Wraps by car

Mitsubishi Tredia wrap

The Mitsubishi Tredia wrap page covers the single generation of this compact sedan produced from 1982 to 1990. A full wrap of the first-generation Tredia takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast vinyl film. Chrome or patterned film requires about 59 ft (18 m).

1generations14.5 mof film for a full wrap

Mitsubishi Tredia, first generation, factory photo
Mitsubishi Tredia, first generation. Factory color shown.

Mitsubishi Tredia wrap colors and ideas

  • Tredia black wrap
  • Tredia white wrap
  • Tredia gray wrap
  • Tredia silver wrap
  • Tredia red wrap
  • Tredia blue wrap
  • Tredia green wrap
  • Tredia yellow wrap
  • Tredia orange wrap
  • Tredia purple wrap
  • Tredia pink wrap
  • Tredia teal wrap
  • Tredia brown wrap
  • Tredia gold wrap
  • Tredia chrome wrap
  • Tredia color shift wrap
  • Tredia carbon fiber wrap
  • Tredia camo and patterned wrap

How much vinyl to wrap a Mitsubishi Tredia

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1982–1990sedan (4 doors)168.5 in (4,280 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Tredia wrap cost factors

Tredia wrap cost depends on film type, paint condition, and how much of the car is covered. A first-generation sedan from 1982 to 1990 may have original or repainted panels, and a test spot tells how the film adheres. More cut-outs or removed parts add labor. The size of the car, 168.5 in (4,280 mm) long, sets the film needed.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: sedan (4 doors).

Tredia wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsubishi Tredia, first generation, factory photo
Factory color shown

1982–1990 Tredia sedan (first generation)

1982–1990sedan (4 doors)168.5 in (4,280 mm)

The first-generation Mitsubishi Tredia, sold as a four-door sedan from 1982 to 1990, often has paint that is original or repainted. A test spot on a panel before a full wrap shows whether the film will adhere cleanly. Older paint can be more fragile when film is repositioned. Installers may adjust surface prep to the paint condition.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Tredia

Partial wrap options for the Mitsubishi Tredia include the roof, hood, and mirror caps in vinyl. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mitsubishi Tredia: body, cut-outs and film

A Mitsubishi Tredia vinyl wrap covers one body style: a four-door sedan measuring 168.5 in (4,280 mm) long. Sedan shapes keep the film panels manageable, as the roof and rear pillars follow straightforward lines. The compact size means fewer large, flat panels than on a full-size car. Installers still measure and trim each panel to the car.

Tredia wrap ideas start with the sedan's chrome trim around the windows and badges, which can be covered with black film for a chrome delete. The mirrors, door handles, and bumpers come off or are worked around for cleaner edges. Cut-outs are needed for the headlights, taillights, and door locks. The front grille and side moldings may be wrapped in place or removed.

To know how much vinyl to wrap a Tredia, the single generation from 1982 to 1990 makes film estimates straightforward. Some early cars may have different trim or side moldings, but panel sizes stay within the same range. A test spot on the paint is wise before ordering full film amounts.

Questions about wrapping a Mitsubishi Tredia

How much vinyl does it take to wrap a Mitsubishi Tredia?

It takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film to wrap a Mitsubishi Tredia fully. Chrome or patterned film adds up to about 59 ft (18 m) because of pattern matching and trim coverage.

Can I wrap only the hood or the roof of a Tredia?

Yes, you can wrap only the hood or the roof of a Tredia. Partial jobs on this car also include mirror caps, a chrome delete on window trim and badges, or clear paint protection film on the front end.

Is a Tredia hard to wrap?

A Tredia is not especially hard to wrap, but its age adds work. The compact sedan body, 168.5 in (4,280 mm) long, has straightforward panels, yet older paint may need extra care. Installers test a spot first and may remove trim for cleaner edges.

How many generations of the Tredia does this page cover?

This page covers one generation of the Mitsubishi Tredia. The first and only generation was produced from 1982 to 1990 as a four-door compact sedan.