Wraps by car

Peugeot 4007 wrap

A Peugeot 4007 wrap covers this single-generation SUV with one vinyl wrap design. The car was built from 2007 to 2014. A full wrap of the body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film.

1generations18.5 mof film for a full wrap

Peugeot 4007, first generation, factory photo
Peugeot 4007, first generation. Factory color shown.

Peugeot 4007 wrap colors and ideas

  • Peugeot 4007 black wrap
  • Peugeot 4007 white wrap
  • Peugeot 4007 gray wrap
  • Peugeot 4007 silver wrap
  • Peugeot 4007 red wrap
  • Peugeot 4007 blue wrap
  • Peugeot 4007 green wrap
  • Peugeot 4007 yellow wrap
  • Peugeot 4007 orange wrap
  • Peugeot 4007 purple wrap
  • Peugeot 4007 pink wrap
  • Peugeot 4007 teal wrap
  • Peugeot 4007 brown wrap
  • Peugeot 4007 gold wrap
  • Peugeot 4007 chrome wrap
  • Peugeot 4007 color shift wrap
  • Peugeot 4007 carbon fiber wrap
  • Peugeot 4007 camo and patterned wrap

How much vinyl to wrap a Peugeot 4007

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2007–2014SUV (5 doors)182.7 in (4,640 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Peugeot 4007 wrap cost factors

A Peugeot 4007 wrap cost depends on the film type, the areas covered, and the labor for this exact SUV. The full body needs about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. A chrome or patterned film needs about 69 ft (21 m). The tall roof, large tailgate, and bumper cut-outs all add install time.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Peugeot 4007 wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot 4007, first generation, factory photo
Factory color shown

2007–2014 Peugeot 4007 SUV (first generation)

2007–2014SUV (5 doors)182.7 in (4,640 mm)

The first generation Peugeot 4007 has roof rails on some trims. They come off before the roof is wrapped, or the film is cut along them. Removing the rails gives a cleaner edge under the film. Cutting along them leaves the rails in place but needs careful trimming.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Peugeot 4007

A Peugeot 4007 chrome delete covers the window trim and badges in black film. A partial wrap can include the roof, hood, and mirror caps. Paint protection film (PPF) is clear film applied to the front end. These smaller jobs protect or restyle specific areas without a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Peugeot 4007: body, cut-outs and film

A Peugeot 4007 vinyl wrap has to fit a large five-door SUV body. The car is 182.7 in (4,640 mm) long. The tall roof and long sides add surface area. Wrapping this shape uses more film than a small hatchback.

Peugeot 4007 wrap ideas start with the tailgate, where the film ends at the edge of the rear glass. Some trims have roof rails that come off before the roof is wrapped, or the film is cut along them. Parking sensors in some bumpers need the film cut around each sensor. Every trim has fog lamps in the front bumper, so cut-outs are needed in the bumper film.

How much vinyl to wrap a Peugeot 4007 depends on the film you choose. A full wrap in standard cast film needs about 61 ft (18.5 m) of 60-inch (1.52 m) material. Chrome or patterned film costs more to cover the same body. Plan for about 69 ft (21 m) of 60-inch (1.52 m) film if you pick a chrome or patterned finish.

Questions about wrapping a Peugeot 4007

How much vinyl does it take to wrap a Peugeot 4007?

It takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film to wrap a Peugeot 4007. That figure covers the standard body with a single-color film. For chrome or patterned film, plan on about 69 ft (21 m) of 60-inch (1.52 m) material.

Can I wrap only the hood or the roof of a Peugeot 4007?

Yes, you can wrap only the hood or the roof of a Peugeot 4007. A partial wrap can cover just the roof, hood, and mirror caps. The hood is a single large panel with no cut-outs. The roof may need the rails removed or cut around if your car has them.

Is a Peugeot 4007 hard to wrap?

A Peugeot 4007 is not the easiest car to wrap because of its size and details. The body is 182.7 in (4,640 mm) long, so you are working with large panels. The tailgate has the rear glass in it, so the film must end at the edge of the glass. Parking sensors and fog lamps in the bumpers need careful cut-outs.

How many generations of the Peugeot 4007 does this page cover?

This page covers one generation of the Peugeot 4007. The car was produced from 2007 to 2014 without a major body change.