Wraps by car

Peugeot 305 wrap

The Peugeot 305 wrap guide covers the single generation produced from 1977 to 1990. A full vinyl wrap of the newest sedan body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. The wagon needs roughly 51 ft (15.5 m) of the same film. This compact car was offered as a sedan and a wagon with 4 or 5 doors.

1generations15.5 mof film for a full wrap

Peugeot 305, first generation, factory photo
Peugeot 305, first generation. Factory color shown.

Peugeot 305 wrap colors and ideas

  • Peugeot 305 black wrap
  • Peugeot 305 white wrap
  • Peugeot 305 gray wrap
  • Peugeot 305 silver wrap
  • Peugeot 305 red wrap
  • Peugeot 305 blue wrap
  • Peugeot 305 green wrap
  • Peugeot 305 yellow wrap
  • Peugeot 305 orange wrap
  • Peugeot 305 purple wrap
  • Peugeot 305 pink wrap
  • Peugeot 305 teal wrap
  • Peugeot 305 brown wrap
  • Peugeot 305 gold wrap
  • Peugeot 305 chrome wrap
  • Peugeot 305 color shift wrap
  • Peugeot 305 carbon fiber wrap
  • Peugeot 305 camo and patterned wrap

How much vinyl to wrap a Peugeot 305

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1977–1990sedan, wagon (4 or 5 doors)167.0 in (4,242 mm) to 167.7 in (4,260 mm)about 48 ft (14.5 m) for the sedan to 51 ft (15.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)

Peugeot 305 wrap cost factors

Peugeot 305 wrap cost depends on the body style, the film type, and the shop labor. A wagon is slightly longer than a sedan, which adds film and time. Special finishes like chrome or patterned film can push material needs up to about 66 ft (20 m). Removing trim and badges also adds labor to the job.

  • Film for a full wrap: about 48 ft (14.5 m) for the sedan to 51 ft (15.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).
  • Body: sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Peugeot 305 wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot 305, first generation, factory photo
Factory color shown

1977–1990 Peugeot 305 sedan, wagon (first generation)

1977–1990sedan, wagon (4 or 5 doors)167.0 in (4,242 mm) to 167.7 in (4,260 mm)

The first generation Peugeot 305 was made from 1977 to 1990 as a sedan and a wagon. The sedan is about 167.0 in (4,242 mm) long and the wagon about 167.7 in (4,260 mm), so panel plans are similar up to the rear axle. The wagon roofline and rear glass add a little more film and a different pattern. Most owners wrap either style with a standard 60-inch (1.52 m) cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) for the sedan to 51 ft (15.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Peugeot 305

A partial wrap on a Peugeot 305 can be a roof, hood, or mirror caps in a contrasting color. Chrome delete covers the window trim and badges with black film for a cleaner look. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These smaller jobs use less material than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Peugeot 305: body, cut-outs and film

A Peugeot 305 vinyl wrap fits a compact body between 167.0 in (4,242 mm) and 167.7 in (4,260 mm) long. The sedan and wagon share the same front structure but differ behind the rear doors. A wagon adds roof length and taller rear pillars, so the wrap uses more material. The number of doors also changes how you plan the panel seams.

Peugeot 305 wrap ideas start with a full color change or a partial accent. The rear hatch on the wagon includes the rear glass, so the film ends at the edge of the glass. Door handles, mirrors, and trim pieces need cut-outs or removal for a clean install. A two-tone layout works well on the sedan and wagon body lines.

To work out how much vinyl to wrap a Peugeot 305, compare the two body styles. The sedan needs about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. The wagon needs about 51 ft (15.5 m) of the same film, a difference of roughly 3 ft (1 m). Buying extra for mistakes and complex areas is part of planning the project.

Questions about wrapping a Peugeot 305

How much vinyl does it take to wrap a Peugeot 305?

A full wrap of a Peugeot 305 takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film for the sedan and about 51 ft (15.5 m) for the wagon. These figures assume a single color with no complex patterns. Add extra film if you plan a chrome or patterned design.

Which Peugeot 305 body takes more film?

The wagon takes more film than the sedan: about 51 ft (15.5 m) compared to about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. The wagon body is longer and has a taller tailgate area, which adds material. The sedan is slightly shorter, so it uses a little less.

Can I wrap only the hood or the roof of a Peugeot 305?

Yes, you can wrap only the hood or the roof of a Peugeot 305. A partial wrap is a smaller job that focuses on specific panels. The roof and hood are the most common areas for a single panel wrap.

Is a Peugeot 305 hard to wrap?

A Peugeot 305 is not especially hard to wrap, but the wagon tailgate adds work because the rear glass is part of the hatch. The film must end cleanly at the edge of the glass. The compact size and simple body lines of the sedan make it straightforward for an experienced installer.