Wraps by car

Peugeot 2008 wrap

This page covers vinyl wrap for the Peugeot 2008 across its two generations. The second-generation body was produced from 2019 and the first-generation from 2013 to 2021. A full wrap of the newest body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film.

2generations17 mof film for a full wrap

Peugeot 2008, second generation, factory photo
Peugeot 2008, second generation. Factory color shown.

Peugeot 2008 wrap colors and ideas

  • Peugeot 2008 black wrap
  • Peugeot 2008 white wrap
  • Peugeot 2008 gray wrap
  • Peugeot 2008 silver wrap
  • Peugeot 2008 red wrap
  • Peugeot 2008 blue wrap
  • Peugeot 2008 green wrap
  • Peugeot 2008 yellow wrap
  • Peugeot 2008 orange wrap
  • Peugeot 2008 purple wrap
  • Peugeot 2008 pink wrap
  • Peugeot 2008 teal wrap
  • Peugeot 2008 brown wrap
  • Peugeot 2008 gold wrap
  • Peugeot 2008 chrome wrap
  • Peugeot 2008 color shift wrap
  • Peugeot 2008 carbon fiber wrap
  • Peugeot 2008 camo and patterned wrap

How much vinyl to wrap a Peugeot 2008

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2019–nowSUV (5 doors)169.3 in (4,300 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
2013–2021wagon (5 doors)163.7 in (4,159 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Peugeot 2008 wrap cost factors

The Peugeot 2008 wrap cost depends on the body size, film amount, and trim features. The second generation is 169.3 in (4,300 mm) long and uses about 56 ft (17 m) of film. The first generation is 163.7 in (4,159 mm) and uses about 57 ft (17.5 m) of film. Extra pieces like the panoramic roof or styling kit add labor time.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have a two-tone body from the factory: the roof is a second color, and the wrap either keeps that split or covers it.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have a rear spoiler: it is wrapped as a piece of its own.
  • Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.
  • Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.
  • Restyled in 2023: bumpers and lights differ between the versions, and so do the film cuts.

Peugeot 2008 wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot 2008, second generation, factory photo
Factory color shown

2019–now Peugeot 2008 SUV (second generation)

2019–nowSUV (5 doors)169.3 in (4,300 mm)

The second-generation Peugeot 2008 has a glass roof on some trims. The glass roof is not wrapped, so the roof stays dark whatever the color of the film. The film ends at the roof rails on those trims.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have a two-tone body from the factory: the roof is a second color, and the wrap either keeps that split or covers it.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have a rear spoiler: it is wrapped as a piece of its own.

Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Peugeot 2008, first generation, factory photo
Factory color shown

2013–2021 Peugeot 2008 wagon (first generation)

2013–2021wagon (5 doors)163.7 in (4,159 mm)

The first-generation Peugeot 2008 covers production years 2013 to 2021. Its years overlap with the newer body from 2019 to 2021, so the owner of a car from those years checks which body it is. The first generation was restyled in 2016.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Peugeot 2008

A partial wrap on the Peugeot 2008 includes the hood, mirror caps, roof on cars without the glass panel, and rear spoiler. A Peugeot 2008 chrome delete covers the window trim, decorative moldings, and badges with black film. Paint protection film (PPF) is a clear film applied to the front end.

  • Partial wrap: hood, mirror caps, roof on cars without the glass panel, rear spoiler.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Peugeot 2008: body, cut-outs and film

The Peugeot 2008 vinyl wrap depends on its two SUV body styles. The second generation is a 5-door SUV measuring 169.3 in (4,300 mm) long, while the first generation is a 5-door wagon measuring 163.7 in (4,159 mm). These sizes mean a full wrap uses about 56–57 ft (17–17.5 m) of film.

Peugeot 2008 wrap ideas start with the tailgate, rear glass, and optional roof features. The tailgate includes the rear glass, so the film ends at the glass edge. Some trims have a panoramic glass roof, sunroof, or roof rails that require cut-outs or removal.

To know how much vinyl to wrap a Peugeot 2008, compare the two generations. The second generation (2019–now) is longer than the first (2013–2021) by about 5.6 in (141 mm). Both generations need roughly the same amount of film, about 56–57 ft (17–17.5 m).

Questions about wrapping a Peugeot 2008

How much vinyl does it take to wrap a Peugeot 2008?

It takes about 56 ft (17 m) of 60-inch (1.52 m) cast film to wrap a Peugeot 2008. For chrome or patterned film you need about 66 ft (20 m). This estimate is for the second-generation body from 2019 onward.

Can the roof of a Peugeot 2008 be wrapped?

Yes, the roof of a Peugeot 2008 can be wrapped unless it has a full panoramic glass roof. If the car has a sunroof, the roof film is cut around its opening. On cars with roof rails, the rails come off before wrapping or the film is cut along them.

Which years of the Peugeot 2008 take the same film cuts?

The same film cuts apply within each generation, before and after its restyling. The second generation has been produced since 2019, with a restyling in 2023. The first generation ran from 2013 to 2021, with a restyling in 2016.

Can I wrap only the hood or the roof of a Peugeot 2008?

Yes, you can wrap only the hood or the roof of a Peugeot 2008. A partial wrap includes the hood, mirror caps, roof on cars without the glass panel, and rear spoiler. Other options include chrome delete and paint protection film on the front end.