Wraps by car

Peugeot 404 wrap

A Peugeot 404 wrap covers this classic car with a color change vinyl wrap. The Peugeot 404 was produced from 1960 to 1975 in one generation. A full wrap of the newest body takes about 46 ft (14 m) for the convertible to 59 ft (18 m) for the wagon.

1generations14 mof film for a full wrap

Peugeot 404, first generation, factory photo
Peugeot 404, first generation. Factory color shown.

Peugeot 404 wrap colors and ideas

  • Peugeot 404 black wrap
  • Peugeot 404 white wrap
  • Peugeot 404 gray wrap
  • Peugeot 404 silver wrap
  • Peugeot 404 red wrap
  • Peugeot 404 blue wrap
  • Peugeot 404 green wrap
  • Peugeot 404 yellow wrap
  • Peugeot 404 orange wrap
  • Peugeot 404 purple wrap
  • Peugeot 404 pink wrap
  • Peugeot 404 teal wrap
  • Peugeot 404 brown wrap
  • Peugeot 404 gold wrap
  • Peugeot 404 chrome wrap
  • Peugeot 404 color shift wrap
  • Peugeot 404 carbon fiber wrap
  • Peugeot 404 camo and patterned wrap

How much vinyl to wrap a Peugeot 404

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1960–1975convertible, coupe, sedan, wagon (2 or 4 or 5 doors)174.9 in (4,442 mm) to 180.3 in (4,580 mm)about 46 ft (14 m) for the convertible to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m)

Peugeot 404 wrap cost factors

Peugeot 404 wrap cost depends on the body style and the amount of film. A convertible uses about 46 ft (14 m) of 60-inch (1.52 m) film, while a wagon uses about 59 ft (18 m). Chrome or patterned film can raise the total to about 69 ft (21 m).

  • Film for a full wrap: about 46 ft (14 m) for the convertible to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).
  • Body: convertible, coupe, sedan, wagon (2 or 4 or 5 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Peugeot 404 wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot 404, first generation, factory photo
Factory color shown

1960–1975 Peugeot 404 convertible, coupe, sedan, wagon (first generation)

1960–1975convertible, coupe, sedan, wagon (2 or 4 or 5 doors)174.9 in (4,442 mm) to 180.3 in (4,580 mm)

On the first generation Peugeot 404, an open top is not fully covered by vinyl wrap. The fabric roof stays unwrapped and the film ends where the top begins. A folding hard top is wrapped as separate panels of its own.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 46 ft (14 m) for the convertible to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Peugeot 404

A partial wrap on a Peugeot 404 covers the roof, hood, or mirror caps. A chrome delete replaces bright trim on window frames and badges with black film. Paint protection film (PPF) can be applied as clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Peugeot 404: body, cut-outs and film

A Peugeot 404 vinyl wrap follows the four body styles and their different sizes. The convertible, coupe, sedan, and wagon have 2, 4, or 5 doors and measure from 174.9 in (4,442 mm) to 180.3 in (4,580 mm) long. This size range means film use changes by only about 20 percent between the smallest and largest body.

Peugeot 404 wrap ideas include handling the soft top and the rear glass. On the convertible, the fabric top is not wrapped and the film ends where it begins. On the wagon, the tailgate with its rear glass needs the film to stop at the edge of the glass.

Knowing how much vinyl to wrap a Peugeot 404 helps when you compare the four body styles. A 60-inch (1.52 m) cast film is used for all bodies, with about 46 ft (14 m) needed for the convertible and 59 ft (18 m) for the wagon. The coupe and sedan fall between these two figures.

Questions about wrapping a Peugeot 404

How much vinyl does it take to wrap a Peugeot 404?

A Peugeot 404 needs about 46 ft (14 m) to 59 ft (18 m) of vinyl for a full wrap. The exact amount depends on the body style, with the convertible using the least and the wagon the most.

Is the top of a Peugeot 404 wrapped?

The top of a Peugeot 404 is usually not wrapped if it is a fabric convertible top. The film ends where the fabric begins, so the top stays unwrapped. A folding hard top is wrapped as its own panels.

Which Peugeot 404 body takes more film?

The Peugeot 404 wagon takes more film than the other body styles. A wagon uses about 59 ft (18 m) compared to 46 ft (14 m) for the convertible. The coupe and sedan use amounts between those two.

Can I wrap only the hood or the roof of a Peugeot 404?

You can wrap only the hood or the roof of a Peugeot 404 as a partial wrap. Partial wraps also include mirror caps, and a chrome delete covers window trim and badges. Paint protection film (PPF) can be applied just to the front end.