Wraps by car

Peugeot 208 GTi wrap

The Peugeot 208 GTi wrap page covers the first generation hatchback built from 2013 to 2019. A full vinyl wrap of a three-door body takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 57 ft (17.5 m) because of extra matching and waste.

1generations14 mof film for a full wrap

Peugeot 208 GTi, first generation, factory photo
Peugeot 208 GTi, first generation. Factory color shown.

Peugeot 208 GTi wrap colors and ideas

  • Peugeot 208 GTi black wrap
  • Peugeot 208 GTi white wrap
  • Peugeot 208 GTi gray wrap
  • Peugeot 208 GTi silver wrap
  • Peugeot 208 GTi red wrap
  • Peugeot 208 GTi blue wrap
  • Peugeot 208 GTi green wrap
  • Peugeot 208 GTi yellow wrap
  • Peugeot 208 GTi orange wrap
  • Peugeot 208 GTi purple wrap
  • Peugeot 208 GTi pink wrap
  • Peugeot 208 GTi teal wrap
  • Peugeot 208 GTi brown wrap
  • Peugeot 208 GTi gold wrap
  • Peugeot 208 GTi chrome wrap
  • Peugeot 208 GTi color shift wrap
  • Peugeot 208 GTi carbon fiber wrap
  • Peugeot 208 GTi camo and patterned wrap

How much vinyl to wrap a Peugeot 208 GTi

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2013–2019hatchback (3 doors)156.0 in (3,962 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Peugeot 208 GTi wrap cost factors

Peugeot 208 GTi wrap cost depends on the film type, the panels covered, and the amount of cut-out work. A full wrap uses about 46 ft (14 m) of cast film or about 57 ft (17.5 m) of chrome or patterned film. Parking sensors and fog lamps add cut-out time on every trim, while a sunroof adds a cut-out in the roof film. The three-door body reduces film area compared to a five-door, but installation on large doors still takes care.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2015: bumpers and lights differ between the versions, and so do the film cuts.

Peugeot 208 GTi wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot 208 GTi, first generation, factory photo
Factory color shown

2013–2019 Peugeot 208 GTi hatchback (first generation)

2013–2019hatchback (3 doors)156.0 in (3,962 mm)

The glass roof on some trims of the Peugeot 208 GTi is not wrapped because it is a glass panel. The roof stays dark whatever the color of the wrap film on the metal panels. The film ends at the roof rails to keep a clean edge. This means the roof area of the film estimate is not reduced on cars with the glass roof.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Peugeot 208 GTi

A partial wrap on a Peugeot 208 GTi can cover the hood, mirror caps, or the roof on cars without the glass panel. Chrome delete uses black film on the window trim and badges to cover the brightwork. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. Any of these smaller jobs can be done without wrapping the whole car.

  • Partial wrap: hood, mirror caps, roof on cars without the glass panel.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Peugeot 208 GTi: body, cut-outs and film

A Peugeot 208 GTi vinyl wrap on the 156.0 in (3,962 mm) subcompact hatchback uses fewer large panels than a longer car. The two long side doors are each covered with one large piece of film, so a three-door body has fewer seams than a five-door. The tailgate with its rear glass means the film ends at the edge of the glass. This compact shape keeps the wrap layout simple for an installer.

Peugeot 208 GTi wrap ideas should include cut-outs for parking sensors placed in the bumpers on every trim. Fog lamps in the front bumper also need precise cut-outs in the bumper film. The film on the tailgate stops at the edge of the rear glass, not around it. On some trims with a sunroof, the roof film is cut around its opening.

To work out how much vinyl to wrap a Peugeot 208 GTi, compare the first generation before and after the 2015 restyling. The body length remains 156.0 in (3,962 mm) for all years from 2013 to 2019. The film estimate of about 46 ft (14 m) of 60-inch (1.52 m) cast film applies to every car of this generation. The restyling changed trim details, not the main panels that take film.

Questions about wrapping a Peugeot 208 GTi

How much vinyl does it take to wrap a Peugeot 208 GTi?

A Peugeot 208 GTi takes about 46 ft (14 m) of 60-inch (1.52 m) cast film for a full wrap. That figure refers to the first generation hatchback body from 2013 to 2019. Chrome or patterned film uses about 57 ft (17.5 m) because of extra waste.

Can the roof of a Peugeot 208 GTi be wrapped?

Yes, the roof of a Peugeot 208 GTi can be wrapped on cars without the glass panel. Some trims have a panoramic glass roof, and glass is not wrapped. On cars with a sunroof, the roof film is cut around the sunroof opening.

Which years of the Peugeot 208 GTi take the same film cuts?

All first-generation Peugeot 208 GTi models from 2013 to 2019 take the same film cuts on the main body panels. The car was restyled in 2015, but the body length stayed at 156.0 in (3,962 mm). The tailgate, doors, and roof shape did not change enough to alter the wrap pattern.

Can I wrap only the hood or the roof of a Peugeot 208 GTi?

Yes, you can wrap only the hood or the roof of a Peugeot 208 GTi. A partial wrap often covers the hood, mirror caps, or the roof on cars without the glass panel. The roof film on a car with a sunroof is cut around the opening.