Wraps by car

Peugeot 308 wrap

A Peugeot 308 wrap is a vinyl wrap applied to the Peugeot 308 compact car, covering three generations in this guide. The newest generation (2021 to now) comes as a hatchback or a wagon, and a full wrap takes about 51 ft (15.5 m) to 57 ft (17.5 m) of 60-inch (1.52 m) cast film.

3generations17.5 mof film for a full wrap

Peugeot 308, third generation, factory photo
Peugeot 308, third generation. Factory color shown.

Peugeot 308 wrap colors and ideas

  • Peugeot 308 black wrap
  • Peugeot 308 white wrap
  • Peugeot 308 gray wrap
  • Peugeot 308 silver wrap
  • Peugeot 308 red wrap
  • Peugeot 308 blue wrap
  • Peugeot 308 green wrap
  • Peugeot 308 yellow wrap
  • Peugeot 308 orange wrap
  • Peugeot 308 purple wrap
  • Peugeot 308 pink wrap
  • Peugeot 308 teal wrap
  • Peugeot 308 brown wrap
  • Peugeot 308 gold wrap
  • Peugeot 308 chrome wrap
  • Peugeot 308 color shift wrap
  • Peugeot 308 carbon fiber wrap
  • Peugeot 308 camo and patterned wrap

How much vinyl to wrap a Peugeot 308

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowhatchback, wagon (5 doors)171.7 in (4,360 mm) to 182.5 in (4,636 mm)about 51 ft (15.5 m) for the hatchback to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m)
2013–2021hatchback, wagon (5 doors)167.4 in (4,253 mm) to 180.5 in (4,585 mm)about 49 ft (15 m) for the hatchback to 56 ft (17 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m)
2007–2015convertible, hatchback, wagon (2 or 3 or 5 doors)168.3 in (4,275 mm) to 177.2 in (4,500 mm)about 48 ft (14.5 m) for the convertible to 62 ft (19 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m)

Peugeot 308 wrap cost factors

Peugeot 308 wrap cost depends on the car's generation, body style, and trim features rather than a fixed amount. A wagon needs more film than a hatchback, and a convertible or styling kit adds separate pieces that increase labor. The film type itself, such as chrome or patterned film, can require up to about 72 ft (22 m) on the newest models.

  • Film for a full wrap: about 51 ft (15.5 m) for the hatchback to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m).
  • Body: hatchback, wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.
  • Restyled in 2025: bumpers and lights differ between the versions, and so do the film cuts.

Peugeot 308 wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot 308, third generation, factory photo
Factory color shown

2021–now Peugeot 308 hatchback, wagon (third generation)

2021–nowhatchback, wagon (5 doors)171.7 in (4,360 mm) to 182.5 in (4,636 mm)

The restyling in 2025 changed the bumpers and lights of the third-generation Peugeot 308, so film cut for one version does not fit the other. A wrap for a 2021 to 2024 car cannot be reused on a 2025 model without new patterns. This affects both the hatchback and the wagon, since both received the updated front and rear ends.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 51 ft (15.5 m) for the hatchback to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m).

Peugeot 308, second generation, factory photo
Factory color shown

2013–2021 Peugeot 308 hatchback, wagon (second generation)

2013–2021hatchback, wagon (5 doors)167.4 in (4,253 mm) to 180.5 in (4,585 mm)

The glass roof on some second-generation Peugeot 308 trims is not wrapped, so the roof stays dark whatever the color of the film. This design means the panoramic glass roof remains uncovered, and the film ends at the roof rails. Owners choosing a full wrap should expect the roof to contrast with the wrapped body panels.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 49 ft (15 m) for the hatchback to 56 ft (17 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).

Peugeot 308, first generation, factory photo
Factory color shown

2007–2015 Peugeot 308 convertible, hatchback, wagon (first generation)

2007–2015convertible, hatchback, wagon (2 or 3 or 5 doors)168.3 in (4,275 mm) to 177.2 in (4,500 mm)

Paint age on a first-generation Peugeot 308 (2007 to 2015) means panels may be original or repainted, and a test spot comes before a full wrap. A test spot checks adhesion on older paint, because aging clear coat or repairs can affect how vinyl sticks. This step is worth doing on any car of these years before committing to a full wrap.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 48 ft (14.5 m) for the convertible to 62 ft (19 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Peugeot 308

For a partial wrap on a Peugeot 308 you can wrap the roof, hood, and mirror caps, leaving the rest of the body untouched. A chrome delete covers window trim and badges with black film, often paired with a partial wrap. Paint protection film (PPF) is clear film applied to the front end to protect it from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Peugeot 308: body, cut-outs and film

A Peugeot 308 vinyl wrap must account for the car's hatchback and wagon body styles, with lengths from 167.4 in (4,253 mm) to 182.5 in (4,636 mm) across generations. These body lengths mean a full wrap uses between 48 ft (14.5 m) and 62 ft (19 m) of 60-inch film. The tailgate includes the rear glass, so the film ends at the edge of the glass rather than covering it.

Peugeot 308 wrap ideas often start with handling the tailgate, where film ends at the edge of the rear glass. On some trims a panoramic glass roof is not wrapped, and the film stops at the roof rails. Parking sensors, cameras, and fog lamps need cut-outs in the film, while a styling kit adds more separate pieces to cover.

How much vinyl to wrap a Peugeot 308 depends on the generation, because body styles and lengths changed over time. First-generation cars from 2007 to 2015 include a convertible, which takes about 48 ft (14.5 m), while the wagon needs up to 62 ft (19 m). The second and third generations have hatchbacks and wagons only, with estimates from 49 ft (15 m) to 57 ft (17.5 m).

Questions about wrapping a Peugeot 308

How much vinyl does it take to wrap a Peugeot 308?

About 51 ft (15.5 m) to 57 ft (17.5 m) of 60-inch (1.52 m) cast vinyl is needed to wrap a Peugeot 308. The lower figure suits the current hatchback, and the higher figure covers the wagon. Chrome or patterned film may require up to about 72 ft (22 m) for the newest body.

Which years of the Peugeot 308 take the same film cuts?

Peugeot 308 production years fall into three groups that share film cuts: 2007 to 2015, 2013 to 2021, and 2021 onward. Within each group, a restyling changed body details: the first generation was restyled in 2011, the second in 2017, and the third in 2025. Film cut for a pre-restyling car does not fit the restyled version.

Which Peugeot 308 body takes more film?

The wagon body takes more film than the hatchback or convertible across all Peugeot 308 generations. In the newest generation, the wagon needs about 57 ft (17.5 m), while the hatchback takes about 51 ft (15.5 m). The first-generation wagon is the largest, taking up to 62 ft (19 m) of film.

Can I wrap only the hood or the roof of a Peugeot 308?

Yes, you can wrap only the hood or the roof of a Peugeot 308 as a partial wrap. Other small jobs include mirror caps, a chrome delete on window trim and badges, or clear paint protection film on the front end. These options use less film than a full wrap and can be done individually.