Wraps by car

Mitsubishi Savrin wrap

The Mitsubishi Savrin wrap covers two generations of this five-door minivan, produced from 2001 to 2014. A full wrap of the newest body takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 80 ft (24.5 m) on that same body.

2generations

Mitsubishi Savrin, second generation, factory photo
Mitsubishi Savrin, second generation. Factory color shown.

Mitsubishi Savrin wrap colors and ideas

  • Savrin black wrap
  • Savrin white wrap
  • Savrin gray wrap
  • Savrin silver wrap
  • Savrin red wrap
  • Savrin blue wrap
  • Savrin green wrap
  • Savrin yellow wrap
  • Savrin orange wrap
  • Savrin purple wrap
  • Savrin pink wrap
  • Savrin teal wrap
  • Savrin brown wrap
  • Savrin gold wrap
  • Savrin chrome wrap
  • Savrin color shift wrap
  • Savrin carbon fiber wrap
  • Savrin camo and patterned wrap

How much vinyl to wrap a Mitsubishi Savrin

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2004–2014van (5 doors)——
2001–2004van (5 doors)185.0 in (4,700 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)

Savrin wrap cost factors

Savrin wrap cost depends on the film type and the size of the van. A full wrap of the first generation takes about 67 ft (20.5 m) of cast film, while chrome or patterned film takes about 80 ft (24.5 m). The sliding door tracks and the removal of parts like mirrors and badges add labor.

  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Savrin wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Savrin, second generation, factory photo
Factory color shown

2004–2014 Savrin van (second generation)

2004–2014van (5 doors)

The second generation Savrin, sold from 2004 to 2014, keeps the sliding side doors of the first generation. The door tracks stay bare and decide where the film is cut along the lower body. The installer trims the film parallel to the tracks to avoid peeling.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Mitsubishi Savrin, first generation, factory photo
Factory color shown

2001–2004 Savrin van (first generation)

2001–2004van (5 doors)185.0 in (4,700 mm)

The first generation Savrin, built from 2001 to 2004, is a van with a length of 185.0 in (4,700 mm). Paint age matters on a car of these years, as panels may be original or repainted. A test spot comes before a full wrap to check that the paint will hold the film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Roof, hood, chrome delete and PPF on a Savrin

Partial wrap on a Savrin can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mitsubishi Savrin: body, cut-outs and film

The Mitsubishi Savrin vinyl wrap suits a boxy five-door van body that is 185.0 in (4,700 mm) long on the newest generation. Large flat side panels and a tall roof line make film installation direct. The sliding side doors are the main detail to work around, as their tracks stay bare.

Savrin wrap ideas start with the sliding doors, because the door tracks stay bare and the film is cut along them. The front and rear bumpers, door handles, mirrors, and badges are removed for a clean finish. The window trims and badges can also be covered with black film for a chrome delete.

To know how much vinyl to wrap a Savrin, compare the two generations. The second generation, from 2004 to 2014, has no length in our data, but the body shape is similar to the first generation. The first generation, from 2001 to 2004, is 185.0 in (4,700 mm) long and needs about 67 ft (20.5 m) of standard cast film. Add about 13 ft (4 m) more for chrome or patterned film on that body.

Questions about wrapping a Mitsubishi Savrin

How much vinyl does it take to wrap a Mitsubishi Savrin?

It takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film to wrap a Mitsubishi Savrin of the newest generation. For chrome or patterned film, the estimate is about 80 ft (24.5 m). These figures cover a full color change wrap of the exterior.

Are the sliding doors of a Savrin wrapped?

Yes, the sliding doors of a Savrin are wrapped, but the tracks stay bare. The film is cut along the tracks so the doors can open and close freely. This leaves a clean edge that follows the door line.

Can I wrap only the hood or the roof of a Savrin?

Yes, you can wrap only the hood or the roof of a Savrin. A partial wrap is available for the roof, hood, or mirror caps. You can also choose a chrome delete for the window trim and badges or paint protection film for the front end.

Is a Savrin hard to wrap?

A Savrin is not the hardest van to wrap, but the sliding doors add work. The door tracks stay bare, so the film must be cut precisely along them. The size of the van, 185.0 in (4,700 mm) long on the first generation, also means more film and more time.