Wraps by car

Mitsubishi Pajero Mini wrap

This page covers the Mitsubishi Pajero Mini and its two generations from 1994 to 2012. A full vinyl wrap of either generation takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 51 ft (15.5 m). The compact SUV body means a wrap uses less material than a larger vehicle.

2generations14 mof film for a full wrap

Mitsubishi Pajero Mini, second generation, factory photo
Mitsubishi Pajero Mini, second generation. Factory color shown.

Mitsubishi Pajero Mini wrap colors and ideas

  • Pajero Mini black wrap
  • Pajero Mini white wrap
  • Pajero Mini gray wrap
  • Pajero Mini silver wrap
  • Pajero Mini red wrap
  • Pajero Mini blue wrap
  • Pajero Mini green wrap
  • Pajero Mini yellow wrap
  • Pajero Mini orange wrap
  • Pajero Mini purple wrap
  • Pajero Mini pink wrap
  • Pajero Mini teal wrap
  • Pajero Mini brown wrap
  • Pajero Mini gold wrap
  • Pajero Mini chrome wrap
  • Pajero Mini color shift wrap
  • Pajero Mini carbon fiber wrap
  • Pajero Mini camo and patterned wrap

How much vinyl to wrap a Mitsubishi Pajero Mini

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1998–2012SUV (3 doors)129.7 in (3,295 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)
1994–1998SUV (3 doors)129.7 in (3,295 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)

Pajero Mini wrap cost factors

The Pajero Mini wrap cost depends on the film type, the number of panels, and the condition of the paint. The car has a tailgate, two long side doors, a hood, a roof, and mirror caps, so each panel adds labor time. Since the body length is 129.7 in (3,295 mm), a full wrap uses about 46 ft (14 m) of film, while chrome or patterned film uses about 51 ft (15.5 m). If the paint is aged or repainted, extra preparation work can increase the total.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).
  • Body: SUV (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

Pajero Mini wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Pajero Mini, second generation, factory photo
Factory color shown

1998–2012 Pajero Mini SUV (second generation)

1998–2012SUV (3 doors)129.7 in (3,295 mm)

The second generation Mitsubishi Pajero Mini was produced from 1998 to 2012 as a three-door SUV. Paint age on a car of these years may be original or repainted, and a test spot comes before a full wrap. This step checks that the film adheres properly and that removal will not damage the paint. The film estimate for this generation is about 46 ft (14 m) of 60-inch (1.52 m) cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Mitsubishi Pajero Mini, first generation, factory photo
Factory color shown

1994–1998 Pajero Mini SUV (first generation)

1994–1998SUV (3 doors)129.7 in (3,295 mm)

The first generation Mitsubishi Pajero Mini was built from 1994 to 1998 with the same three-door SUV body. Its size of 129.7 in (3,295 mm) and boxy shape mean the film amount is about 46 ft (14 m) of 60-inch (1.52 m) cast film. The body style has few complex curves, so the number of panels is low: hood, roof, two doors, tailgate, and bumpers. This generation's wrap process is similar to the later one because the dimensions match.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on a Pajero Mini

A partial wrap on the Pajero Mini can cover the roof, hood, and mirror caps. A chrome delete uses black film on the window trim and badges for a cleaner look. Paint protection film (PPF) can be applied as clear film on the front end to guard against stone chips. These smaller jobs use less material and can refresh the appearance without a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mitsubishi Pajero Mini: body, cut-outs and film

The Mitsubishi Pajero Mini vinyl wrap suits a three-door SUV with a length of 129.7 in (3,295 mm). Both generations share the same body size, so the number of panels and film amount stay identical. The small footprint keeps the wrap project manageable and reduces the film needed compared with full-size SUVs. A single installer can handle each side in one piece because the doors are long.

For Pajero Mini wrap ideas, note that the tailgate includes the rear glass, so the film ends neatly at the glass edge. The two long side doors are each wrapped as one large piece of film, which reduces seams. You can also add a chrome delete for the window trim and badges using black vinyl. Paint protection film (PPF) on the front end is another option for clear protection.

To know how much vinyl to wrap a Pajero Mini, the amount is the same for both generations: about 46 ft (14 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 51 ft (15.5 m) because of the need to align patterns. The identical dimensions across generations mean you can order the same film quantity for any 1994 to 2012 model. Always add a little extra for mistakes or complex areas.

Questions about wrapping a Mitsubishi Pajero Mini

How much vinyl does it take to wrap a Mitsubishi Pajero Mini?

It takes about 46 ft (14 m) of 60-inch (1.52 m) cast film to fully wrap a Mitsubishi Pajero Mini. For chrome or patterned film, plan for about 51 ft (15.5 m). These figures apply to both generations because the body dimensions are identical.

Can I wrap only the hood or the roof of a Pajero Mini?

Yes, you can wrap only the hood or the roof of a Pajero Mini. These partial wraps are common ways to change the look without covering the whole car. You can also wrap the mirror caps or do a chrome delete on the window trim and badges.

Is a Pajero Mini hard to wrap?

The Pajero Mini is not overly hard to wrap, but the tailgate with rear glass requires careful trimming because the film ends at the glass edge. The two long side doors are large pieces, so you need to manage a bigger sheet of film. The small size of the car makes it easier to reach all areas, but patience is still needed for clean edges.

How many generations of the Pajero Mini does this page cover?

This page covers two generations of the Mitsubishi Pajero Mini. The first generation ran from 1994 to 1998, and the second generation ran from 1998 to 2012. Both have the same three-door SUV body and film requirements.