Wraps by car

Mitsubishi Pajero iO wrap

A Mitsubishi Pajero iO wrap is a color change or protection film applied to this compact SUV. This page covers the single generation produced from 1998 to 2007. A full wrap of the newest body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds about 7 ft to the total.

1generations16.5 mof film for a full wrap

Mitsubishi Pajero iO, first generation, factory photo
Mitsubishi Pajero iO, first generation. Factory color shown.

Mitsubishi Pajero iO wrap colors and ideas

  • Pajero iO black wrap
  • Pajero iO white wrap
  • Pajero iO gray wrap
  • Pajero iO silver wrap
  • Pajero iO red wrap
  • Pajero iO blue wrap
  • Pajero iO green wrap
  • Pajero iO yellow wrap
  • Pajero iO orange wrap
  • Pajero iO purple wrap
  • Pajero iO pink wrap
  • Pajero iO teal wrap
  • Pajero iO brown wrap
  • Pajero iO gold wrap
  • Pajero iO chrome wrap
  • Pajero iO color shift wrap
  • Pajero iO carbon fiber wrap
  • Pajero iO camo and patterned wrap

How much vinyl to wrap a Mitsubishi Pajero iO

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1998–2007SUV (3 or 5 doors)144.7 in (3,675 mm) to 156.5 in (3,975 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Pajero iO wrap cost factors

A Pajero iO wrap cost depends on the film type, the body size, and the number of cut-outs. A 5-door SUV uses more material than a 3-door, and chrome or patterned film adds about 7 ft (2.1 m) of film. Removing the door handles, mirrors, and roof rails adds labor time.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: SUV (3 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Pajero iO wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Pajero iO, first generation, factory photo
Factory color shown

1998–2007 Pajero iO SUV (first generation)

1998–2007SUV (3 or 5 doors)144.7 in (3,675 mm) to 156.5 in (3,975 mm)

The first generation Mitsubishi Pajero iO has paint from 1998 to 2007, so panels may be original or repainted. A test spot on each panel checks paint adhesion before a full wrap. Cast film conforms to the boxy panels and the tailgate edges.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Pajero iO

A partial wrap on a Pajero iO covers the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mitsubishi Pajero iO: body, cut-outs and film

The Mitsubishi Pajero iO vinyl wrap must cover either a 3-door or a 5-door SUV body. The 5-door is longer, up to 156.5 in (3,975 mm), so it uses more film than the 3-door. Both bodies have straight panels and a boxy shape that makes film sizing direct. The wrap installer measures the roof, hood, and each door before cutting.

Pajero iO wrap ideas start with the black or chrome trim on the doors and bumpers. The rear tailgate includes the glass, so the film ends at the edge of that glass. Door handles, mirrors, and the roof rails need cut-outs or removal for a clean finish. Some installers remove the spare tire carrier on the tailgate before wrapping.

To know how much vinyl to wrap a Pajero iO, you compare the body length and the number of doors. The only generation spans 1998 to 2007, but early and late versions share the same 3-door and 5-door bodies. A 5-door body from 2007 is longer than a 3-door from 1998, so film needs differ by about 12 in per side.

Questions about wrapping a Mitsubishi Pajero iO

How much vinyl does it take to wrap a Mitsubishi Pajero iO?

A full wrap of a Mitsubishi Pajero iO takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds about 7 ft (2.1 m), for about 61 ft (18.5 m).

Can I wrap only the hood or the roof of a Pajero iO?

Yes, you can wrap only the hood or the roof of a Pajero iO. A partial wrap can cover the roof, hood, or mirror caps as separate jobs.

Is a Pajero iO hard to wrap?

A Pajero iO is not hard to wrap, but the tailgate with the rear glass adds one step: the film ends at the edge of that glass. The boxy panels and straight lines of the SUV shape make the main panels simple.

How many generations of the Pajero iO does this page cover?

This page covers one generation of the Pajero iO, produced from 1998 to 2007.