Wraps by car

Peugeot 107 wrap

This page covers Peugeot 107 wrap work for the single generation produced from 2005 to 2015. A full vinyl wrap of the hatchback body takes roughly 46 ft (14 m) of 60-inch (1.52 m) cast film. The same car is also listed as the first generation, so all years share one body outline.

1generations14 mof film for a full wrap

Peugeot 107, first generation, factory photo
Peugeot 107, first generation. Factory color shown.

Peugeot 107 wrap colors and ideas

  • Peugeot 107 black wrap
  • Peugeot 107 white wrap
  • Peugeot 107 gray wrap
  • Peugeot 107 silver wrap
  • Peugeot 107 red wrap
  • Peugeot 107 blue wrap
  • Peugeot 107 green wrap
  • Peugeot 107 yellow wrap
  • Peugeot 107 orange wrap
  • Peugeot 107 purple wrap
  • Peugeot 107 pink wrap
  • Peugeot 107 teal wrap
  • Peugeot 107 brown wrap
  • Peugeot 107 gold wrap
  • Peugeot 107 chrome wrap
  • Peugeot 107 color shift wrap
  • Peugeot 107 carbon fiber wrap
  • Peugeot 107 camo and patterned wrap

How much vinyl to wrap a Peugeot 107

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2005–2015hatchback (3 or 5 doors)135.0 in (3,428 mm) to 135.0 in (3,430 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Peugeot 107 wrap cost factors

A Peugeot 107 wrap cost depends mainly on the area of the body and the film type, with a full wrap needing about 46 ft (14 m) of cast film. A chrome or patterned film pushes the estimate to roughly 54 ft (16.5 m) and may add labor for alignment. Door count also matters because three- and five-door versions change the cut lines and installation time. The car has only one body generation, so the cost stays consistent across all years, with only minor adjustment for fog lamp cut-outs on some trims.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: hatchback (3 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2009, 2012: bumpers and lights differ between the versions, and so do the film cuts.

Peugeot 107 wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot 107, first generation, factory photo
Factory color shown

2005–2015 Peugeot 107 hatchback (first generation)

2005–2015hatchback (3 or 5 doors)135.0 in (3,428 mm) to 135.0 in (3,430 mm)

The first generation Peugeot 107 ran from 2005 to 2015 and received restyling in 2009 and 2012. The bumpers and lights changed, so film cut for one version does not fit the other. The body dimensions stay within 135.0 in (3,428 mm) to 135.0 in (3,430 mm), but the front and rear shapes differ enough to require new templates.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Peugeot 107

A partial wrap on a Peugeot 107 can cover the roof, hood, and mirror caps as separate smaller jobs. A chrome delete covers the window trim and badges with black film, and the badges need careful cutting. Paint protection film (PPF) is often applied as a clear film on the front end to shield the bumper and hood. These jobs use less material than a full wrap, and the PPF can be cut to the same bumper shape as a color wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Peugeot 107: body, cut-outs and film

A Peugeot 107 vinyl wrap works with one compact hatchback body in three- and five-door styles. The car is 135.0 in (3,428 mm) long, which is a small footprint that keeps material use modest. The simple shape means the wrap can follow the panels without much stretching or waste.

For Peugeot 107 wrap ideas, plan around the tailgate that holds the rear glass, so the film ends at the edge of the glass. Some trims have fog lamps in the front bumper, and these need cut-outs in the bumper film. The three- and five-door versions change the door cut lines but not the overall material estimate.

If you are asking how much vinyl to wrap a Peugeot 107, the answer is about 46 ft (14 m) of 60-inch (1.52 m) cast film for a full color change. There is only one generation, so the outline stays the same from 2005 to 2015. If the design uses chrome or patterned film, order roughly 54 ft (16.5 m) because matching the pattern adds waste.

Questions about wrapping a Peugeot 107

How much vinyl does it take to wrap a Peugeot 107?

It takes about 46 ft (14 m) of 60-inch (1.52 m) cast film to wrap a Peugeot 107 completely. That figure fits the newest hatchback body and allows for the tailgate and the door areas. If you choose a pattern or chrome film, plan for roughly 54 ft (16.5 m) to keep the design aligned.

Which years of the Peugeot 107 take the same film cuts?

The Peugeot 107 was produced from 2005 to 2015 with the same base body, but the restyling in 2009 and 2012 changed the bumpers and lights. That means film cuts for the front and rear are the same only within the periods 2005–2008, 2009–2011, and 2012–2015. The hood, roof, and doors keep the same outline across all years.

Can I wrap only the hood or the roof of a Peugeot 107?

Yes, you can wrap only the hood or the roof of a Peugeot 107, and these are common partial wrap choices. The same installer can cover the mirror caps or do a chrome delete on the window trim and badges. Paint protection film (PPF) on the front end is another separate job that covers less than a full wrap.

Is a Peugeot 107 hard to wrap?

A Peugeot 107 is a small car, but it has a tailgate with the rear glass in it, so the film must end at the edge of the glass. Some trims have fog lamps in the front bumper, and these need cut-outs in the bumper film. The compact size of 135.0 in (3,428 mm) helps reduce labor, but the glass and fog lamps add careful trimming.