Wraps by car

Peugeot 203 wrap

A Peugeot 203 wrap covers the body with new vinyl wrap in one of four body styles. The Peugeot 203 was built from 1948 to 1960 as a convertible, coupe, sedan, or wagon. A full wrap of the newest body takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film for the convertible and up to 59 ft (18 m) for the wagon.

1generations13.5 mof film for a full wrap

Peugeot 203, first generation, factory photo
Peugeot 203, first generation. Factory color shown.

Peugeot 203 wrap colors and ideas

  • Peugeot 203 black wrap
  • Peugeot 203 white wrap
  • Peugeot 203 gray wrap
  • Peugeot 203 silver wrap
  • Peugeot 203 red wrap
  • Peugeot 203 blue wrap
  • Peugeot 203 green wrap
  • Peugeot 203 yellow wrap
  • Peugeot 203 orange wrap
  • Peugeot 203 purple wrap
  • Peugeot 203 pink wrap
  • Peugeot 203 teal wrap
  • Peugeot 203 brown wrap
  • Peugeot 203 gold wrap
  • Peugeot 203 chrome wrap
  • Peugeot 203 color shift wrap
  • Peugeot 203 carbon fiber wrap
  • Peugeot 203 camo and patterned wrap

How much vinyl to wrap a Peugeot 203

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1948–1960convertible, coupe, sedan, wagon (2 or 4 or 5 doors)171.3 in (4,350 mm)about 44 ft (13.5 m) for the convertible to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)

Peugeot 203 wrap cost factors

Peugeot 203 wrap cost depends on the body style, the film grade, and how much of the car is covered. A convertible uses about 44 ft (13.5 m) of film, while a wagon uses up to about 59 ft (18 m). The condition of the paint and the amount of trim removal also change the labor. Patterned film or a chrome delete adds to the film and the time used.

  • Film for a full wrap: about 44 ft (13.5 m) for the convertible to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).
  • Body: convertible, coupe, sedan, wagon (2 or 4 or 5 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Peugeot 203 wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot 203, first generation, factory photo
Factory color shown

1948–1960 Peugeot 203 convertible, coupe, sedan, wagon (first generation)

1948–1960convertible, coupe, sedan, wagon (2 or 4 or 5 doors)171.3 in (4,350 mm)

The first generation Peugeot 203 has an open top on the convertible that is left unwrapped. The film ends at the edge of the fabric top, so the vinyl wrap stops where the top begins. If the car has a folding hard top, that top is wrapped as its own set of panels. A shop masks these edges carefully so the line between paint and top stays neat.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) for the convertible to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Peugeot 203

A partial wrap on a Peugeot 203 can cover the roof, hood, or mirror caps without wrapping the whole car. A chrome delete covers the window trim and badges with black film for a cleaner look. Paint protection film (PPF) is a clear option for the front end only. These jobs use less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Peugeot 203: body, cut-outs and film

A Peugeot 203 vinyl wrap has to follow the long, smooth sides of a body that measures 171.3 in (4,350 mm). The sedan and coupe have the simplest panels, so a shop can lay film with few seams. The wagon adds a large tailgate and more roof area, which increases the film used. The convertible has a smaller wrapped area because the top is not covered.

Peugeot 203 wrap ideas often start with a chrome delete, where bright trim is covered with black film on the window trim and badges. A tailgate with the rear glass in it means the film ends at the edge of the glass, so a wrap leaves that area clean. On a convertible, the fabric top is not wrapped and the film ends where the top begins. A folding hard top is wrapped as panels of its own.

How much vinyl to wrap a Peugeot 203 depends on the body style you own. The convertible needs about 44 ft (13.5 m) of cast film, the sedan and coupe sit between that and the wagon. The wagon needs about 59 ft (18 m) because of its taller roof and long rear panels. If you want chrome or patterned film on the trim, a shop may use up to about 66 ft (20 m).

Questions about wrapping a Peugeot 203

How much vinyl does it take to wrap a Peugeot 203?

A Peugeot 203 takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film for the convertible and about 59 ft (18 m) for the wagon. The coupe and sedan use an amount between those two figures. If you add chrome or patterned film, the total can go up to about 66 ft (20 m).

Is the top of a Peugeot 203 wrapped?

No, the fabric top of a Peugeot 203 convertible is not wrapped. The film ends at the edge of the top, and a folding hard top is wrapped as panels of its own. Only the metal body panels are covered with vinyl wrap.

Which Peugeot 203 body takes more film?

The Peugeot 203 wagon takes more film than the other body styles, about 59 ft (18 m) compared with about 44 ft (13.5 m) for the convertible. The sedan and coupe fall between those figures. The wagon has a larger roof and rear body area, which adds to the film used.

Can I wrap only the hood or the roof of a Peugeot 203?

Yes, you can wrap only the hood or the roof of a Peugeot 203 as a partial wrap. Other small jobs include the mirror caps or a chrome delete on the window trim and badges. Paint protection film on the front end is also an option.