Wraps by car

Peugeot iOn wrap

The Peugeot iOn wrap page covers the first-generation electric hatchback built from 2010 to 2015. Only one generation of the iOn appears in this catalog. A full wrap of the newest body takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 52 ft (16 m).

1generations13.5 mof film for a full wrap

Peugeot iOn, first generation, factory photo
Peugeot iOn, first generation. Factory color shown.

Peugeot iOn wrap colors and ideas

  • iOn black wrap
  • iOn white wrap
  • iOn gray wrap
  • iOn silver wrap
  • iOn red wrap
  • iOn blue wrap
  • iOn green wrap
  • iOn yellow wrap
  • iOn orange wrap
  • iOn purple wrap
  • iOn pink wrap
  • iOn teal wrap
  • iOn brown wrap
  • iOn gold wrap
  • iOn chrome wrap
  • iOn color shift wrap
  • iOn carbon fiber wrap
  • iOn camo and patterned wrap

How much vinyl to wrap a Peugeot iOn

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2010–2015hatchback (5 doors)136.8 in (3,474 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

iOn wrap cost factors

The iOn wrap cost depends on the size of the car, the film type, and how much preparation the paint needs. At 136.8 in (3,474 mm) long, the iOn is a mini hatchback, so it uses less film than a larger Peugeot. The charge port door and the tailgate glass add small extra steps to the job, which affects the total labor. A chrome or patterned film takes about 52 ft (16 m), more than a plain cast film at about 44 ft (13.5 m).

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

iOn wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot iOn, first generation, factory photo
Factory color shown

2010–2015 iOn hatchback (first generation)

2010–2015hatchback (5 doors)136.8 in (3,474 mm)

The first-generation Peugeot iOn was built from 2010 to 2015, so the paint may be original or repainted by now. A test spot on each panel is the safe way to check paint condition before a full wrap. The body is a five-door hatchback with the same shape for every trim in those years. The film estimate stays the same for all iOn cars of this generation.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on an iOn

A partial wrap on the iOn can cover the roof, the hood, or the mirror caps. An iOn chrome delete covers the window trim and badges with black film for a different look. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less material than a full wrap and can be done one panel at a time.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Peugeot iOn: body, cut-outs and film

A Peugeot iOn vinyl wrap has to manage the small footprint of a mini-class five-door hatchback. The car is 136.8 in (3,474 mm) long, so most panels are compact and can be cut from one piece. The tailgate includes the rear glass, which sets a clear edge for the film. The short wheelbase also means fewer large flat areas than on a mid-size car.

Some iOn wrap ideas start with the parts that need special treatment. The tailgate carries the rear glass, so the film ends at the edge of the glass and no film goes over the window. The charge port door is wrapped as a small piece of its own so it can open and close freely. The door handles and mirror caps come off for cleaner edges around those parts.

Knowing how much vinyl to wrap an iOn means checking the production years and paint condition. The first-generation iOn was built from 2010 to 2015, and panels may be original or repainted by now. A test spot on each panel shows whether the paint will hold the film well. The film estimate stays the same for every iOn of this generation because the body was not changed.

Questions about wrapping a Peugeot iOn

How much vinyl does it take to wrap a Peugeot iOn?

A full wrap of a Peugeot iOn takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, you need about 52 ft (16 m). The iOn is a compact five-door hatchback, so it uses less film than a larger car. These figures cover the newest body of the only generation in this catalog.

Can I wrap only the hood or the roof of an iOn?

Yes, you can wrap only the hood or the roof of an iOn. A partial wrap on this car covers the roof, the hood, or the mirror caps. You can also do a chrome delete on the window trim and badges. Paint protection film on the front end is another small job that leaves the rest of the car unwrapped.

Is an iOn hard to wrap?

The iOn is not hard to wrap, but two details add work. The tailgate has the rear glass in it, so the film must stop at the edge of the glass. The charge port door is wrapped as a small separate piece so it can still open. The car is only 136.8 in (3,474 mm) long, so most panels are small and easy to handle.

How many generations of the iOn does this page cover?

This page covers one generation of the Peugeot iOn. The first generation was built from 2010 to 2015. There are no other generations of the iOn in this catalog.