Wraps by car

Peugeot 304 wrap

The Peugeot 304 wrap page covers the single generation built from 1969 to 1980. It includes the convertible, hatchback, sedan, and wagon body styles. A full vinyl wrap on the newest body takes about 38 ft (11.5 m) for the convertible to 48 ft (14.5 m) for the wagon.

1generations11.5 mof film for a full wrap

Peugeot 304, first generation, factory photo
Peugeot 304, first generation. Factory color shown.

Peugeot 304 wrap colors and ideas

  • Peugeot 304 black wrap
  • Peugeot 304 white wrap
  • Peugeot 304 gray wrap
  • Peugeot 304 silver wrap
  • Peugeot 304 red wrap
  • Peugeot 304 blue wrap
  • Peugeot 304 green wrap
  • Peugeot 304 yellow wrap
  • Peugeot 304 orange wrap
  • Peugeot 304 purple wrap
  • Peugeot 304 pink wrap
  • Peugeot 304 teal wrap
  • Peugeot 304 brown wrap
  • Peugeot 304 gold wrap
  • Peugeot 304 chrome wrap
  • Peugeot 304 color shift wrap
  • Peugeot 304 carbon fiber wrap
  • Peugeot 304 camo and patterned wrap

How much vinyl to wrap a Peugeot 304

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1969–1980convertible, hatchback, sedan, wagon (2 or 3 or 4 or 5 doors)147.6 in (3,750 mm) to 163.0 in (4,140 mm)about 38 ft (11.5 m) for the convertible to 48 ft (14.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m)

Peugeot 304 wrap cost factors

Peugeot 304 wrap cost depends on the body style and the film used. The convertible needs about 38 ft (11.5 m) and the wagon about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. A chrome or patterned film takes up to about 62 ft (19 m) and costs more in material. Removing trim and working around the tailgate glass adds labor time.

  • Film for a full wrap: about 38 ft (11.5 m) for the convertible to 48 ft (14.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).
  • Body: convertible, hatchback, sedan, wagon (2 or 3 or 4 or 5 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Peugeot 304 wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot 304, first generation, factory photo
Factory color shown

1969–1980 Peugeot 304 convertible, hatchback, sedan, wagon (first generation)

1969–1980convertible, hatchback, sedan, wagon (2 or 3 or 4 or 5 doors)147.6 in (3,750 mm) to 163.0 in (4,140 mm)

On the first generation Peugeot 304, the open top of the convertible is not covered with vinyl wrap. The film ends where the fabric top begins, leaving the soft top untouched. A folding hard top is wrapped as separate panels of its own. The wrap does not interfere with the top mechanism.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 38 ft (11.5 m) for the convertible to 48 ft (14.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Peugeot 304

A partial wrap on a Peugeot 304 can cover the roof, hood, or mirror caps with the body color. Peugeot 304 chrome delete means the window trim and badges are covered with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs need much less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Peugeot 304: body, cut-outs and film

The Peugeot 304 vinyl wrap changes with the body style because the car ranges from 147.6 in (3,750 mm) to 163.0 in (4,140 mm). The convertible uses the least film and the wagon the most due to the extra roof area. A compact body means most panels can be wrapped with 60-inch (1.52 m) cast film. The door count does not change the film estimate much, but the tailgate design does.

Peugeot 304 wrap ideas must account for a tailgate with the rear glass in it where the film ends at the edge of the glass. On a convertible body, a fabric top is not wrapped and the film ends where it begins. A folding hard top is wrapped as panels of its own if fitted. Badges and door handles are removed for a cleaner finish.

How much vinyl to wrap a Peugeot 304 is set by the one generation in the catalog. Without a second body shape, the estimate stays between 38 ft (11.5 m) for the convertible and 48 ft (14.5 m) for the wagon. A chrome or patterned film can need up to about 62 ft (19 m) because the pattern must be matched. The 60-inch (1.52 m) cast film width suits the compact panels of this car.

Questions about wrapping a Peugeot 304

How much vinyl does it take to wrap a Peugeot 304?

A Peugeot 304 takes about 38 ft (11.5 m) of 60-inch (1.52 m) wrap film for the convertible and about 48 ft (14.5 m) for the wagon. These figures are for the newest body of the single generation built from 1969 to 1980. The actual amount depends on the body style and the film pattern.

Is the top of a Peugeot 304 wrapped?

No, the top of a Peugeot 304 is not wrapped when it is a fabric convertible top. The vinyl wrap ends where the fabric begins. Only a folding hard top is wrapped as panels of its own.

Which Peugeot 304 body takes more film?

The wagon body of the Peugeot 304 takes more film than the convertible. A full wrap on the wagon is about 48 ft (14.5 m), while the convertible is about 38 ft (11.5 m). The hatchback and sedan fall between these two.

Can I wrap only the hood or the roof of a Peugeot 304?

Yes, you can wrap only the hood or the roof of a Peugeot 304 as a partial wrap. Mirror caps are another small area that can be done in the same film. This uses less material and time than a full wrap.