Wraps by car

Peugeot 5008 wrap

This page covers the Peugeot 5008 wrap across three generations of the SUV and the vinyl wrap film each body needs. The current third generation, produced from 2024, is the longest body at 188.6 in (4,791 mm). A full wrap of the newest 5008 takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film.

3generations19.5 mof film for a full wrap

Peugeot 5008, third generation, factory photo
Peugeot 5008, third generation. Factory color shown.

Peugeot 5008 wrap colors and ideas

  • Peugeot 5008 black wrap
  • Peugeot 5008 white wrap
  • Peugeot 5008 gray wrap
  • Peugeot 5008 silver wrap
  • Peugeot 5008 red wrap
  • Peugeot 5008 blue wrap
  • Peugeot 5008 green wrap
  • Peugeot 5008 yellow wrap
  • Peugeot 5008 orange wrap
  • Peugeot 5008 purple wrap
  • Peugeot 5008 pink wrap
  • Peugeot 5008 teal wrap
  • Peugeot 5008 brown wrap
  • Peugeot 5008 gold wrap
  • Peugeot 5008 chrome wrap
  • Peugeot 5008 color shift wrap
  • Peugeot 5008 carbon fiber wrap
  • Peugeot 5008 camo and patterned wrap

How much vinyl to wrap a Peugeot 5008

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2024–nowSUV (5 doors)188.6 in (4,791 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)
2016–2024SUV (5 doors)182.7 in (4,641 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
2009–2016van (5 doors)178.3 in (4,529 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Peugeot 5008 wrap cost factors

The Peugeot 5008 wrap cost depends on the generation, the film type, and the amount of labor. The third generation needs about 64 ft (19.5 m) of film, but chrome or patterned film raises that to about 72 ft (22 m). The first generation has sliding door tracks that require more cutting time. Every trim with parking sensors or cameras adds extra cut-outs to the job.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has a rear spoiler: it is wrapped as a piece of its own.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Peugeot 5008 wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot 5008, third generation, factory photo
Factory color shown

2024–now Peugeot 5008 SUV (third generation)

2024–nowSUV (5 doors)188.6 in (4,791 mm)

The third generation of the Peugeot 5008, built from 2024, has a glass roof on some trims that is not wrapped. The roof stays dark whatever the color of the film because glass cannot be covered. The film ends at the roof rails, so the roof panel is left exposed. This is a key point for owners choosing a roof wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has a rear spoiler: it is wrapped as a piece of its own.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Peugeot 5008, second generation, factory photo
Factory color shown

2016–2024 Peugeot 5008 SUV (second generation)

2016–2024SUV (5 doors)182.7 in (4,641 mm)

The second generation of the Peugeot 5008 was restyled in 2020, changing the bumpers and lights. Film cut for one version does not fit the other because the shapes differ. An installer must know the production year of the car to order the correct pattern. This affects both full wraps and partial pieces like bumper covers.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Peugeot 5008, first generation, factory photo
Factory color shown

2009–2016 Peugeot 5008 van (first generation)

2009–2016van (5 doors)178.3 in (4,529 mm)

The first generation of the Peugeot 5008, made from 2009 to 2016, may have original or repainted panels. Paint age is a concern on a car of these years, so a test spot comes before a full wrap. The film may not adhere well to old or failing paint. Removing the film later could also pull up weak paint.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Peugeot 5008

A partial wrap on a Peugeot 5008 includes the hood, mirror caps, roof on cars without the glass panel, and rear spoiler. A Peugeot 5008 chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is applied as clear film on the front end to guard against stone chips. These smaller jobs use less film and take less time than a full wrap.

  • Partial wrap: hood, mirror caps, roof on cars without the glass panel, rear spoiler.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Peugeot 5008: body, cut-outs and film

The Peugeot 5008 vinyl wrap is shaped by the SUV body styles and their lengths. The third generation is the longest at 188.6 in (4,791 mm), while the first generation is the shortest at 178.3 in (4,529 mm). The first generation has sliding side doors that influence how film is cut. The second and third generations have conventional doors, which keeps film patterns simpler.

Peugeot 5008 wrap ideas start with the parts that need cut-outs or come off before the film is applied. Every generation has parking sensors in some trims, so the film is cut around each sensor. The second generation has fog lamps in every trim that require cut-outs in the bumper film. The third generation has a rear spoiler on every trim that is wrapped as a separate piece.

How much vinyl to wrap a Peugeot 5008 changes with the generation and body length. The third generation uses about 64 ft (19.5 m) of 60-inch film, while the second generation uses about 62 ft (19 m). The first generation, despite being shorter, uses about 66 ft (20 m) because of its sliding door tracks. Chrome or patterned film adds about 10 percent to each estimate.

Questions about wrapping a Peugeot 5008

How much vinyl does it take to wrap a Peugeot 5008?

A full wrap of the newest Peugeot 5008 takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. That figure covers the third generation body from 2024 onward. If you choose chrome or patterned film, the amount rises to about 72 ft (22 m).

Can the roof of a Peugeot 5008 be wrapped?

Yes, the roof of a Peugeot 5008 can be wrapped, unless the car has a panoramic glass roof. The glass panel itself is not wrapped, so the roof stays dark whatever the color of the film. On cars without the glass roof, the roof can be wrapped as a partial job.

Can I wrap only the hood or the roof of a Peugeot 5008?

Yes, you can wrap only the hood or the roof of a Peugeot 5008 as a partial wrap. The roof can be done on cars without the glass panel, and the hood is a common choice. Another partial option is the mirror caps or the rear spoiler.

Is a Peugeot 5008 hard to wrap?

A Peugeot 5008 is not especially hard to wrap, but some features add work. The first generation has sliding side door tracks that must be cut around. Every generation has parking sensors or cameras on some trims that need cut-outs. The third generation has a rear spoiler that is wrapped as a separate piece, which takes extra time.