Wraps by car

Peugeot 106 wrap

A Peugeot 106 wrap covers the mini hatchback in cast vinyl wrap, and the car has one generation in the catalog. The Peugeot 106 was produced from 1991 to 2003 as a three- or five-door hatchback. A full wrap of the newest body takes about 43 ft (13 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 54 ft (16.5 m).

1generations13 mof film for a full wrap

Peugeot 106, first generation, factory photo
Peugeot 106, first generation. Factory color shown.

Peugeot 106 wrap colors and ideas

  • Peugeot 106 black wrap
  • Peugeot 106 white wrap
  • Peugeot 106 gray wrap
  • Peugeot 106 silver wrap
  • Peugeot 106 red wrap
  • Peugeot 106 blue wrap
  • Peugeot 106 green wrap
  • Peugeot 106 yellow wrap
  • Peugeot 106 orange wrap
  • Peugeot 106 purple wrap
  • Peugeot 106 pink wrap
  • Peugeot 106 teal wrap
  • Peugeot 106 brown wrap
  • Peugeot 106 gold wrap
  • Peugeot 106 chrome wrap
  • Peugeot 106 color shift wrap
  • Peugeot 106 carbon fiber wrap
  • Peugeot 106 camo and patterned wrap

How much vinyl to wrap a Peugeot 106

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1991–2003hatchback (3 or 5 doors)140.3 in (3,564 mm) to 144.8 in (3,678 mm)about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Peugeot 106 wrap cost factors

Peugeot 106 wrap cost depends on the size of the car, the film chosen, and the labor for its small complex panels. The car's length of 140.3 in (3,564 mm) to 144.8 in (3,678 mm) sets a base material need of about 43 ft (13 m) of 60-inch (1.52 m) film. Chrome or patterned film raises the estimate to about 54 ft (16.5 m) because pattern matching and trimming add work. Removing and reinstalling parts like mirrors and badges also affects the final cost.

  • Film for a full wrap: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: hatchback (3 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 1996: bumpers and lights differ between the versions, and so do the film cuts.

Peugeot 106 wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot 106, first generation, factory photo
Factory color shown

1991–2003 Peugeot 106 hatchback (first generation)

1991–2003hatchback (3 or 5 doors)140.3 in (3,564 mm) to 144.8 in (3,678 mm)

The first generation Peugeot 106 was built from 1991 to 2003, and the 1996 restyling changed the bumpers and lights. Film cut for one version does not fit the other, so pre-1996 and post-1996 cars need different templates. A wrap installer must confirm the production year before cutting film for the front or rear. The restyle did not change the glass or roof, so some panels remain interchangeable.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Peugeot 106

A partial wrap on a Peugeot 106 can cover the roof, hood, or mirror caps without doing the whole car. Peugeot 106 chrome delete covers window trim and badges with black film for a different look. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These smaller jobs use less film and take less time than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Peugeot 106: body, cut-outs and film

The Peugeot 106 vinyl wrap must account for the car's compact hatchback body and short overall length of 140.3 in (3,564 mm) to 144.8 in (3,678 mm). The three- and five-door styles differ in door count and trim around the rear side windows, affecting how film is cut. The small size means fewer panels than a larger car, but each panel has tight curves that need careful stretching. A precise template for the specific door style avoids waste and seams.

Peugeot 106 wrap ideas often include a tailgate with the rear glass in it, where the film ends at the edge of the glass. The installer must cut around the glass and handle the rubber seal without lifting the film. Door handles, mirrors, and badges are removed for a clean finish, then reinstalled. The roof rails are not present, but the antenna base on the roof requires a small cut-out.

How much vinyl to wrap a Peugeot 106 depends on the production version, because the 1996 restyling changed bumpers and lights. Film cut for one version does not fit the other, so a shop needs the correct template for pre- or post-1996 cars. The length differs by 4.5 in (114 mm) between early and late cars, which changes material use. A three-door car uses slightly less film than a five-door due to fewer door shuts.

Questions about wrapping a Peugeot 106

How much vinyl does it take to wrap a Peugeot 106?

It takes about 43 ft (13 m) of 60-inch (1.52 m) cast vinyl to wrap a Peugeot 106. If you use chrome or patterned film, plan for about 54 ft (16.5 m) because of extra trimming and alignment. The estimate covers the newest body style of the first generation. A skilled installer may use slightly less with careful cutting.

Which years of the Peugeot 106 take the same film cuts?

All Peugeot 106 hatchbacks from 1991 to 2003 take the same film cuts for the roof and glass, but the 1996 restyling changed bumpers and lights. Pre-1996 cars have different front and rear bumper film patterns than 1996 to 2003 cars. Check the production date to know which bumper template fits.

Can I wrap only the hood or the roof of a Peugeot 106?

Yes, you can wrap only the hood or the roof of a Peugeot 106 as a partial wrap. The hood is a single panel with a clear edge, and the roof is small enough for one piece of film. Mirror caps are also easy to wrap on their own. A chrome delete on window trim and badges is another small job.

Is a Peugeot 106 hard to wrap?

A Peugeot 106 is not hard to wrap, but the tailgate with the rear glass in it adds work because the film ends at the glass edge. The car's short length of 140.3 in (3,564 mm) to 144.8 in (3,678 mm) means tight curves on bumpers and arches. A careful installer can handle it with standard cast film and good surface preparation.