Wraps by car

Peugeot 403 wrap

The Peugeot 403 wrap page covers the one generation built from 1955 to 1966. A full vinyl wrap of the newest body takes about 46 ft (14 m) for the convertible to 62 ft (19 m) for the wagon. The 60-inch (1.52 m) cast film is the usual choice for a color change. Chrome or patterned film adds up to about 70 ft (21.5 m).

1generations14 mof film for a full wrap

Peugeot 403, first generation, factory photo
Peugeot 403, first generation. Factory color shown.

Peugeot 403 wrap colors and ideas

  • Peugeot 403 black wrap
  • Peugeot 403 white wrap
  • Peugeot 403 gray wrap
  • Peugeot 403 silver wrap
  • Peugeot 403 red wrap
  • Peugeot 403 blue wrap
  • Peugeot 403 green wrap
  • Peugeot 403 yellow wrap
  • Peugeot 403 orange wrap
  • Peugeot 403 purple wrap
  • Peugeot 403 pink wrap
  • Peugeot 403 teal wrap
  • Peugeot 403 brown wrap
  • Peugeot 403 gold wrap
  • Peugeot 403 chrome wrap
  • Peugeot 403 color shift wrap
  • Peugeot 403 carbon fiber wrap
  • Peugeot 403 camo and patterned wrap

How much vinyl to wrap a Peugeot 403

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1955–1966convertible, sedan, wagon (4 or 5 doors)176.0 in (4,470 mm) to 181.5 in (4,610 mm)about 46 ft (14 m) for the convertible to 62 ft (19 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m)

Peugeot 403 wrap cost factors

Peugeot 403 wrap cost depends on the body style, the film finish and the labor for this car. The convertible needs about 46 ft (14 m) of film and the wagon about 62 ft (19 m). Chrome or patterned film adds up to about 70 ft (21.5 m). Larger panels on the wagon take more time to install than the convertible's shorter panels.

  • Film for a full wrap: about 46 ft (14 m) for the convertible to 62 ft (19 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).
  • Body: convertible, sedan, wagon (4 or 5 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Peugeot 403 wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot 403, first generation, factory photo
Factory color shown

1955–1966 Peugeot 403 convertible, sedan, wagon (first generation)

1955–1966convertible, sedan, wagon (4 or 5 doors)176.0 in (4,470 mm) to 181.5 in (4,610 mm)

The first generation Peugeot 403 has an open top on the convertible, and that top is not wrapped. The film ends where the fabric top begins, so the installer works around the roof opening. A folding hard top is wrapped as panels of its own, with seams at the panel edges. The rest of the body receives the same wrap as a closed car.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 46 ft (14 m) for the convertible to 62 ft (19 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Peugeot 403

A partial wrap on a Peugeot 403 covers the roof, hood or mirror caps as separate jobs. A Peugeot 403 chrome delete is done with black film over the window trim and badges. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. Each of these jobs uses less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Peugeot 403: body, cut-outs and film

A Peugeot 403 vinyl wrap has to follow the body styles and sizes of the car. The sedan is the shortest at 176.0 in (4,470 mm) and the wagon is the longest at 181.5 in (4,610 mm). The convertible needs the least film because the fabric top is not wrapped. The wagon with its tall tailgate and rear glass uses the most film.

Peugeot 403 wrap ideas start with the parts that need cut-outs or come off. The tailgate with the rear glass in it means the film ends at the edge of the glass. Door handles, badges and trim are removed for a clean install. On a convertible, the film ends where the fabric top begins.

How much vinyl to wrap a Peugeot 403 depends on the generation, but all 403s are the first generation. The body styles from 1955 to 1966 are the convertible, sedan and wagon in 4 or 5 doors. The convertible takes about 46 ft (14 m) and the wagon about 62 ft (19 m). The 60-inch (1.52 m) film is common because the 403 is a compact car.

Questions about wrapping a Peugeot 403

How much vinyl does it take to wrap a Peugeot 403?

It takes about 46 ft (14 m) to 62 ft (19 m) of vinyl to wrap a Peugeot 403, depending on the body style. The convertible needs about 46 ft (14 m) and the wagon about 62 ft (19 m). The 60-inch (1.52 m) cast film is used for a full color change wrap.

Is the top of a Peugeot 403 wrapped?

No, the top of a Peugeot 403 convertible is not wrapped. The fabric top is left uncovered and the film ends where the top begins. A folding hard top is wrapped as panels of its own.

Which Peugeot 403 body takes more film?

The wagon of the Peugeot 403 takes more film than the convertible. The wagon needs about 62 ft (19 m) and the convertible about 46 ft (14 m). The wagon's tall tailgate and 5-door layout use more material.

Can I wrap only the hood or the roof of a Peugeot 403?

Yes, you can wrap only the hood or the roof of a Peugeot 403 as a partial wrap. The roof, hood and mirror caps are wrapped as separate jobs. A chrome delete of the window trim and badges is also a partial job.