Wraps by car

Peugeot 202 wrap

A Peugeot 202 wrap covers the 1938-1948 body with new vinyl film. The catalog shows one generation of this car. A full wrap takes about 48 ft (14.5 m) of 60-inch cast film for the convertible. The sedan needs about 49 ft (15 m) of the same film.

1generations14.5 mof film for a full wrap

Peugeot 202, first generation, factory photo
Peugeot 202, first generation. Factory color shown.

Peugeot 202 wrap colors and ideas

  • Peugeot 202 black wrap
  • Peugeot 202 white wrap
  • Peugeot 202 gray wrap
  • Peugeot 202 silver wrap
  • Peugeot 202 red wrap
  • Peugeot 202 blue wrap
  • Peugeot 202 green wrap
  • Peugeot 202 yellow wrap
  • Peugeot 202 orange wrap
  • Peugeot 202 purple wrap
  • Peugeot 202 pink wrap
  • Peugeot 202 teal wrap
  • Peugeot 202 brown wrap
  • Peugeot 202 gold wrap
  • Peugeot 202 chrome wrap
  • Peugeot 202 color shift wrap
  • Peugeot 202 carbon fiber wrap
  • Peugeot 202 camo and patterned wrap

How much vinyl to wrap a Peugeot 202

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1938–1948convertible, sedan (2 or 4 doors)161.8 in (4,110 mm)about 48 ft (14.5 m) for the convertible to 49 ft (15 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m)

Peugeot 202 wrap cost factors

A Peugeot 202 wrap cost depends on body style, film type, and surface preparation. The small body uses about 48 ft (14.5 m) for the convertible or 49 ft (15 m) for the sedan in standard film. Chrome or patterned film can raise the amount to about 57 ft (17.5 m). Removing old paint defects or rust also adds labor.

  • Film for a full wrap: about 48 ft (14.5 m) for the convertible to 49 ft (15 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).
  • Body: convertible, sedan (2 or 4 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Peugeot 202 wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot 202, first generation, factory photo
Factory color shown

1938–1948 Peugeot 202 convertible, sedan (first generation)

1938–1948convertible, sedan (2 or 4 doors)161.8 in (4,110 mm)

On the first generation Peugeot 202, a fabric top is not wrapped and the film ends where it begins. The convertible's film stops at the base of the soft top, leaving the fabric bare. A folding hard top, if fitted, is wrapped as separate panels of its own. This keeps the top flexible and the wrap lines clean.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 48 ft (14.5 m) for the convertible to 49 ft (15 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Peugeot 202

A partial wrap on a Peugeot 202 can cover the roof, hood, or mirror caps. A Peugeot 202 chrome delete uses black film on the window trim and badges. Paint protection film (PPF) is a clear film applied to the front end. These smaller jobs refresh the look without a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Peugeot 202: body, cut-outs and film

The Peugeot 202 body styles affect how the film is cut and applied. The 161.8 in (4,110 mm) body length is the same for the convertible and the two- or four-door sedan. The convertible top is not wrapped, so film area stays close to the sedan. The four-door adds small panels around the rear door openings.

Typical Peugeot 202 wrap ideas include leaving the fabric top unpainted. The installer removes side mirrors, door handles, and badges before wrapping. The grille and headlight rings need careful cut-outs around their shapes. The film ends cleanly where the fabric top starts on the convertible.

How much vinyl to wrap a Peugeot 202 depends on body style, with one generation in the catalog. The convertible uses about 48 ft (14.5 m), and the sedan about 49 ft (15 m). Chrome or patterned film can need up to about 57 ft (17.5 m) because of matching patterns. Either size is manageable for a small pre-war car.

Questions about wrapping a Peugeot 202

How much vinyl does it take to wrap a Peugeot 202?

A Peugeot 202 wrap takes about 48 ft (14.5 m) to 49 ft (15 m) of 60-inch cast film. That estimate covers the convertible and the sedan. Extra film is added for chrome or patterned wraps.

Is the top of a Peugeot 202 wrapped?

No, the top of a Peugeot 202 is not wrapped when it is fabric. The film ends where the soft top begins. A folding hard top would be wrapped as separate panels.

Which Peugeot 202 body takes more film?

The Peugeot 202 sedan takes more film than the convertible. The sedan needs about 49 ft (15 m) and the convertible about 48 ft (14.5 m). The four-door sedan has two extra door gaps to trim around.

Can I wrap only the hood or the roof of a Peugeot 202?

Yes, you can wrap only the hood or the roof of a Peugeot 202. A partial wrap can cover the roof, hood, or mirror caps. Chrome delete covers window trim and badges, and clear PPF protects the front end.