Wraps by car

Peugeot 307 wrap

The Peugeot 307 wrap page covers the first generation built from 2001 to 2008. A full vinyl wrap of the newest body takes about 46 ft (14 m) for the convertible to 61 ft (18.5 m) for the wagon. The page explains body styles, film amounts, and wrap details for this compact car.

1generations16.5 mof film for a full wrap

Peugeot 307, first generation, factory photo
Peugeot 307, first generation. Factory color shown.

Peugeot 307 wrap colors and ideas

  • Peugeot 307 black wrap
  • Peugeot 307 white wrap
  • Peugeot 307 gray wrap
  • Peugeot 307 silver wrap
  • Peugeot 307 red wrap
  • Peugeot 307 blue wrap
  • Peugeot 307 green wrap
  • Peugeot 307 yellow wrap
  • Peugeot 307 orange wrap
  • Peugeot 307 purple wrap
  • Peugeot 307 pink wrap
  • Peugeot 307 teal wrap
  • Peugeot 307 brown wrap
  • Peugeot 307 gold wrap
  • Peugeot 307 chrome wrap
  • Peugeot 307 color shift wrap
  • Peugeot 307 carbon fiber wrap
  • Peugeot 307 camo and patterned wrap

How much vinyl to wrap a Peugeot 307

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2001–2008convertible, hatchback, wagon (2 or 3 or 5 doors)165.4 in (4,202 mm) to 174.5 in (4,432 mm)about 46 ft (14 m) for the convertible to 61 ft (18.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m)

Peugeot 307 wrap cost factors

Peugeot 307 wrap cost depends on the body style and the film amount it needs. A wagon needs 61 ft (18.5 m) while a convertible needs about 46 ft (14 m), so material use drives the work. Patterned or chrome film adds up to about 69 ft (21 m). The number of cut-outs for sensors and fog lamps also changes the labor.

  • Film for a full wrap: about 46 ft (14 m) for the convertible to 61 ft (18.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).
  • Body: convertible, hatchback, wagon (2 or 3 or 5 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2005: bumpers and lights differ between the versions, and so do the film cuts.

Peugeot 307 wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot 307, first generation, factory photo
Factory color shown

2001–2008 Peugeot 307 convertible, hatchback, wagon (first generation)

2001–2008convertible, hatchback, wagon (2 or 3 or 5 doors)165.4 in (4,202 mm) to 174.5 in (4,432 mm)

The first generation Peugeot 307 with an open top is either a convertible with a fabric top or a folding hard top. A fabric top is not wrapped, and the film ends where the fabric begins. A folding hard top is wrapped as panels of its own, with seams at each panel edge.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 46 ft (14 m) for the convertible to 61 ft (18.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Peugeot 307

A partial wrap on a Peugeot 307 covers the roof, hood, or mirror caps. Peugeot 307 chrome delete covers window trim and badges with black film. Paint protection film (PPF) is clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Peugeot 307: body, cut-outs and film

A Peugeot 307 vinyl wrap follows the convertible, hatchback, and wagon bodies of this compact car. Lengths run from 165.4 in (4,202 mm) to 174.5 in (4,432 mm), so film needs change with the body. A full wrap uses 60-inch (1.52 m) cast film, and patterns or chrome add material.

Peugeot 307 wrap ideas must handle a tailgate with rear glass, where film ends at the glass edge. Convertible bodies are wrapped only on the metal: a fabric top is not wrapped, but a folding hard top gets film as its own panels. Some trims have parking sensors in the bumpers, so the film is cut around each sensor. Some trims have fog lamps in the front bumper, requiring cut-outs in the bumper film.

How much vinyl to wrap a Peugeot 307 changes with the body style and any added pattern. The first generation was restyled in 2005, but the body and film amounts stay the same. A wrap shop counts the body length and the 60-inch (1.52 m) film width when quoting.

Questions about wrapping a Peugeot 307

How much vinyl does it take to wrap a Peugeot 307?

A Peugeot 307 takes about 46 ft (14 m) to 61 ft (18.5 m) of 60-inch (1.52 m) cast film for a full wrap. The lower figure fits the convertible, and the higher figure fits the wagon. Chrome or patterned film can need up to about 69 ft (21 m).

Is the top of a Peugeot 307 wrapped?

The top of a Peugeot 307 convertible is not wrapped if it is fabric. A folding hard top is wrapped as panels of its own. The film on a fabric-top car ends where the fabric begins.

Which years of the Peugeot 307 take the same film cuts?

The Peugeot 307 years 2001 to 2008 take the same film cuts. The car was restyled in 2005, but the body shapes and wrap patterns did not change. All body styles from these years use the same basic cut templates.

Which Peugeot 307 body takes more film?

The Peugeot 307 wagon takes more film than the convertible. The wagon needs about 61 ft (18.5 m) of 60-inch (1.52 m) film, while the convertible needs about 46 ft (14 m). The hatchback sits between those two figures.