Wraps by car

Peugeot 108 wrap

This page covers the Peugeot 108 wrap, a vinyl wrap for the mini hatchback made from 2014 to now in one generation. A full wrap of the newest body takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. With chrome or patterned film the amount rises to about 51 ft (15.5 m).

1generations12.5 mof film for a full wrap

Peugeot 108, first generation, factory photo
Peugeot 108, first generation. Factory color shown.

Peugeot 108 wrap colors and ideas

  • Peugeot 108 black wrap
  • Peugeot 108 white wrap
  • Peugeot 108 gray wrap
  • Peugeot 108 silver wrap
  • Peugeot 108 red wrap
  • Peugeot 108 blue wrap
  • Peugeot 108 green wrap
  • Peugeot 108 yellow wrap
  • Peugeot 108 orange wrap
  • Peugeot 108 purple wrap
  • Peugeot 108 pink wrap
  • Peugeot 108 teal wrap
  • Peugeot 108 brown wrap
  • Peugeot 108 gold wrap
  • Peugeot 108 chrome wrap
  • Peugeot 108 color shift wrap
  • Peugeot 108 carbon fiber wrap
  • Peugeot 108 camo and patterned wrap

How much vinyl to wrap a Peugeot 108

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–nowhatchback (3 or 5 doors)136.8 in (3,475 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)

Peugeot 108 wrap cost factors

Peugeot 108 wrap cost depends on the film used, the number of panels wrapped, and the work in cut-outs and trim. The car is 136.8 in (3,475 mm) long, so film use is low but the tailgate, sunroof and fog lamp areas add detail time. A full wrap takes about 41 ft (12.5 m) of cast film, while chrome or patterned film needs about 51 ft (15.5 m).

  • Film for a full wrap: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).
  • Body: hatchback (3 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have a two-tone body from the factory: the roof is a second color, and the wrap either keeps that split or covers it.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Peugeot 108 wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot 108, first generation, factory photo
Factory color shown

2014–now Peugeot 108 hatchback (first generation)

2014–nowhatchback (3 or 5 doors)136.8 in (3,475 mm)

The first generation Peugeot 108, sold from 2014 to now, often has a two-tone body from the factory with the roof in a second color. You can keep that second color and wrap only the lower panels, or cover the whole body for one new color. The wrap either keeps that split or covers it, and the choice changes how the film is planned.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have a two-tone body from the factory: the roof is a second color, and the wrap either keeps that split or covers it.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on a Peugeot 108

A partial wrap on the Peugeot 108 covers the roof, hood, or mirror caps, which are small and quick to film. A Peugeot 108 chrome delete covers the window trim and badges with black film. Paint protection film goes on the front end as a clear film to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Peugeot 108: body, cut-outs and film

The Peugeot 108 vinyl wrap suits a small hatchback body available with 3 or 5 doors and a length of 136.8 in (3,475 mm). The compact size keeps film use low and makes each panel easy to reach. The roof is short, so a roof wrap uses less material than on larger cars.

Peugeot 108 wrap ideas start with the tailgate, which holds the rear glass and needs the film to end at the edge of the glass. Some trims have a sunroof, so the roof film must be cut around its opening. Every trim has fog lamps in the front bumper, and those need cut-outs in the bumper film.

To know how much vinyl to wrap a Peugeot 108 you only need to plan for one generation, produced from 2014 to now. The body style stays the same, with 3 or 5 doors a constant in the catalog. The film estimate stays about 41 ft (12.5 m) of cast film across the generation.

Questions about wrapping a Peugeot 108

How much vinyl does it take to wrap a Peugeot 108?

It takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film to wrap a Peugeot 108. Chrome or patterned film needs more, about 51 ft (15.5 m), because the pattern must be matched. The small hatchback body keeps the amount low.

Can the roof of a Peugeot 108 be wrapped?

Yes, the roof of a Peugeot 108 can be wrapped as a single panel. The car is 136.8 in (3,475 mm) long, so the roof is short and uses little film. Some trims have a sunroof, and the film is cut around its opening.

Can I wrap only the hood or the roof of a Peugeot 108?

Yes, you can wrap only the hood or the roof of a Peugeot 108 as a partial wrap. The roof, hood, and mirror caps are common partial wrap areas on this car. A chrome delete on the window trim and badges is another smaller job.

Is a Peugeot 108 hard to wrap?

A Peugeot 108 is not hard to wrap, but a few details add work. The tailgate glass sits in the film area, so the film ends at the edge of the glass. Some trims have a sunroof or a two-tone body, and every trim has fog lamps that need cut-outs in the bumper film.