Wraps by car

Peugeot 206 wrap

The Peugeot 206 wrap page covers the single generation built from 1998 to 2012. A full wrap of the newest body takes about 41 ft (12.5 m) for the convertible to 51 ft (15.5 m) for the sedan using 60-inch (1.52 m) cast film. Chrome or patterned film can require up to about 61 ft (18.5 m). This subcompact came as a convertible, hatchback, sedan, or wagon with 2, 3, 4, or 5 doors.

1generations13.5 mof film for a full wrap

Peugeot 206, first generation, factory photo
Peugeot 206, first generation. Factory color shown.

Peugeot 206 wrap colors and ideas

  • Peugeot 206 black wrap
  • Peugeot 206 white wrap
  • Peugeot 206 gray wrap
  • Peugeot 206 silver wrap
  • Peugeot 206 red wrap
  • Peugeot 206 blue wrap
  • Peugeot 206 green wrap
  • Peugeot 206 yellow wrap
  • Peugeot 206 orange wrap
  • Peugeot 206 purple wrap
  • Peugeot 206 pink wrap
  • Peugeot 206 teal wrap
  • Peugeot 206 brown wrap
  • Peugeot 206 gold wrap
  • Peugeot 206 chrome wrap
  • Peugeot 206 color shift wrap
  • Peugeot 206 carbon fiber wrap
  • Peugeot 206 camo and patterned wrap

How much vinyl to wrap a Peugeot 206

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1998–2012convertible, hatchback, sedan, wagon (2 or 3 or 4 or 5 doors)150.5 in (3,822 mm) to 164.9 in (4,188 mm)about 41 ft (12.5 m) for the convertible to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m)

Peugeot 206 wrap cost factors

Peugeot 206 wrap cost depends on the body style and the film you pick. The smallest convertible needs about 41 ft (12.5 m) of 60-inch (1.52 m) cast film, and the longest sedan needs about 51 ft (15.5 m). Chrome or patterned film can push the amount to about 61 ft (18.5 m). A paint protection film (PPF) on the front end uses less film than a full color change wrap.

  • Film for a full wrap: about 41 ft (12.5 m) for the convertible to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).
  • Body: convertible, hatchback, sedan, wagon (2 or 3 or 4 or 5 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Peugeot 206 wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot 206, first generation, factory photo
Factory color shown

1998–2012 Peugeot 206 convertible, hatchback, sedan, wagon (first generation)

1998–2012convertible, hatchback, sedan, wagon (2 or 3 or 4 or 5 doors)150.5 in (3,822 mm) to 164.9 in (4,188 mm)

The open top of the Peugeot 206 convertible is handled differently in a wrap. A fabric top is not wrapped, and the film ends where the fabric begins. A folding hard top is wrapped as panels of its own. This keeps the vinyl from lifting at the edges of the roof.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 41 ft (12.5 m) for the convertible to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Peugeot 206

A partial wrap on a Peugeot 206 can cover the roof, hood, or mirror caps without a full color change wrap. Peugeot 206 chrome delete turns the window trim and badges black with film. Paint protection film (PPF) is a clear film applied to the front end. These smaller jobs use less material and still change the look or protect the paint.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Peugeot 206: body, cut-outs and film

The Peugeot 206 vinyl wrap must follow the body style, because the car ranges from 150.5 in (3,822 mm) to 164.9 in (4,188 mm). The convertible needs the least film at about 41 ft (12.5 m), while the sedan needs the most at about 51 ft (15.5 m) with 60-inch (1.52 m) cast film. A wagon or four-door hatchback sits between these figures. The door count changes the number of separate panels and edge work.

Peugeot 206 wrap ideas should account for several cut-outs and removable parts. A tailgate with the rear glass in it means the film ends at the edge of the glass. Some trims have parking sensors in the bumpers, so the film is cut around each sensor. Some trims also have fog lamps in the front bumper that require cut-outs in the bumper film.

To know how much vinyl to wrap a Peugeot 206, only one generation matters. This car was built from 1998 to 2012 with no second generation to change the panel sizes. The film estimate stays at about 41 ft (12.5 m) for the convertible to 51 ft (15.5 m) for the sedan with 60-inch (1.52 m) cast film. Chrome or patterned film may need up to about 61 ft (18.5 m).

Questions about wrapping a Peugeot 206

How much vinyl does it take to wrap a Peugeot 206?

A Peugeot 206 needs about 41 ft (12.5 m) for the convertible to 51 ft (15.5 m) for the sedan using 60-inch (1.52 m) cast film. Chrome or patterned film can require up to about 61 ft (18.5 m). The exact amount depends on the body style and how many extra pieces you wrap.

Is the top of a Peugeot 206 wrapped?

Yes and no, depending on the roof type. A fabric top of the Peugeot 206 is not wrapped, and the film ends where the fabric begins. A folding hard top is wrapped as panels of its own. This is the only exception on the convertible body.

Which Peugeot 206 body takes more film?

The sedan body of the Peugeot 206 takes more film than the convertible with the standard cast film. It needs about 51 ft (15.5 m) compared to about 41 ft (12.5 m) for the convertible on 60-inch (1.52 m) film. A hatchback or wagon falls between these two amounts.

Can I wrap only the hood or the roof of a Peugeot 206?

Yes, you can wrap only the hood or the roof of a Peugeot 206. A partial wrap covers the roof, hood, or mirror caps on their own. This uses less film than a full color change wrap and is a good way to try a finish or protect a single panel.