Wraps by car

Peugeot 607 wrap

A Peugeot 607 wrap covers the one-generation luxury sedan produced from 1999 to 2010. A full vinyl wrap of the newest body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. This page covers the body, the cut-outs, the film amounts and the wrap options for this car.

1generations18.5 mof film for a full wrap

Peugeot 607, first generation, factory photo
Peugeot 607, first generation. Factory color shown.

Peugeot 607 wrap colors and ideas

  • Peugeot 607 black wrap
  • Peugeot 607 white wrap
  • Peugeot 607 gray wrap
  • Peugeot 607 silver wrap
  • Peugeot 607 red wrap
  • Peugeot 607 blue wrap
  • Peugeot 607 green wrap
  • Peugeot 607 yellow wrap
  • Peugeot 607 orange wrap
  • Peugeot 607 purple wrap
  • Peugeot 607 pink wrap
  • Peugeot 607 teal wrap
  • Peugeot 607 brown wrap
  • Peugeot 607 gold wrap
  • Peugeot 607 chrome wrap
  • Peugeot 607 color shift wrap
  • Peugeot 607 carbon fiber wrap
  • Peugeot 607 camo and patterned wrap

How much vinyl to wrap a Peugeot 607

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1999–2010sedan (4 doors)191.8 in (4,871 mm) to 193.0 in (4,902 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Peugeot 607 wrap cost factors

The Peugeot 607 wrap cost depends mainly on the chosen film type and the condition of the paint. A full wrap of the 191.8 in (4,871 mm) to 193.0 in (4,902 mm) sedan takes about 61 ft (18.5 m) of cast film, and a chrome or patterned finish pushes that to about 69 ft (21 m). Pre-cut kits for the 1999–2004 or 2004–2010 bumpers are less common, so most shops measure and cut on the car, which adds labor time.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: sedan (4 doors).
  • Restyled in 2004: bumpers and lights differ between the versions, and so do the film cuts.

Peugeot 607 wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot 607, first generation, factory photo
Factory color shown

1999–2010 Peugeot 607 sedan (first generation)

1999–2010sedan (4 doors)191.8 in (4,871 mm) to 193.0 in (4,902 mm)

The first generation Peugeot 607 was built from 1999 to 2010 and restyled in 2004, which matters to anyone fitting pre-cut film. The 2004 restyling changed the bumpers and lights, so film cut for one version does not fit the other. The car remained a four-door luxury sedan throughout, with the same basic roof and door shapes.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Peugeot 607

A partial wrap on a Peugeot 607 often starts with the roof, hood or mirror caps, which changes the look with less film than a full color change. A Peugeot 607 chrome delete covers the window trim and badges with black film, and it suits the brightwork of this luxury sedan. Clear paint protection film (PPF) on the front end shields the bumper, hood and mirrors without hiding the paint color.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Peugeot 607: body, cut-outs and film

The Peugeot 607 vinyl wrap is sized for a long four-door sedan, which makes panel layout more involved than on a compact car. The body measures 191.8 in (4,871 mm) to 193.0 in (4,902 mm) depending on version, and the roof is wide enough to need a second pair of hands. The doors are tall, so each side takes a full sheet of film with little waste left over.

Peugeot 607 wrap ideas start with the bright trim, because the window surrounds and badges are chrome and can be covered with black film as a chrome delete. The door handles, antenna base and front bumper grille surround need cut-outs or removal for a clean install. The mirrors come off easily, and taking them off avoids a seam on the cap.

To work out how much vinyl to wrap a Peugeot 607, the key fact is that only one generation was sold, from 1999 to 2010. A restyling in 2004 changed the bumpers and lights, so film pre-cut for one version does not fit the other. For a full color change, the newer body needs about 61 ft (18.5 m) of 60-inch (1.52 m) cast film, while chrome or patterned film calls for about 69 ft (21 m).

Questions about wrapping a Peugeot 607

How much vinyl does it take to wrap a Peugeot 607?

A Peugeot 607 needs about 61 ft (18.5 m) of 60-inch (1.52 m) cast film for a full wrap of the newest body. If you choose a chrome or patterned film, plan for about 69 ft (21 m) to match patterns across panels.

Which years of the Peugeot 607 take the same film cuts?

The Peugeot 607 was built from 1999 to 2010, but the same film cuts only apply within each sub-period: 1999–2004 and 2004–2010. The 2004 restyling changed the bumpers and lights, so front and rear templates are not interchangeable across that year.

Can I wrap only the hood or the roof of a Peugeot 607?

Yes, you can wrap only the hood or the roof of a Peugeot 607. A partial wrap on the roof, hood or mirror caps is a standard job, and a Peugeot 607 chrome delete can cover just the window trim and badges.

Is a Peugeot 607 hard to wrap?

A Peugeot 607 is not the hardest car to wrap, but its length and the 2004 restyling add work. The body is 191.8 in (4,871 mm) to 193.0 in (4,902 mm) long, so you handle large panels that need two people. The chrome window trim and badges should be removed or masked for a clean chrome delete, and the antenna base needs a cut-out.