Wraps by car

Peugeot 308 GTi wrap

A Peugeot 308 GTi wrap covers the compact hatchback in a full color change vinyl wrap. The car has one generation in this catalog, produced from 2015 to now. A full wrap of the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film jobs need about 64 ft (19.5 m).

1generations15 mof film for a full wrap

Peugeot 308 GTi, first generation, factory photo
Peugeot 308 GTi, first generation. Factory color shown.

Peugeot 308 GTi wrap colors and ideas

  • Peugeot 308 GTi black wrap
  • Peugeot 308 GTi white wrap
  • Peugeot 308 GTi gray wrap
  • Peugeot 308 GTi silver wrap
  • Peugeot 308 GTi red wrap
  • Peugeot 308 GTi blue wrap
  • Peugeot 308 GTi green wrap
  • Peugeot 308 GTi yellow wrap
  • Peugeot 308 GTi orange wrap
  • Peugeot 308 GTi purple wrap
  • Peugeot 308 GTi pink wrap
  • Peugeot 308 GTi teal wrap
  • Peugeot 308 GTi brown wrap
  • Peugeot 308 GTi gold wrap
  • Peugeot 308 GTi chrome wrap
  • Peugeot 308 GTi color shift wrap
  • Peugeot 308 GTi carbon fiber wrap
  • Peugeot 308 GTi camo and patterned wrap

How much vinyl to wrap a Peugeot 308 GTi

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2015–nowhatchback (5 doors)167.4 in (4,253 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Peugeot 308 GTi wrap cost factors

Peugeot 308 GTi wrap cost depends mainly on the film type and the size of the job. The car needs about 49 ft (15 m) of standard cast film, but chrome or patterned film raises the material amount to about 64 ft (19.5 m). The wrap shop's labor time is also a factor, especially for the tailgate and sensor cut-outs. A partial job costs less in materials but still needs the same preparation work.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 2017: bumpers and lights differ between the versions, and so do the film cuts.

Peugeot 308 GTi wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot 308 GTi, first generation, factory photo
Factory color shown

2015–now Peugeot 308 GTi hatchback (first generation)

2015–nowhatchback (5 doors)167.4 in (4,253 mm)

The first generation Peugeot 308 GTi runs from 2015 to the present day. A restyling in 2017 changed the bumpers and lights, so film cut for one version does not fit the other. For a full wrap, use the same film amount for both versions, about 49 ft (15 m) of 60-inch (1.52 m) cast film. The body is a five-door hatchback with a length of 167.4 in (4,253 mm).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Peugeot 308 GTi

A partial wrap on a Peugeot 308 GTi can cover the roof, hood, or mirror caps. Chrome delete on this car means covering the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end for impact protection. Each of these jobs uses less film than a full wrap and can be done step by step.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Peugeot 308 GTi: body, cut-outs and film

A Peugeot 308 GTi vinyl wrap starts with the five-door hatchback body. Its length is 167.4 in (4,253 mm), which is typical for a compact car. The tailgate includes the rear glass, so the film ends at the edge of the glass. This shape means fewer complex curves on the main panels.

Peugeot 308 GTi wrap ideas often include chrome delete on the window trim and badges. The front bumper and headlights need careful cut-outs for sensors and washers. The rear bumper has parking sensors that must be cut around or removed. Side mirrors come off for a clean edge on the mirror caps.

To know how much vinyl to wrap a Peugeot 308 GTi, use about 49 ft (15 m) of 60-inch (1.52 m) film. This figure covers the current body style from 2015 onward. A restyling in 2017 changed the bumpers and lights, so film cut for one version does not fit the other. Always measure the actual car before ordering.

Questions about wrapping a Peugeot 308 GTi

How much vinyl does it take to wrap a Peugeot 308 GTi?

A Peugeot 308 GTi takes about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full wrap. If you choose chrome or patterned film, use about 64 ft (19.5 m) because of extra material needed for trimming and matching. These figures are for the newest body style from 2015 onward.

Which years of the Peugeot 308 GTi take the same film cuts?

The same film cuts fit the Peugeot 308 GTi from 2015 until the 2017 restyling. After 2017, the bumpers and lights changed, so film cut for the earlier version does not fit the later one. Always check the production date and the exact bumper design before ordering pre-cut film.

Can I wrap only the hood or the roof of a Peugeot 308 GTi?

Yes, you can wrap only the hood or the roof of a Peugeot 308 GTi. A partial wrap can also cover the mirror caps or delete chrome on the window trim and badges. Paint protection film on the front end is another partial option. These smaller jobs use less film than a full wrap.

Is a Peugeot 308 GTi hard to wrap?

A Peugeot 308 GTi is not hard to wrap, but it has some specific details. The tailgate includes the rear glass, so the film must end at the edge of the glass. The 167.4 in (4,253 mm) length is average for a compact hatchback, so no extra handling is needed. The restyled bumpers from 2017 may add some cut-out work.