Wraps by car

Peugeot 301 wrap

A Peugeot 301 wrap covers the full sedan body of the first generation, produced since 2012. The car is a subcompact four-door sedan with a length around 175 inches. A full vinyl wrap of the newest body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film.

1generations16.5 mof film for a full wrap

Peugeot 301, first generation, factory photo
Peugeot 301, first generation. Factory color shown.

Peugeot 301 wrap colors and ideas

  • Peugeot 301 black wrap
  • Peugeot 301 white wrap
  • Peugeot 301 gray wrap
  • Peugeot 301 silver wrap
  • Peugeot 301 red wrap
  • Peugeot 301 blue wrap
  • Peugeot 301 green wrap
  • Peugeot 301 yellow wrap
  • Peugeot 301 orange wrap
  • Peugeot 301 purple wrap
  • Peugeot 301 pink wrap
  • Peugeot 301 teal wrap
  • Peugeot 301 brown wrap
  • Peugeot 301 gold wrap
  • Peugeot 301 chrome wrap
  • Peugeot 301 color shift wrap
  • Peugeot 301 carbon fiber wrap
  • Peugeot 301 camo and patterned wrap

How much vinyl to wrap a Peugeot 301

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–nowsedan (4 doors)174.9 in (4,442 mm) to 175.0 in (4,445 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Peugeot 301 wrap cost factors

Peugeot 301 wrap cost depends on film type, the amount of disassembly and the installer's labour. A chrome or patterned film uses about 64 ft (19.5 m), which is more than a standard cast film at about 54 ft (16.5 m). The restyling years mean a shop must have the right bumper patterns for the version being wrapped. Cut-outs for fog lamps on some trims add a little time to the job.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2017: bumpers and lights differ between the versions, and so do the film cuts.

Peugeot 301 wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot 301, first generation, factory photo
Factory color shown

2012–now Peugeot 301 sedan (first generation)

2012–nowsedan (4 doors)174.9 in (4,442 mm) to 175.0 in (4,445 mm)

The first generation Peugeot 301 was restyled in 2017 with new bumpers and lights. Film cut for a pre-restyling front bumper does not fit the later version. A wrapper needs to know the production year to pick the correct template for the front end. The rest of the body panels are the same for both versions.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Peugeot 301

A partial wrap on a Peugeot 301 can cover the roof, hood or mirror caps alone. Chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end. These smaller jobs use less film than a full wrap and can be done without removing the door handles.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Peugeot 301: body, cut-outs and film

The Peugeot 301 vinyl wrap uses a moderate amount of film because the car has one body style: a four-door sedan. Its length from 174.9 in (4,442 mm) to 175.0 in (4,445 mm) creates a roof, hood and trunk area that are manageable for a single installer. The sedan shape keeps the wrap area predictable, with no large rear hatch or complex tailgate. This body style means the film estimate for a full wrap stays close to the listed figure.

Peugeot 301 wrap ideas can include leaving the fog lamps visible on trims that have them. On those trims, the front bumper film needs cut-outs for the fog lamp openings. The door handles and mirrors are usually removed for a clean wrap. The badges and lettering come off for a smooth finish and are reinstalled after the film is applied.

If you count how much vinyl to wrap a Peugeot 301, the figure stays the same across all years of this generation. The first generation runs from 2012 to now, with a restyling in 2017 that changed bumpers and lights. That change does not alter the total area of the body panels. A full wrap of any year still uses about 54 ft (16.5 m) of film.

Questions about wrapping a Peugeot 301

How much vinyl does it take to wrap a Peugeot 301?

A full wrap of a Peugeot 301 takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. That figure is for the newest body of the first generation. Chrome or patterned film needs more, about 64 ft (19.5 m).

Which years of the Peugeot 301 take the same film cuts?

The Peugeot 301 has one generation with a restyling in 2017. Film cuts for the front bumpers and lights differ between pre-2017 and post-2017 versions. The rest of the body panels are the same from 2012 to now.

Can I wrap only the hood or the roof of a Peugeot 301?

Yes, you can wrap only the hood or the roof of a Peugeot 301. A partial wrap on this car can also cover the mirror caps. Chrome delete and paint protection film are other smaller jobs.

Is a Peugeot 301 hard to wrap?

A Peugeot 301 is not hard to wrap, but the fog lamps on some trims add work. On those trims, the front bumper film needs cut-outs for the fog lamp openings. The car's length of about 175 inches means a standard amount of film for a sedan.