Wraps by car

Mitsubishi Sigma wrap

The Mitsubishi Sigma wrap page covers the single generation produced from 1990 to 1996, in sedan and wagon body styles. A full vinyl wrap for this mid-size car takes about 57 ft (17.5 m) of film on the sedan, or up to 64 ft (19.5 m) on the wagon, using 60-inch (1.52 m) cast film. Chrome or patterned film adds extra material, up to about 74 ft (22.5 m).

1generations19.5 mof film for a full wrap

Mitsubishi Sigma, first generation, factory photo
Mitsubishi Sigma, first generation. Factory color shown.

Mitsubishi Sigma wrap colors and ideas

  • Sigma black wrap
  • Sigma white wrap
  • Sigma gray wrap
  • Sigma silver wrap
  • Sigma red wrap
  • Sigma blue wrap
  • Sigma green wrap
  • Sigma yellow wrap
  • Sigma orange wrap
  • Sigma purple wrap
  • Sigma pink wrap
  • Sigma teal wrap
  • Sigma brown wrap
  • Sigma gold wrap
  • Sigma chrome wrap
  • Sigma color shift wrap
  • Sigma carbon fiber wrap
  • Sigma camo and patterned wrap

How much vinyl to wrap a Mitsubishi Sigma

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1990–1996sedan, wagon (4 or 5 doors)186.6 in (4,740 mm) to 189.0 in (4,800 mm)about 57 ft (17.5 m) for the sedan to 64 ft (19.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m)

Sigma wrap cost factors

Sigma wrap cost depends on the film type, the body style, and the amount of disassembly. A full color change on the wagon uses more material than the sedan, so it costs more in film. Cast vinyl is a higher-grade film that conforms better to the Sigma's curves, while chrome delete adds extra labor for cutting and wrapping small parts. The size of the panels and the tailgate on the wagon also affect how many hours the installer needs.

  • Film for a full wrap: about 57 ft (17.5 m) for the sedan to 64 ft (19.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).
  • Body: sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Sigma wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Sigma, first generation, factory photo
Factory color shown

1990–1996 Sigma sedan, wagon (first generation)

1990–1996sedan, wagon (4 or 5 doors)186.6 in (4,740 mm) to 189.0 in (4,800 mm)

The first generation Mitsubishi Sigma, built from 1990 to 1996, came as a four-door sedan or a five-door wagon. The body style you have decides the panel plan and the film amount. The sedan is about 186.6 in (4,740 mm) long, while the wagon reaches about 189.0 in (4,800 mm). Because the wagon has a tailgate, it requires more film than the sedan for a full wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 57 ft (17.5 m) for the sedan to 64 ft (19.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Sigma

Partial wrap options for the Mitsubishi Sigma include the roof, hood, and mirror caps. A Sigma chrome delete covers the window trim and badges with black film. Paint protection film (PPF) on the front end uses clear film to guard the bumper, hood, and fenders. These smaller jobs are a good way to change the look or add protection without wrapping the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mitsubishi Sigma: body, cut-outs and film

A Mitsubishi Sigma vinyl wrap is a straightforward job because the body styles are conventional, with a length from 186.6 in (4,740 mm) to 189.0 in (4,800 mm). The sedan has a separate trunk, so the rear bumper and trunk lid are wrapped as simple panels. The wagon adds a large tailgate, which increases the total film area. These sizes mean a full wrap uses about 57 ft (17.5 m) of film on the sedan and up to 64 ft (19.5 m) on the wagon.

Sigma wrap ideas should account for a tailgate with the rear glass in it, since the film ends at the edge of the glass. The door handles, mirrors, and trim pieces need to be removed or carefully cut around. The front and rear bumpers are large enough to require extra time for stretching and tucking. Planning for these cut-outs keeps the wrap clean and reduces the chance of lifting edges.

How much vinyl to wrap a Sigma depends on the body style you choose. The sedan needs about 57 ft (17.5 m) of 60-inch (1.52 m) cast film, while the wagon needs about 64 ft (19.5 m) of the same material. Adding chrome delete or a patterned film pushes the total to about 74 ft (22.5 m). Since there is only one generation, the panel sizes stay the same across all production years.

Questions about wrapping a Mitsubishi Sigma

How much vinyl does it take to wrap a Mitsubishi Sigma?

How much vinyl does it take to wrap a Mitsubishi Sigma? It takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film for the sedan, and up to 64 ft (19.5 m) for the wagon. If you use chrome or patterned film, the total can go up to about 74 ft (22.5 m).

Which Sigma body takes more film?

Which Sigma body takes more film? The wagon takes more film than the sedan because it has a larger rear end with a tailgate. The wagon needs about 64 ft (19.5 m) of 60-inch (1.52 m) cast film, while the sedan needs about 57 ft (17.5 m) of the same material.

Can I wrap only the hood or the roof of a Sigma?

Can I wrap only the hood or the roof of a Sigma? Yes, a partial wrap on the hood, roof, or mirror caps is a common smaller job. These areas can be wrapped individually to change the look or add protection without doing the whole car.

Is a Sigma hard to wrap?

Is a Sigma hard to wrap? No, it is not a hard car to wrap, but a few points add work. The tailgate with the rear glass in it means the film ends at the edge of the glass, so it needs precise cutting. The car's size, at 186.6 in (4,740 mm) or more, means you need long pieces of film and a helper for the roof and hood.