Wraps by car

Mitsubishi Space Runner wrap

A Mitsubishi Space Runner wrap covers this two-generation minivan with a full color change or paint protection film. The catalog holds the 1991–1999 first generation and the 1999–2002 second generation. A full wrap of the newest body takes about 62 ft (19 m) of 60-inch (1.52 m) cast vinyl wrap.

2generations19 mof film for a full wrap

Mitsubishi Space Runner, second generation, factory photo
Mitsubishi Space Runner, second generation. Factory color shown.

Mitsubishi Space Runner wrap colors and ideas

  • Space Runner black wrap
  • Space Runner white wrap
  • Space Runner gray wrap
  • Space Runner silver wrap
  • Space Runner red wrap
  • Space Runner blue wrap
  • Space Runner green wrap
  • Space Runner yellow wrap
  • Space Runner orange wrap
  • Space Runner purple wrap
  • Space Runner pink wrap
  • Space Runner teal wrap
  • Space Runner brown wrap
  • Space Runner gold wrap
  • Space Runner chrome wrap
  • Space Runner color shift wrap
  • Space Runner carbon fiber wrap
  • Space Runner camo and patterned wrap

How much vinyl to wrap a Mitsubishi Space Runner

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1999–2002van (4 doors)168.9 in (4,290 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)
1991–1999van (4 doors)168.1 in (4,270 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Space Runner wrap cost factors

Space Runner wrap cost depends mainly on the film type and the condition of the painted surfaces, not on the size of this car. A full wrap uses about 62 ft (19 m) of 60-inch (1.52 m) cast film, and chrome or patterned film raises that to about 72 ft (22 m). An older van with repainted panels may need extra prep work before the film is laid.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: van (4 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Space Runner wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Space Runner, second generation, factory photo
Factory color shown

1999–2002 Space Runner van (second generation)

1999–2002van (4 doors)168.9 in (4,290 mm)

The second-generation Mitsubishi Space Runner (1999–2002) is a four-door van with sliding side doors. The tracks stay bare and decide where the film is cut along each side of the body. Wrapping this generation is otherwise straightforward, with large flat doors and a boxy rear end.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Mitsubishi Space Runner, first generation, factory photo
Factory color shown

1991–1999 Space Runner van (first generation)

1991–1999van (4 doors)168.1 in (4,270 mm)

The first-generation Mitsubishi Space Runner (1991–1999) is the older of the two bodies in this catalog. Paint age matters on a car of these years because panels may be original or repainted, and a test spot comes before a full wrap. Installers check adhesion on each panel before stretching film over the whole van.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Space Runner

A partial wrap on a Space Runner covers the roof, hood or mirror caps as separate smaller jobs. A chrome delete covers the window trim and badges with black film, which suits this van's bright strips. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mitsubishi Space Runner: body, cut-outs and film

A Mitsubishi Space Runner vinyl wrap has to manage a compact minivan body with two sliding side doors. Both generations are four-door vans of nearly the same length: 168.9 in (4,290 mm) for the second and 168.1 in (4,270 mm) for the first. The tall sides and flat roof add surface area, so film use is close to that of a small modern crossover.

Space Runner wrap ideas should work around the sliding side doors. The door tracks stay bare, and the film is cut along them so the doors still slide cleanly. Door handles, mirrors and badges are removed for a neat edge and then reinstalled over the film.

How much vinyl to wrap a Space Runner depends on the generation, but the difference is small. Both first and second generation vans need about 62 ft (19 m) of 60-inch (1.52 m) cast film for a standard color change wrap. Chrome or patterned film adds about 10 ft (3 m), so plan for about 72 ft (22 m) in total.

Questions about wrapping a Mitsubishi Space Runner

How much vinyl does it take to wrap a Mitsubishi Space Runner?

A full wrap of a Mitsubishi Space Runner takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 72 ft (22 m) because the pattern must be aligned across panels.

Are the sliding doors of a Space Runner wrapped?

Yes, the sliding doors of a Space Runner are wrapped, but the tracks stay bare. The film is cut along the tracks so the doors open and close without catching or peeling the vinyl.

Can I wrap only the hood or the roof of a Space Runner?

Yes, you can wrap only the hood or the roof of a Space Runner. A partial wrap on this van typically covers the roof, hood or mirror caps, and it uses much less film than a full wrap.

Is a Space Runner hard to wrap?

A Space Runner is not hard to wrap for an installer, but the sliding doors add work. The tracks stay bare and require careful cutting, and the tall sides call for a second pair of hands with large film panels.