 mof film for a full wrap

Mitsubishi Minicab, first generation, factory photo
Mitsubishi Minicab, first generation. Factory color shown.

Mitsubishi Minicab wrap colors and ideas

  • Minicab black wrap
  • Minicab white wrap
  • Minicab gray wrap
  • Minicab silver wrap
  • Minicab red wrap
  • Minicab blue wrap
  • Minicab green wrap
  • Minicab yellow wrap
  • Minicab orange wrap
  • Minicab purple wrap
  • Minicab pink wrap
  • Minicab teal wrap
  • Minicab brown wrap
  • Minicab gold wrap
  • Minicab chrome wrap
  • Minicab color shift wrap
  • Minicab carbon fiber wrap
  • Minicab camo and patterned wrap

How much vinyl to wrap a Mitsubishi Minicab

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1999–2014van (5 doors)133.7 in (3,395 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Minicab wrap cost factors

Minicab wrap cost depends on the size of the van, the film you pick, and the amount of disassembly and cut work. The standard body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film, while chrome or patterned film needs about 56 ft (17 m). The sliding door tracks and the tall roof add labor, which affects the final cost.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.
  • A tall body (74.4 in (1,890 mm)): the roof is wrapped from a platform.

Minicab wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Minicab, first generation, factory photo
Factory color shown

1999–2014 Minicab van (first generation)

1999–2014van (5 doors)133.7 in (3,395 mm)

The first-generation Minicab from 1999 to 2014 has sliding side doors, and the tracks stay bare and decide where the film is cut. The van body is 133.7 in (3,395 mm) long and has five doors. For a full wrap, the standard estimate is about 49 ft (15 m) of 60-inch (1.52 m) cast film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

A tall body (74.4 in (1,890 mm)): the roof is wrapped from a platform.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Minicab

A partial wrap on a Minicab can cover the roof, hood, and mirror caps, while chrome delete covers the window trim and badges. Paint protection film (PPF) is clear film applied to the front end. These smaller jobs use less film than a full wrap and focus on specific areas.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mitsubishi Minicab: body, cut-outs and film

The Mitsubishi Minicab vinyl wrap has to deal with a tall, boxy minivan body that measures 133.7 in (3,395 mm) in length. The five-door van body has large flat panels that make the film application straightforward. The tall body means the roof is best wrapped from a platform, not from the ground.

Minicab wrap ideas should account for the sliding side doors, because the door tracks stay bare and the film is cut along them. Plug-in and electric versions have a charge port door that is wrapped as a small piece of its own. The tall body at 74.4 in (1,890 mm) means the roof is wrapped from a platform.

How much vinyl to wrap a Minicab depends on the standard body, which needs about 49 ft (15 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the estimate goes up to about 56 ft (17 m). The single generation from 1999 to 2014 has one body style, so film quantities stay the same for all years.

Questions about wrapping a Mitsubishi Minicab

How much vinyl does it take to wrap a Mitsubishi Minicab?

A full wrap of a Mitsubishi Minicab takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. If you use chrome or patterned film, the estimate is about 56 ft (17 m). The car has a tall, boxy body, so the roof adds area to cover.

Are the sliding doors of a Minicab wrapped?

The sliding side doors of a Minicab are wrapped, but the tracks stay bare. The film is cut along the tracks so the doors can still open and close. The installer trims the vinyl to follow the door track lines.

Can I wrap only the hood or the roof of a Minicab?

You can wrap only the hood or the roof of a Minicab as part of a partial wrap. The partial wrap also includes the mirror caps, and chrome delete covers the window trim and badges. Paint protection film is another option for the front end.

Is a Minicab hard to wrap?

A Minicab is moderately hard to wrap because of its tall roof, sliding doors, and charge port door on some versions. The roof is 74.4 in (1,890 mm) high, so installers work from a platform. The sliding door tracks require precise cutting, and the charge port door is wrapped as a separate piece.