Wraps by car

Peugeot 306 wrap

A Peugeot 306 wrap covers one generation of this compact car produced from 1993 through 2002. The page describes the body styles, the areas that need cut-outs or removal, and how much vinyl wrap each version uses. A full wrap of the newest body takes about 44 ft (13.5 m) for the convertible to 52 ft (16 m) for the wagon with 60-inch (1.52 m) cast film.

1generations14 mof film for a full wrap

Peugeot 306, first generation, factory photo
Peugeot 306, first generation. Factory color shown.

Peugeot 306 wrap colors and ideas

  • Peugeot 306 black wrap
  • Peugeot 306 white wrap
  • Peugeot 306 gray wrap
  • Peugeot 306 silver wrap
  • Peugeot 306 red wrap
  • Peugeot 306 blue wrap
  • Peugeot 306 green wrap
  • Peugeot 306 yellow wrap
  • Peugeot 306 orange wrap
  • Peugeot 306 purple wrap
  • Peugeot 306 pink wrap
  • Peugeot 306 teal wrap
  • Peugeot 306 brown wrap
  • Peugeot 306 gold wrap
  • Peugeot 306 chrome wrap
  • Peugeot 306 color shift wrap
  • Peugeot 306 carbon fiber wrap
  • Peugeot 306 camo and patterned wrap

How much vinyl to wrap a Peugeot 306

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1993–2002convertible, hatchback, sedan, wagon (2 or 3 or 4 or 5 doors)157.3 in (3,995 mm) to 171.1 in (4,345 mm)about 44 ft (13.5 m) for the convertible to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m)

Peugeot 306 wrap cost factors

What a Peugeot 306 wrap cost depends on is the body style because film use ranges from about 44 ft (13.5 m) to 52 ft (16 m). A longer wagon needs more material than the shorter convertible, and a chrome delete raises the total film to up to about 67 ft (20.5 m). The number of doors and whether the trim is removed also changes the labor. The film type, such as cast vinyl or patterned film, affects the material amount.

  • Film for a full wrap: about 44 ft (13.5 m) for the convertible to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).
  • Body: convertible, hatchback, sedan, wagon (2 or 3 or 4 or 5 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Peugeot 306 wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot 306, first generation, factory photo
Factory color shown

1993–2002 Peugeot 306 convertible, hatchback, sedan, wagon (first generation)

1993–2002convertible, hatchback, sedan, wagon (2 or 3 or 4 or 5 doors)157.3 in (3,995 mm) to 171.1 in (4,345 mm)

The first generation Peugeot 306 from 1993 to 2002 includes an open top on the convertible body. A fabric top is not wrapped, so the vinyl ends exactly where the top begins at the body line. If the car has a folding hard top, that top is wrapped as its own separate panels. This keeps the wrap clean and avoids lifting along the roof edges.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) for the convertible to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Peugeot 306

A partial wrap for a Peugeot 306 covers the roof, hood, or mirror caps without wrapping the whole car. A Peugeot 306 chrome delete covers the window trim and badges with black film to change the bright trim look. Paint protection film (PPF) on the front end is a clear film that guards the hood, fenders, and bumper from stone chips. These smaller jobs use much less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Peugeot 306: body, cut-outs and film

The Peugeot 306 vinyl wrap depends on the body style because lengths run from 157.3 in (3,995 mm) to 171.1 in (4,345 mm). The convertible has a fabric top that is not wrapped, so film ends where the top begins. The hatchback and sedan have similar panel counts while the wagon adds more vertical surface at the rear. Door count from two to five changes the amount of door film and the areas around the handles.

Peugeot 306 wrap ideas must account for the tailgate with the rear glass in it, so the film ends at the edge of the glass. Badges and door handles come off for a cleaner install, and the side mirrors are wrapped off the car. On the convertible the folding hard top is wrapped as panels of its own if fitted. The front bumper and grille area need relief cuts around fog lights and lower intakes.

To know how much vinyl to wrap a Peugeot 306, compare the single generation from 1993 to 2002. The convertible uses about 44 ft (13.5 m) of 60-inch film while the wagon uses about 52 ft (16 m). A chrome delete or patterned film can take up to about 67 ft (20.5 m) because of extra material for trim pieces. The hatchback and sedan fall between those figures based on their length and roof area.

Questions about wrapping a Peugeot 306

How much vinyl does it take to wrap a Peugeot 306?

It takes about 44 ft (13.5 m) to 52 ft (16 m) of 60-inch (1.52 m) cast film to wrap a Peugeot 306, depending on the body style. The convertible uses the low end and the wagon uses the high end. Chrome or patterned film can require up to about 67 ft (20.5 m).

Is the top of a Peugeot 306 wrapped?

Yes, the top of a Peugeot 306 is wrapped only if it is a folding hard top. A fabric convertible top is not wrapped because the film cannot adhere to the material. The vinyl ends where the fabric top begins.

Which Peugeot 306 body takes more film?

The wagon takes more film than the convertible for a Peugeot 306 wrap. The wagon needs about 52 ft (16 m) of 60-inch film while the convertible needs about 44 ft (13.5 m). The hatchback and sedan sit between those amounts.

Can I wrap only the hood or the roof of a Peugeot 306?

Yes, you can wrap only the hood or the roof of a Peugeot 306 as a partial wrap. Other partial jobs include mirror caps, a chrome delete on window trim and badges, and clear paint protection film on the front end. These jobs use much less film than a full wrap.