Wraps by car

Peugeot RCZ wrap

This page covers the Peugeot RCZ wrap, a compact coupe produced in one generation from 2010 to 2015. A full vinyl wrap of the newest body takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 59 ft (18 m) of the same width.

1generations14 mof film for a full wrap

Peugeot RCZ, first generation, factory photo
Peugeot RCZ, first generation. Factory color shown.

Peugeot RCZ wrap colors and ideas

  • Peugeot RCZ black wrap
  • Peugeot RCZ white wrap
  • Peugeot RCZ gray wrap
  • Peugeot RCZ silver wrap
  • Peugeot RCZ red wrap
  • Peugeot RCZ blue wrap
  • Peugeot RCZ green wrap
  • Peugeot RCZ yellow wrap
  • Peugeot RCZ orange wrap
  • Peugeot RCZ purple wrap
  • Peugeot RCZ pink wrap
  • Peugeot RCZ teal wrap
  • Peugeot RCZ brown wrap
  • Peugeot RCZ gold wrap
  • Peugeot RCZ chrome wrap
  • Peugeot RCZ color shift wrap
  • Peugeot RCZ carbon fiber wrap
  • Peugeot RCZ camo and patterned wrap

How much vinyl to wrap a Peugeot RCZ

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2010–2015coupe (2 doors)168.8 in (4,287 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Peugeot RCZ wrap cost factors

The Peugeot RCZ wrap cost depends on the film area and the work in cutting around sensors or fog lamps on some trims. The car takes about 46 ft (14 m) of 60-inch (1.52 m) cast film, or about 59 ft (18 m) if you pick chrome or patterned film. A wrap on a restyled car needs film cut for its version, which adds time for the installer.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2013: bumpers and lights differ between the versions, and so do the film cuts.

Peugeot RCZ wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot RCZ, first generation, factory photo
Factory color shown

2010–2015 Peugeot RCZ coupe (first generation)

2010–2015coupe (2 doors)168.8 in (4,287 mm)

The first generation Peugeot RCZ was built from 2010 to 2015 as a coupe with two doors. A restyling in 2013 changed the bumpers and lights, so film cut for one version does not fit the other. Plan your wrap with the year of the car in mind.

Two long side doors: each door is one large piece of film.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Peugeot RCZ

A partial wrap on a Peugeot RCZ can cover the roof, hood, or mirror caps as a smaller job. A chrome delete covers the window trim and badges with black film for a darker look. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Peugeot RCZ: body, cut-outs and film

The Peugeot RCZ vinyl wrap centers on a two-door coupe body that is 168.8 in (4,287 mm) long. The two long side doors each require one large piece of film, which demands careful handling to avoid wrinkles. The compact size of this coupe means a full wrap uses less film than a larger car.

Peugeot RCZ wrap ideas include planning for cut-outs around parking sensors in the bumpers on some trims. Some trims also have fog lamps in the front bumper, so the bumper film needs precise cut-outs around each lamp. Taking off small parts like mirror caps can make the installation cleaner and reduce visible edges.

How much vinyl to wrap a Peugeot RCZ depends on the version, because the car got a restyling in 2013 with new bumpers and lights. Film cut for a 2010 to 2013 car does not fit a 2013 to 2015 car, and the other way around. You count film from the full wrap estimate of about 46 ft (14 m) for the newest body.

Questions about wrapping a Peugeot RCZ

How much vinyl does it take to wrap a Peugeot RCZ?

A Peugeot RCZ takes about 46 ft (14 m) of 60-inch (1.52 m) cast film for a full wrap. If you use chrome or patterned film, plan for about 59 ft (18 m) of the same width. This estimate is for the newest body of the car.

Which years of the Peugeot RCZ take the same film cuts?

The Peugeot RCZ was made from 2010 to 2015, and the same film cuts fit within two groups: 2010 to 2013 and 2013 to 2015. The restyling in 2013 changed the bumpers and lights, so each group needs its own film pattern.

Can I wrap only the hood or the roof of a Peugeot RCZ?

Yes, you can wrap only the hood or the roof of a Peugeot RCZ. A partial wrap can cover the roof, hood, or mirror caps. For a darker look, a chrome delete covers the window trim and badges with black film.

Is a Peugeot RCZ hard to wrap?

A Peugeot RCZ is not the easiest car to wrap, mainly because the two long side doors each need one large piece of film. Some trims have parking sensors in the bumpers and fog lamps in the front bumper, so the film has to be cut around each one. The compact size helps, but the cut-outs and large panels add work.