Wraps by car

Peugeot 402 wrap

A Peugeot 402 wrap covers this classic French car in vinyl wrap, and the model has one generation in the catalog. The first generation ran from 1935 to 1942 and includes convertible, coupe, and sedan bodies. A full wrap of the newest body takes about 39 ft (12 m) for the convertible to 62 ft (19 m) for the sedan using 60-inch (1.52 m) cast film.

1generations12 mof film for a full wrap

Peugeot 402, first generation, factory photo
Peugeot 402, first generation. Factory color shown.

Peugeot 402 wrap colors and ideas

  • Peugeot 402 black wrap
  • Peugeot 402 white wrap
  • Peugeot 402 gray wrap
  • Peugeot 402 silver wrap
  • Peugeot 402 red wrap
  • Peugeot 402 blue wrap
  • Peugeot 402 green wrap
  • Peugeot 402 yellow wrap
  • Peugeot 402 orange wrap
  • Peugeot 402 purple wrap
  • Peugeot 402 pink wrap
  • Peugeot 402 teal wrap
  • Peugeot 402 brown wrap
  • Peugeot 402 gold wrap
  • Peugeot 402 chrome wrap
  • Peugeot 402 color shift wrap
  • Peugeot 402 carbon fiber wrap
  • Peugeot 402 camo and patterned wrap

How much vinyl to wrap a Peugeot 402

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1935–1942convertible, coupe, sedan (2 or 4 doors)165.4 in (4,200 mm) to 206.7 in (5,250 mm)about 39 ft (12 m) for the convertible to 62 ft (19 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m)

Peugeot 402 wrap cost factors

A Peugeot 402 wrap cost depends on the body style, the film finish, and the amount of chrome or trim to cover. The convertible needs about 39 ft (12 m) of film while the sedan needs about 62 ft (19 m), so the larger body takes more material and more labor. Chrome or patterned film raises the total because it can take up to about 70 ft (21.5 m) and requires careful cutting around brightwork.

  • Film for a full wrap: about 39 ft (12 m) for the convertible to 62 ft (19 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).
  • Body: convertible, coupe, sedan (2 or 4 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Peugeot 402 wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot 402, first generation, factory photo
Factory color shown

1935–1942 Peugeot 402 convertible, coupe, sedan (first generation)

1935–1942convertible, coupe, sedan (2 or 4 doors)165.4 in (4,200 mm) to 206.7 in (5,250 mm)

The Peugeot 402 first generation from 1935 to 1942 has an open top on the convertible that is not wrapped. The fabric top is left as it is and the vinyl film ends neatly where the top begins, so the body color change stops at that line. A folding hard top is wrapped as panels of its own, and every seam follows the panel gaps of the roof.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 39 ft (12 m) for the convertible to 62 ft (19 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Peugeot 402

A partial wrap on a Peugeot 402 can cover the roof, hood, or mirror caps without wrapping the whole car. A chrome delete covers the window trim and badges with black film, and paint protection film (PPF) puts clear film on the front end. These jobs use less film than a full wrap and can be planned on any body style.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Peugeot 402: body, cut-outs and film

A Peugeot 402 vinyl wrap has to follow quite different body shapes, from a 165.4 in (4,200 mm) convertible to a 206.7 in (5,250 mm) sedan. That range means a shop splits the work into sections and cuts film for each panel separately. The convertible needs the least film while the sedan takes the most and gives more flat surfaces. Wrapping a coupe falls between the two in size and film use.

Peugeot 402 wrap ideas start with removable chrome or patterned film because door handles, hinges, and bright trim need cut-outs. Installers remove badges, mirrors, and small trim pieces before laying the film and put them back afterwards. The fabric top on the convertible is not wrapped and the film ends where it begins, while a folding hard top is wrapped as panels of its own.

How much vinyl to wrap a Peugeot 402 changes only with body style and finish because the car has one generation. The convertible takes about 39 ft (12 m) and the sedan about 62 ft (19 m) of 60-inch (1.52 m) cast film. Chrome or patterned film can take up to about 70 ft (21.5 m) when the install follows the trim lines and adds inlays.

Questions about wrapping a Peugeot 402

How much vinyl does it take to wrap a Peugeot 402?

A Peugeot 402 takes about 39 ft (12 m) of 60-inch (1.52 m) cast film for the convertible and about 62 ft (19 m) for the sedan. Chrome or patterned film can take up to about 70 ft (21.5 m) because the installer must follow trim lines and add inlays.

Is the top of a Peugeot 402 wrapped?

No, the fabric top of a Peugeot 402 convertible is not wrapped, and the film ends where the top begins. A folding hard top is wrapped as panels of its own, but a fabric top is left as it is.

Which Peugeot 402 body takes more film?

The Peugeot 402 sedan takes more film than the convertible, about 62 ft (19 m) versus 39 ft (12 m) of 60-inch (1.52 m) cast film. The coupe sits between them because its body is shorter than the sedan but longer than the convertible.

Can I wrap only the hood or the roof of a Peugeot 402?

Yes, you can wrap only the hood or the roof of a Peugeot 402 as a partial wrap. Mirror caps and chrome delete on the window trim and badges are also separate jobs, and clear paint protection film (PPF) on the front end is another option.