Wraps by car

Mitsubishi Toppo wrap

The Mitsubishi Toppo wrap page covers three generations of this kei-class mini car. A full vinyl wrap of the newest body uses about 46 ft (14 m) of 60-inch (1.52 m) cast film. The first and second generations share the compact boxy shape that makes this car quick to cover. The third generation adds a more rounded nose and the same short overall length.

3generations14 mof film for a full wrap

Mitsubishi Toppo, third generation, factory photo
Mitsubishi Toppo, third generation. Factory color shown.

Mitsubishi Toppo wrap colors and ideas

  • Toppo black wrap
  • Toppo white wrap
  • Toppo gray wrap
  • Toppo silver wrap
  • Toppo red wrap
  • Toppo blue wrap
  • Toppo green wrap
  • Toppo yellow wrap
  • Toppo orange wrap
  • Toppo purple wrap
  • Toppo pink wrap
  • Toppo teal wrap
  • Toppo brown wrap
  • Toppo gold wrap
  • Toppo chrome wrap
  • Toppo color shift wrap
  • Toppo carbon fiber wrap
  • Toppo camo and patterned wrap

How much vinyl to wrap a Mitsubishi Toppo

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2008–2013hatchback (5 doors)133.7 in (3,395 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)
1998–2004van (5 doors)133.7 in (3,395 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)
1990–1998hatchback (3 doors)129.7 in (3,295 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)

Toppo wrap cost factors

A Toppo wrap cost depends on the film area and the time on the roof and doors. The second generation uses about 51 ft (15.5 m) of film, more than the 44 ft (13.5 m) of the first generation. The tall first-generation body adds work on the roof from a platform. A car with original paint needs less preparation than one with old paint on some panels.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Toppo wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Toppo, third generation, factory photo
Factory color shown

2008–2013 Toppo hatchback (third generation)

2008–2013hatchback (5 doors)133.7 in (3,395 mm)

The third generation Mitsubishi Toppo from 2008 to 2013 has five doors and a tailgate with the rear glass in it. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. The film ends at the edge of the rear glass, so the installer cuts a clean line there. The short body keeps the full wrap at about 46 ft (14 m) of film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Mitsubishi Toppo, second generation, factory photo
Factory color shown

1998–2004 Toppo van (second generation)

1998–2004van (5 doors)133.7 in (3,395 mm)

The second generation Mitsubishi Toppo from 1998 to 2004 is a five-door van with sliding side doors. The sliding side door tracks stay bare and decide where the film is cut along them. The installer leaves the track area uncovered so the doors keep moving freely. This body takes about 51 ft (15.5 m) of film, the most of the three generations.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Mitsubishi Toppo, first generation, factory photo
Factory color shown

1990–1998 Toppo hatchback (first generation)

1990–1998hatchback (3 doors)129.7 in (3,295 mm)

The first generation Mitsubishi Toppo from 1990 to 1998 is a three-door hatchback with a tall body. The height of the body means the roof is wrapped from a platform and takes more time. The tailgate has the rear glass in it, so the film ends at the edge of the glass. Each of the two long side doors is one large piece of film, and the whole car uses about 44 ft (13.5 m).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

A tall body (69.5 in (1,765 mm)): the roof is wrapped from a platform.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on a Toppo

A partial wrap on a Mitsubishi Toppo covers the roof, hood, or mirror caps. A Toppo chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film on the front end to guard against stone chips. These smaller jobs fit the mini body of the Toppo and use less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mitsubishi Toppo: body, cut-outs and film

A Mitsubishi Toppo vinyl wrap is a small job by car standards. The third and second generations measure 133.7 in (3,395 mm) long, and the first is 129.7 in (3,295 mm). Hatchback bodies have a tailgate with the rear glass in it, so the film ends at the edge of the glass. The boxy shape means flat side panels and a short roof take less film than a larger car.

For Toppo wrap ideas, plan around the doors and glass. On the second generation, sliding side doors have tracks that stay bare, and the film is cut along them. On the first and third generations, the tailgate glass means the film stops at its edge. The tall first-generation body stands 69.5 in (1,765 mm) high, so the roof is wrapped from a platform.

When you ask how much vinyl to wrap a Toppo, the generation decides the number. The third generation needs about 46 ft (14 m) of 60-inch (1.52 m) cast film. The boxier second generation needs about 51 ft (15.5 m) of the same film. The first generation takes about 44 ft (13.5 m) of cast film, less than the newer cars.

Questions about wrapping a Mitsubishi Toppo

How much vinyl does it take to wrap a Mitsubishi Toppo?

It takes about 46 ft (14 m) of 60-inch (1.52 m) cast film to wrap a third generation Mitsubishi Toppo. That figure is for the newest body, from 2008 to 2013. The first generation uses less film, and the second generation uses more because of its boxier shape.

Can I wrap only the hood or the roof of a Toppo?

Yes, you can wrap only the hood or the roof of a Toppo. A partial wrap also covers mirror caps, and a chrome delete covers window trim and badges. Paint protection film is clear film on the front end of the car. These smaller jobs use less film than a full wrap.

Is a Toppo hard to wrap?

A Toppo is not hard to wrap, but a few parts add work. On the first and third generations, the tailgate has the rear glass in it, so the film ends at the edge of the glass. The second generation has sliding side doors with tracks that stay bare. The first generation has a tall body, so the roof is wrapped from a platform.

How many generations of the Toppo does this page cover?

This page covers three generations of the Mitsubishi Toppo. The first generation ran from 1990 to 1998, the second from 1998 to 2004, and the third from 2008 to 2013. Each generation has a different body style and film estimate.