Wraps by car

Peugeot 207 wrap

The Peugeot 207 wrap page covers the single generation of this subcompact produced from 2006 to 2015. The car was built as a convertible, hatchback, and wagon with two, three, or five doors. A full vinyl wrap needs about 43 ft (13 m) for the convertible and up to 57 ft (17.5 m) for the wagon. The estimate uses 60-inch (1.52 m) cast film, while chrome or patterned film can require up to about 66 ft (20 m).

1generations13 mof film for a full wrap

Peugeot 207, first generation, factory photo
Peugeot 207, first generation. Factory color shown.

Peugeot 207 wrap colors and ideas

  • Peugeot 207 black wrap
  • Peugeot 207 white wrap
  • Peugeot 207 gray wrap
  • Peugeot 207 silver wrap
  • Peugeot 207 red wrap
  • Peugeot 207 blue wrap
  • Peugeot 207 green wrap
  • Peugeot 207 yellow wrap
  • Peugeot 207 orange wrap
  • Peugeot 207 purple wrap
  • Peugeot 207 pink wrap
  • Peugeot 207 teal wrap
  • Peugeot 207 brown wrap
  • Peugeot 207 gold wrap
  • Peugeot 207 chrome wrap
  • Peugeot 207 color shift wrap
  • Peugeot 207 carbon fiber wrap
  • Peugeot 207 camo and patterned wrap

How much vinyl to wrap a Peugeot 207

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2015convertible, hatchback, wagon (2 or 3 or 5 doors)158.7 in (4,030 mm) to 163.9 in (4,164 mm)about 43 ft (13 m) for the convertible to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)

Peugeot 207 wrap cost factors

Peugeot 207 wrap cost depends on the body style, the film type, and the condition of the paint. The wagon needs the most material at up to 57 ft (17.5 m) of film, while the convertible needs the least at about 43 ft (13 m). Cut-outs for parking sensors or fog lamps add labor time, and chrome delete or patterned film increases the film used. The final cost also reflects how much disassembly the installer does, such as removing door handles.

  • Film for a full wrap: about 43 ft (13 m) for the convertible to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).
  • Body: convertible, hatchback, wagon (2 or 3 or 5 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2009: bumpers and lights differ between the versions, and so do the film cuts.

Peugeot 207 wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot 207, first generation, factory photo
Factory color shown

2006–2015 Peugeot 207 convertible, hatchback, wagon (first generation)

2006–2015convertible, hatchback, wagon (2 or 3 or 5 doors)158.7 in (4,030 mm) to 163.9 in (4,164 mm)

The open top of the Peugeot 207 convertible is handled in two ways in a wrap. A fabric top is not covered with film, so the film ends cleanly at the seam where the top meets the painted body. A folding hard top is wrapped as separate panels that move with the roof mechanism. The wrap installer masks the edges so the film does not interfere with the top's movement.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 43 ft (13 m) for the convertible to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Peugeot 207

A partial wrap on the Peugeot 207 covers the roof, hood, or mirror caps without changing the whole car. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs are available on any body style of the 207.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Peugeot 207: body, cut-outs and film

A Peugeot 207 vinyl wrap has different film needs because the car is 158.7 in (4,030 mm) to 163.9 in (4,164 mm) long. The convertible has a fabric top or a folding hard top, so the wrapped painted area is smaller than on the closed bodies. The wagon has the largest continuous side panels among the body styles and needs the most film. The hatchback sizes fall between those two body styles.

Peugeot 207 wrap ideas should account for cut-outs and parts that come off. The convertible fabric top is left unwrapped and the film ends where the top begins. A tailgate with the rear glass in it is wrapped only up to the edge of the glass. Some trims have parking sensors or fog lamps, so the installer cuts the bumper film around each sensor or lamp.

How much vinyl to wrap a Peugeot 207 depends on the body style and the film type. The first generation ran from 2006 to 2015 with a restyling in 2009, but the main dimensions did not change enough to alter the film estimate. The convertible takes the least film because the roof is not wrapped, while the wagon takes the most. Chrome or patterned film adds about 9 ft (2.5 m) to the material needed.

Questions about wrapping a Peugeot 207

How much vinyl does it take to wrap a Peugeot 207?

It takes about 43 ft (13 m) for the convertible and up to 57 ft (17.5 m) for the wagon to wrap a Peugeot 207. The estimate uses 60-inch (1.52 m) cast film. Chrome or patterned film can require up to about 66 ft (20 m).

Is the top of a Peugeot 207 wrapped?

Yes, only if the Peugeot 207 has a folding hard top. A fabric top is not wrapped because the film would not bond to the cloth. The film on a hard top is applied as panels that follow the roof sections.

Which years of the Peugeot 207 take the same film cuts?

The years 2006 to 2015 take the same film cuts for the Peugeot 207. The car was restyled in 2009, but the body shape and panel sizes stayed close enough that the same patterns still work.

Which Peugeot 207 body takes more film?

The wagon body takes more film for a Peugeot 207. It needs about 57 ft (17.5 m) of cast film, while the convertible needs about 43 ft (13 m) and the hatchback falls between those amounts.