Wraps by car

Peugeot 205 wrap

A Peugeot 205 wrap covers the paint with vinyl film cut to this subcompact body. The catalog holds one generation, produced from 1983 to 1998 as a hatchback or convertible. A full wrap of the newest body takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film for a convertible. A hatchback needs about 43 ft (13 m) of the same vinyl wrap.

1generations11.5 mof film for a full wrap

Peugeot 205, first generation, factory photo
Peugeot 205, first generation. Factory color shown.

Peugeot 205 wrap colors and ideas

  • Peugeot 205 black wrap
  • Peugeot 205 white wrap
  • Peugeot 205 gray wrap
  • Peugeot 205 silver wrap
  • Peugeot 205 red wrap
  • Peugeot 205 blue wrap
  • Peugeot 205 green wrap
  • Peugeot 205 yellow wrap
  • Peugeot 205 orange wrap
  • Peugeot 205 purple wrap
  • Peugeot 205 pink wrap
  • Peugeot 205 teal wrap
  • Peugeot 205 brown wrap
  • Peugeot 205 gold wrap
  • Peugeot 205 chrome wrap
  • Peugeot 205 color shift wrap
  • Peugeot 205 carbon fiber wrap
  • Peugeot 205 camo and patterned wrap

How much vinyl to wrap a Peugeot 205

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1983–1998convertible, hatchback (2 or 3 or 5 doors)145.9 in (3,705 mm)about 38 ft (11.5 m) for the convertible to 43 ft (13 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 54 ft (16.5 m)

Peugeot 205 wrap cost factors

A Peugeot 205 wrap cost depends on the size of the body and the film you choose. A hatchback needs about 43 ft (13 m) of 60-inch (1.52 m) film. A convertible takes about 38 ft (11.5 m), with less labour around the fixed roof. Chrome or patterned film needs up to about 54 ft (16.5 m) on a hatchback.

  • Film for a full wrap: about 38 ft (11.5 m) for the convertible to 43 ft (13 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 54 ft (16.5 m).
  • Body: convertible, hatchback (2 or 3 or 5 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Peugeot 205 wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot 205, first generation, factory photo
Factory color shown

1983–1998 Peugeot 205 convertible, hatchback (first generation)

1983–1998convertible, hatchback (2 or 3 or 5 doors)145.9 in (3,705 mm)

The first generation Peugeot 205 was built from 1983 to 1998 as a hatchback or convertible. On a convertible, the fabric top is not wrapped and the film ends where the top begins. A folding hard top, when fitted, is wrapped as panels of its own. The film estimate for this generation is about 38 ft (11.5 m) for the open car.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 38 ft (11.5 m) for the convertible to 43 ft (13 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Peugeot 205

A partial wrap on a Peugeot 205 covers a selected area instead of the whole body. You can wrap the roof, the hood or the mirror caps in a color of your choice. A chrome delete covers the window trim and the badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard the paint.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Peugeot 205: body, cut-outs and film

A Peugeot 205 vinyl wrap follows the short overhangs and the flat sides of this subcompact. The hatchback comes with two, three or five doors and is 145.9 in (3,705 mm) long. The convertible shares that length but has a fabric top that is not wrapped. That body style needs less film than the enclosed hatchback.

Peugeot 205 wrap ideas should account for the tailgate with its large rear glass. The film ends at the edge of that glass, so the installer cuts the panel around it. On a convertible, the fabric top is never covered and the film ends where the top begins. A folding hard top, where fitted, is wrapped as separate panels of its own.

How much vinyl to wrap a Peugeot 205 depends on the body style you count for. A hatchback uses about 43 ft (13 m) of 60-inch (1.52 m) cast film. A convertible takes about 38 ft (11.5 m) because the fabric top is left uncovered. A patterned or chrome film can need up to about 54 ft (16.5 m) on a hatchback.

Questions about wrapping a Peugeot 205

How much vinyl does it take to wrap a Peugeot 205?

About 38 ft (11.5 m) of vinyl wraps a Peugeot 205 convertible and about 43 ft (13 m) covers a hatchback. That figure uses 60-inch (1.52 m) cast film on the newest body in the catalog. A chrome or patterned film on the hatchback can take up to about 54 ft (16.5 m). The fabric top of a convertible is never wrapped.

Is the top of a Peugeot 205 wrapped?

No, the fabric top of a Peugeot 205 convertible is not wrapped. The film ends where the top begins, at its edges. A folding hard top, where fitted, is wrapped as panels of its own. The hatchback has no separate top, so the roof panel is wrapped with the rest of the body.

Which Peugeot 205 body takes more film?

The Peugeot 205 hatchback takes more film than the convertible. A hatchback needs about 43 ft (13 m) of 60-inch (1.52 m) cast film. A convertible takes about 38 ft (11.5 m) because its fabric top is left uncovered. For patterned or chrome film on a hatchback, allow up to about 54 ft (16.5 m).

Can I wrap only the hood or the roof of a Peugeot 205?

Yes, you can wrap only the hood or the roof of a Peugeot 205. A partial wrap covers chosen panels such as the roof, hood or mirror caps. A chrome delete covers the window trim and badges with black film instead. Clear paint protection film (PPF) on the front end is also a smaller job than a full wrap.