Wraps by car

Mitsubishi Sapporo wrap

The Mitsubishi Sapporo wrap page covers two generations of this mid-size car and the vinyl wrap film a full body wrap of the newest body takes. The catalog spans the first generation coupe from 1978 to 1984 and the second generation sedan from 1987 to 1990. A full wrap of the 1987–1990 sedan uses about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. This page helps owners of either generation plan the material, the preparation and the partial jobs.

2generations15.5 mof film for a full wrap

Mitsubishi Sapporo, second generation, factory photo
Mitsubishi Sapporo, second generation. Factory color shown.

Mitsubishi Sapporo wrap colors and ideas

  • Sapporo black wrap
  • Sapporo white wrap
  • Sapporo gray wrap
  • Sapporo silver wrap
  • Sapporo red wrap
  • Sapporo blue wrap
  • Sapporo green wrap
  • Sapporo yellow wrap
  • Sapporo orange wrap
  • Sapporo purple wrap
  • Sapporo pink wrap
  • Sapporo teal wrap
  • Sapporo brown wrap
  • Sapporo gold wrap
  • Sapporo chrome wrap
  • Sapporo color shift wrap
  • Sapporo carbon fiber wrap
  • Sapporo camo and patterned wrap

How much vinyl to wrap a Mitsubishi Sapporo

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1987–1990sedan (4 doors)180.3 in (4,580 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)
1978–1984coupe (2 doors)178.1 in (4,525 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Sapporo wrap cost factors

The Sapporo wrap cost depends mainly on the size of the car, the film type and the number of parts that must come off. The first generation coupe needs about 49 ft (15 m) of film, the second generation sedan about 51 ft (15.5 m). A chrome delete or a partial wrap on the roof and hood uses less film than a full wrap and so costs less. Installers also charge for the time spent on doors, badges and trims.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: sedan (4 doors).

Sapporo wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Sapporo, second generation, factory photo
Factory color shown

1987–1990 Sapporo sedan (second generation)

1987–1990sedan (4 doors)180.3 in (4,580 mm)

The second generation Sapporo is the 1987–1990 sedan on this page. On a car of these years the panels may be original or repainted, and a test spot comes before a full wrap. The paint may be old enough that some areas have been repaired, so the installer has to check each panel. A test spot shows whether the film will stick evenly before the full 51 ft (15.5 m) of vinyl is applied.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Mitsubishi Sapporo, first generation, factory photo
Factory color shown

1978–1984 Sapporo coupe (first generation)

1978–1984coupe (2 doors)178.1 in (4,525 mm)

The first generation Sapporo is the 1978–1984 coupe covered on this page. The coupe body is shorter than the sedan and has only two long doors, so the film is split into fewer large panels. Each door is one large piece of film, and the whole body uses about 49 ft (15 m) of 60-inch material. For this car, a wrap installer has to handle long pieces over the hood and the roof as well.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Sapporo

A partial wrap on a Sapporo can cover the roof, the hood or the mirror caps. A Sapporo chrome delete covers the window trim and the badges with black film. Paint protection film (PPF) is a clear film option for the front end of the car. These jobs use less material than a full wrap and can be done on either generation.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mitsubishi Sapporo: body, cut-outs and film

A Mitsubishi Sapporo vinyl wrap has to cover the clean lines of a two-door coupe or a four-door sedan. The first generation measures 178.1 in (4,525 mm) long and needs about 49 ft (15 m) of film for a full color change. The second generation is slightly longer at 180.3 in (4,580 mm) and uses about 51 ft (15.5 m). The extra doors and the longer body of the sedan add panels and seams to the job.

Sapporo wrap ideas start with the first generation: it has two long side doors, and each door is one large piece of film. On both generations the badges, the door handles and the mirrors have to come off or be cut out by hand. The trim around the windows is another spot that installers wrap carefully. A chrome delete is a clean way to cover the bright trim with black film on this car.

How much vinyl to wrap a Sapporo depends on the body style and the year. The 1978–1984 coupe takes about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full wrap. The 1987–1990 sedan takes about 51 ft (15.5 m) of the same material. For chrome or patterned film, add about 10 ft (3 m) to either figure because of the extra film needed for the bright trim.

Questions about wrapping a Mitsubishi Sapporo

How much vinyl does it take to wrap a Mitsubishi Sapporo?

A Mitsubishi Sapporo wrap uses about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for the newest body, the 1987–1990 sedan. That figure covers the painted panels of the car. For chrome or patterned film, use about 62 ft (19 m) instead.

Can I wrap only the hood or the roof of a Sapporo?

Yes, you can wrap only the hood or the roof of a Sapporo. A partial wrap on this car may also include the mirror caps. These jobs are smaller than a full wrap and can be done on either generation.

Is a Sapporo hard to wrap?

A Sapporo is not hard to wrap, but the first generation adds work with its two long side doors, since each door is one large piece of film. The sedan has four doors and a longer body, which means more panels and seams. On both cars the badges and trims have to be removed or cut out by hand.

How many generations of the Sapporo does this page cover?

This page covers two generations of the Sapporo: the first generation coupe from 1978 to 1984 and the second generation sedan from 1987 to 1990.