Wraps by car

Peugeot 309 wrap

The Peugeot 309 wrap page covers the single generation sold from 1985 to 1993. The car is a compact hatchback offered with three or five doors. A full vinyl wrap of the newest body takes about 46 ft (14 m) of 60-inch (1.52 m) cast film.

1generations14 mof film for a full wrap

Peugeot 309, first generation, factory photo
Peugeot 309, first generation. Factory color shown.

Peugeot 309 wrap colors and ideas

  • Peugeot 309 black wrap
  • Peugeot 309 white wrap
  • Peugeot 309 gray wrap
  • Peugeot 309 silver wrap
  • Peugeot 309 red wrap
  • Peugeot 309 blue wrap
  • Peugeot 309 green wrap
  • Peugeot 309 yellow wrap
  • Peugeot 309 orange wrap
  • Peugeot 309 purple wrap
  • Peugeot 309 pink wrap
  • Peugeot 309 teal wrap
  • Peugeot 309 brown wrap
  • Peugeot 309 gold wrap
  • Peugeot 309 chrome wrap
  • Peugeot 309 color shift wrap
  • Peugeot 309 carbon fiber wrap
  • Peugeot 309 camo and patterned wrap

How much vinyl to wrap a Peugeot 309

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1985–1993hatchback (3 or 5 doors)159.4 in (4,050 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Peugeot 309 wrap cost factors

Peugeot 309 wrap cost follows the film choice and the labor the body asks for. A full wrap uses about 46 ft (14 m) of cast film, and chrome or patterned film raises that to about 57 ft (17.5 m). The 1989 restyling can add time because bumper and light cuts differ by version.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: hatchback (3 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 1989: bumpers and lights differ between the versions, and so do the film cuts.

Peugeot 309 wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot 309, first generation, factory photo
Factory color shown

1985–1993 Peugeot 309 hatchback (first generation)

1985–1993hatchback (3 or 5 doors)159.4 in (4,050 mm)

The first generation Peugeot 309 was built from 1985 to 1993 and restyled in 1989. The restyling changed the bumpers and lights, so film cut for one version does not fit the other. The tailgate still has the rear glass set into it, keeping the same trimming point across the run.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Peugeot 309

A Peugeot 309 chrome delete covers the window trim and badges with black film. A partial wrap can take care of the roof, the hood, or the mirror caps only. Paint protection film (PPF) in clear form protects the front end without changing the color.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Peugeot 309: body, cut-outs and film

A Peugeot 309 vinyl wrap must follow the compact hatchback shape and its 159.4 in (4,050 mm) length. The three-door and five-door bodies change only the door cut lines, not the main wrap coverage. The modest size keeps the job manageable with standard 60-inch (1.52 m) film rolls.

Peugeot 309 wrap ideas include hiding the tailgate where the rear glass sits inside the panel. The film ends at the edge of that glass, so the installer trims carefully around it. Mirrors, door handles, and badges come off or are cut out for a clean finish.

How much vinyl to wrap a Peugeot 309 depends on the restyling it carries. Before 1989 the bumpers and lights need one cut set, and after 1989 they need another. The body length stays 159.4 in (4,050 mm), but the front and rear film pieces do not swap between versions.

Questions about wrapping a Peugeot 309

How much vinyl does it take to wrap a Peugeot 309?

A full wrap of a Peugeot 309 takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. That figure covers the newest body from the single 1985–1993 generation. Chrome or patterned film needs about 57 ft (17.5 m) for the same car.

Which years of the Peugeot 309 take the same film cuts?

The Peugeot 309 was built from 1985 to 1993 and restyled in 1989, so the years 1985–1988 and 1989–1993 take different film cuts. Bumper and light changes in 1989 mean a kit for one version will not match the other.

Can I wrap only the hood or the roof of a Peugeot 309?

Yes, you can wrap only the hood or the roof of a Peugeot 309. The partial wrap options on this car include the roof, hood, and mirror caps. A chrome delete on the window trim and badges is also done without a full wrap.

Is a Peugeot 309 hard to wrap?

A Peugeot 309 is not especially hard to wrap, but the tailgate adds work because the rear glass sits in it. The film must end at the edge of that glass with a clean cut. The compact 159.4 in (4,050 mm) body is small enough for a standard 60-inch (1.52 m) roll.