Wraps by car

Mitsubishi Strada wrap

The Mitsubishi Strada wrap page covers the two pickup generations sold from 1991 to 1999. A full wrap of the newest body takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast vinyl wrap. The page explains how the bed is handled and which parts need extra work.

2generations19.5 mof film for a full wrap

Mitsubishi Strada, second generation, factory photo
Mitsubishi Strada, second generation. Factory color shown.

Mitsubishi Strada wrap colors and ideas

  • Strada black wrap
  • Strada white wrap
  • Strada gray wrap
  • Strada silver wrap
  • Strada red wrap
  • Strada blue wrap
  • Strada green wrap
  • Strada yellow wrap
  • Strada orange wrap
  • Strada purple wrap
  • Strada pink wrap
  • Strada teal wrap
  • Strada brown wrap
  • Strada gold wrap
  • Strada chrome wrap
  • Strada color shift wrap
  • Strada carbon fiber wrap
  • Strada camo and patterned wrap

How much vinyl to wrap a Mitsubishi Strada

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1997–1999pickup (4 doors)193.7 in (4,920 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
1991–1997pickup (4 doors)193.7 in (4,920 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Strada wrap cost factors

Strada wrap cost depends on the amount of film, the body size, and the labor for the pickup bed. The truck is 193.7 in (4,920 mm) long, and every generation is a four-door pickup. The cab and the bed are wrapped separately, which adds time and material for cutting. The roof height on the second generation also adds setup work.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: pickup (4 doors).
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.
  • A tall body (68.9 in (1,750 mm)): the roof is wrapped from a platform.

Strada wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Strada, second generation, factory photo
Factory color shown

1997–1999 Strada pickup (second generation)

1997–1999pickup (4 doors)193.7 in (4,920 mm)

The second generation Mitsubishi Strada (1997–1999) has a pickup bed that is wrapped as a separate body from the cab. The inside of the bed is not wrapped. Only the outside surfaces of the bed are covered with film.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

A tall body (68.9 in (1,750 mm)): the roof is wrapped from a platform.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Mitsubishi Strada, first generation, factory photo
Factory color shown

1991–1997 Strada pickup (first generation)

1991–1997pickup (4 doors)193.7 in (4,920 mm)

The first generation Mitsubishi Strada (1991–1997) is an older truck, so paint condition can vary between panels. A test spot is done before a full wrap to check if the paint is original or repainted. The pickup bed is also wrapped as a separate body, with the inside left bare.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Strada

Partial wrap on a Mitsubishi Strada covers the roof, hood, or mirror caps instead of the whole truck. For a Strada chrome delete, the window trim and badges are covered with black film. Paint protection film (PPF) is clear film applied to the front end of the truck.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mitsubishi Strada: body, cut-outs and film

The Mitsubishi Strada vinyl wrap is shaped by its pickup body style, which is the only style for both generations. All models are four-door pickups with a length of 193.7 in (4,920 mm). The cab and the bed are separate surfaces, so each is wrapped as its own body. This split changes how the film is planned and cut around the bed.

Strada wrap ideas start with the parts that need cut-outs or come off the truck. Door handles, mirrors, and badges must be removed or cut around carefully. The pickup bed is wrapped on the outside only, while the inside stays bare. The roof on the second generation is high at 68.9 in (1,750 mm), so a platform is needed for installers.

How much vinyl to wrap a Strada depends on the generation, and the difference is small but real for counting film. The second generation (1997–1999) takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. The first generation (1991–1997) takes about 62 ft (19 m) of the same size. Chrome or patterned film adds about 6 to 7 ft (2 to 2.5 m) for both.

Questions about wrapping a Mitsubishi Strada

How much vinyl does it take to wrap a Mitsubishi Strada?

About 64 ft (19.5 m) of 60-inch (1.52 m) cast film is needed to wrap a Mitsubishi Strada of the newest body. That amount covers the full exterior of the second generation pickup. The first generation takes slightly less, about 62 ft (19 m) of the same size film.

Is the bed of a Strada wrapped?

No, the bed of a Strada is not wrapped on the inside. Only the outside of the bed is covered, and the cab and the bed are wrapped as two separate bodies.

Can I wrap only the hood or the roof of a Strada?

Yes, you can wrap only the hood or the roof of a Strada. A partial wrap also includes mirror caps. The roof is wrapped from a platform on the second generation because of its height.

Is a Strada hard to wrap?

A Mitsubishi Strada is not the hardest truck to wrap, but the pickup bed adds work. The cab and the bed are two separate bodies, and the inside of the bed is not wrapped. The second generation also has a tall body at 68.9 in (1,750 mm), so the roof requires a platform.