Wraps by car

Mitsubishi Starion wrap

The Mitsubishi Starion wrap page covers this 1985–1990 sports car, a single-generation model offered only as a three-door hatchback. A full wrap of the newest body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. A chrome or patterned vinyl wrap uses about 57 ft (17.5 m) of the same width.

1generations15.5 mof film for a full wrap

Mitsubishi Starion, first generation, factory photo
Mitsubishi Starion, first generation. Factory color shown.

Mitsubishi Starion wrap colors and ideas

  • Starion black wrap
  • Starion white wrap
  • Starion gray wrap
  • Starion silver wrap
  • Starion red wrap
  • Starion blue wrap
  • Starion green wrap
  • Starion yellow wrap
  • Starion orange wrap
  • Starion purple wrap
  • Starion pink wrap
  • Starion teal wrap
  • Starion brown wrap
  • Starion gold wrap
  • Starion chrome wrap
  • Starion color shift wrap
  • Starion carbon fiber wrap
  • Starion camo and patterned wrap

How much vinyl to wrap a Mitsubishi Starion

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1985–1990hatchback (3 doors)173.6 in (4,410 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Starion wrap cost factors

Starion wrap cost depends on the size of the car and the condition of its paint. At 173.6 in (4,410 mm) long, the car needs about 51 ft (15.5 m) of film for a full wrap. The amount of prep work changes with how much correction the original or repainted panels require.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

Starion wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Starion, first generation, factory photo
Factory color shown

1985–1990 Starion hatchback (first generation)

1985–1990hatchback (3 doors)173.6 in (4,410 mm)

The first generation Mitsubishi Starion was produced from 1985 to 1990 as a three-door hatchback. Paint age varies on a car of these years, so panels may be original or repainted. A test spot comes before a full wrap to check film adhesion on the existing paint.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Starion

A partial wrap on a Starion can cover the roof, hood, or mirror caps. A chrome delete uses black film on the window trim and badges. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mitsubishi Starion: body, cut-outs and film

A Mitsubishi Starion vinyl wrap is shaped by its single body style and modest size. The three-door hatchback is 173.6 in (4,410 mm) long, so film is worked around a tailgate that includes the rear glass. The two long side doors each take one large piece of film, which reduces visible seams.

Starion wrap ideas begin with the parts that need cut-outs or come off. The tailgate has the rear glass in it, so the film ends at the edge of the glass rather than wrapping around it. The long side doors each receive one large piece of film, and door handles, mirrors, and trim are removed for a clean install.

How much vinyl to wrap a Starion depends on the generation you have. This page covers the only generation, produced from 1985 to 1990. The single body style keeps the film estimate at about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for a full color change wrap.

Questions about wrapping a Mitsubishi Starion

How much vinyl does it take to wrap a Mitsubishi Starion?

A full Mitsubishi Starion wrap takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. That figure covers the newest body of the only generation, the three-door hatchback. If you choose chrome or patterned film, plan on about 57 ft (17.5 m).

Can I wrap only the hood or the roof of a Starion?

Yes, you can wrap only the hood or the roof of a Starion. A partial wrap on this car is often done on the roof, hood, or mirror caps. You can also have a chrome delete on the window trim and badges, or paint protection film on the front end.

Is a Starion hard to wrap?

A Starion wrap has some added work because of the tailgate and the long doors. The tailgate includes the rear glass, so the film must end exactly at the edge of the glass. Each long side door is one large piece, which takes care to position without trapping air.

How many generations of the Starion does this page cover?

This page covers one generation of the Mitsubishi Starion, produced from 1985 to 1990. The car was offered only as a three-door hatchback. No other generations are in this catalog.