Wraps by car

Peugeot 208 wrap

This page covers the Peugeot 208 wrap for the two generations in the catalog. The first generation ran from 2010 to 2021, and the second generation has been built since 2019. A full vinyl wrap of the newest body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film.

2generations14.5 mof film for a full wrap

Peugeot 208, second generation, factory photo
Peugeot 208, second generation. Factory color shown.

Peugeot 208 wrap colors and ideas

  • Peugeot 208 black wrap
  • Peugeot 208 white wrap
  • Peugeot 208 gray wrap
  • Peugeot 208 silver wrap
  • Peugeot 208 red wrap
  • Peugeot 208 blue wrap
  • Peugeot 208 green wrap
  • Peugeot 208 yellow wrap
  • Peugeot 208 orange wrap
  • Peugeot 208 purple wrap
  • Peugeot 208 pink wrap
  • Peugeot 208 teal wrap
  • Peugeot 208 brown wrap
  • Peugeot 208 gold wrap
  • Peugeot 208 chrome wrap
  • Peugeot 208 color shift wrap
  • Peugeot 208 carbon fiber wrap
  • Peugeot 208 camo and patterned wrap

How much vinyl to wrap a Peugeot 208

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2019–nowhatchback (5 doors)155.0 in (3,937 mm) to 159.6 in (4,055 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)
2010–2021hatchback (3 or 5 doors)156.0 in (3,962 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Peugeot 208 wrap cost factors

The Peugeot 208 wrap cost depends on the generation, the film choice, and the amount of cut-out work. The second generation measures from 155.0 in to 159.6 in, while the first generation is 156.0 in. Cars with parking sensors, cameras, fog lamps, or a panoramic glass roof take more installer time.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.
  • Restyled in 2023: bumpers and lights differ between the versions, and so do the film cuts.

Peugeot 208 wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot 208, second generation, factory photo
Factory color shown

2019–now Peugeot 208 hatchback (second generation)

2019–nowhatchback (5 doors)155.0 in (3,937 mm) to 159.6 in (4,055 mm)

This second-generation Peugeot 208 was introduced in 2019 and restyled in 2023. Some trims have a panoramic glass roof, and the roof is not wrapped, so the roof stays dark whatever the color of the film. The film ends at the roof rails.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Peugeot 208, first generation, factory photo
Factory color shown

2010–2021 Peugeot 208 hatchback (first generation)

2010–2021hatchback (3 or 5 doors)156.0 in (3,962 mm)

This first-generation Peugeot 208 was introduced in 2010 and restyled in 2015. Paint age matters on a car of these years, because panels may be original or repainted. A test spot comes before a full wrap to check that the film will bond well.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Peugeot 208

A partial wrap on a Peugeot 208 can cover the hood, mirror caps, or roof on cars without the glass panel. A Peugeot 208 chrome delete covers window trim and badges with black film. Paint protection film (PPF) can be applied as clear film on the front end.

  • Partial wrap: hood, mirror caps, roof on cars without the glass panel.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Peugeot 208: body, cut-outs and film

The Peugeot 208 vinyl wrap follows the shape of a subcompact hatchback. Both generations were offered with five doors, and the first generation could also be had with three doors. The second generation measures from 155.0 in (3,937 mm) to 159.6 in (4,055 mm), while the first generation is 156.0 in (3,962 mm) long.

Peugeot 208 wrap ideas include cut-outs around every camera lens and every parking sensor in the bumpers. The tailgate has the rear glass in it, so the film ends at the edge of the glass. On some trims, fog lamps in the front bumper need cut-outs, and the plug-in and electric versions have a charge port door wrapped as a small piece of its own.

How much vinyl to wrap a Peugeot 208 depends on the generation and the film type. The first generation needs about 46 ft (14 m) of 60-inch (1.52 m) cast film, or about 57 ft (17.5 m) of chrome or patterned film. The second generation needs about 48 ft (14.5 m) of cast film, or about 59 ft (18 m) of chrome or patterned film.

Questions about wrapping a Peugeot 208

How much vinyl does it take to wrap a Peugeot 208?

A Peugeot 208 wrap takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film for the newest body. This figure comes from the second-generation hatchback that has been in production since 2019.

Can the roof of a Peugeot 208 be wrapped?

Yes, the roof of a Peugeot 208 can be wrapped when it is a painted steel roof. Some trims of the second generation have a panoramic glass roof, and glass is not wrapped.

Which years of the Peugeot 208 take the same film cuts?

The second-generation Peugeot 208 from 2019 to 2023 takes the same film cuts, and the restyled 2023 model takes the same cuts as well. The first-generation Peugeot 208 from 2010 to 2015 takes the same cuts, and the restyled 2015 to 2021 model takes the same cuts as the earlier first generation.

Can I wrap only the hood or the roof of a Peugeot 208?

Yes, you can wrap only the hood or the roof of a Peugeot 208. A partial wrap can cover the hood, mirror caps, or roof on cars without the glass panel.