Wraps by car

Peugeot 205 GTi wrap

The Peugeot 205 GTi wrap page covers the first and only generation of the Peugeot 205 GTi, produced from 1983 to 1998. This subcompact hatchback has three doors and measures 145.9 in (3,705 mm) in length. A full vinyl wrap of the newest body uses about 43 ft (13 m) of 60-inch (1.52 m) cast film.

1generations13 mof film for a full wrap

Peugeot 205 GTi, first generation, factory photo
Peugeot 205 GTi, first generation. Factory color shown.

Peugeot 205 GTi wrap colors and ideas

  • Peugeot 205 GTi black wrap
  • Peugeot 205 GTi white wrap
  • Peugeot 205 GTi gray wrap
  • Peugeot 205 GTi silver wrap
  • Peugeot 205 GTi red wrap
  • Peugeot 205 GTi blue wrap
  • Peugeot 205 GTi green wrap
  • Peugeot 205 GTi yellow wrap
  • Peugeot 205 GTi orange wrap
  • Peugeot 205 GTi purple wrap
  • Peugeot 205 GTi pink wrap
  • Peugeot 205 GTi teal wrap
  • Peugeot 205 GTi brown wrap
  • Peugeot 205 GTi gold wrap
  • Peugeot 205 GTi chrome wrap
  • Peugeot 205 GTi color shift wrap
  • Peugeot 205 GTi carbon fiber wrap
  • Peugeot 205 GTi camo and patterned wrap

How much vinyl to wrap a Peugeot 205 GTi

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1983–1998hatchback (3 doors)145.9 in (3,705 mm)about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Peugeot 205 GTi wrap cost factors

The Peugeot 205 GTi wrap cost depends on the film you choose and the condition of the 145.9 in (3,705 mm) body. A color change wrap needs about 43 ft (13 m) of cast film, while a chrome or patterned film takes about 54 ft (16.5 m). The size of the car sets the base material figure, and extra prep work adds to the final number.

  • Film for a full wrap: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

Peugeot 205 GTi wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot 205 GTi, first generation, factory photo
Factory color shown

1983–1998 Peugeot 205 GTi hatchback (first generation)

1983–1998hatchback (3 doors)145.9 in (3,705 mm)

The first generation Peugeot 205 GTi was built from 1983 to 1998, and paint age is the first thing a wrapper checks. Panels may be original or repainted, so a test spot comes before a full wrap to see how the film grips. Old paint can lift when the film is repositioned, so prep work is part of the job.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Peugeot 205 GTi

The Peugeot 205 GTi chrome delete and partial wrap options cover small jobs on a three-door hatchback. You can wrap the roof, hood, or mirror caps as a partial wrap, and a chrome delete covers the window trim and badges with black film. Clear paint protection film (PPF) on the front end is another way to protect the car without changing its color.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Peugeot 205 GTi: body, cut-outs and film

Wrapping a Peugeot 205 GTi means planning around its compact three-door hatchback body. The car is 145.9 in (3,705 mm) long, so every panel is small but sharply creased. A Peugeot 205 GTi vinyl wrap uses the same techniques as any color change wrap, just with less film per panel.

The Peugeot 205 GTi wrap ideas start with the tailgate, where the rear glass sits inside the panel, so the film ends at the edge of the glass. Each of the two long side doors is one large piece of film, which suits a clean color change. For a chrome delete, the window trim and badges are the parts to cover.

If you count how much vinyl to wrap a Peugeot 205 GTi, remember that only one generation exists, from 1983 to 1998. The single body style, a three-door hatchback, means the film estimate of about 43 ft (13 m) of 60-inch (1.52 m) cast film stays the same across the years. Paint age is the real variable on a car this old.

Questions about wrapping a Peugeot 205 GTi

How much vinyl does it take to wrap a Peugeot 205 GTi?

Yes, to wrap a Peugeot 205 GTi you need about 43 ft (13 m) of 60-inch (1.52 m) cast film for a standard color change wrap. For a chrome or patterned film, the figure rises to about 54 ft (16.5 m).

Can I wrap only the hood or the roof of a Peugeot 205 GTi?

Yes, you can wrap only the hood or the roof of a Peugeot 205 GTi as a partial wrap. The same goes for the mirror caps, or you can choose a chrome delete for the window trim and badges.

Is a Peugeot 205 GTi hard to wrap?

Yes, a Peugeot 205 GTi is harder to wrap than a modern car because the tailgate has the rear glass set into it, so the film must end at the edge of the glass. The two long side doors are each one large piece of film, which demands careful handling. The 145.9 in (3,705 mm) overall length keeps the job compact but detailed.

How many generations of the Peugeot 205 GTi does this page cover?

This page covers one generation of the Peugeot 205 GTi, produced from 1983 to 1998. That single generation is the only body style, a three-door hatchback.