Wraps by car

Peugeot 405 wrap

This page covers the Peugeot 405 wrap, a compact sedan and wagon built from 1987 to 1997. A full vinyl wrap on the newest body takes about 49 ft (15 m) to 52 ft (16 m) of 60-inch (1.52 m) cast film. The 405 has one generation in this catalog, but its two body styles change the panel plan and film amount. Use the figures here to plan color change, chrome delete, or paint protection film.

1generations16 mof film for a full wrap

Peugeot 405, first generation, factory photo
Peugeot 405, first generation. Factory color shown.

Peugeot 405 wrap colors and ideas

  • Peugeot 405 black wrap
  • Peugeot 405 white wrap
  • Peugeot 405 gray wrap
  • Peugeot 405 silver wrap
  • Peugeot 405 red wrap
  • Peugeot 405 blue wrap
  • Peugeot 405 green wrap
  • Peugeot 405 yellow wrap
  • Peugeot 405 orange wrap
  • Peugeot 405 purple wrap
  • Peugeot 405 pink wrap
  • Peugeot 405 teal wrap
  • Peugeot 405 brown wrap
  • Peugeot 405 gold wrap
  • Peugeot 405 chrome wrap
  • Peugeot 405 color shift wrap
  • Peugeot 405 carbon fiber wrap
  • Peugeot 405 camo and patterned wrap

How much vinyl to wrap a Peugeot 405

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1987–1997sedan, wagon (4 or 5 doors)173.2 in (4,399 mm) to 173.6 in (4,409 mm)about 49 ft (15 m) for the sedan to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m)

Peugeot 405 wrap cost factors

Peugeot 405 wrap cost depends on the body style, film type, and surface preparation. The wagon needs more film than the sedan: 52 ft (16 m) versus 49 ft (15 m), and its tailgate adds labor. Chrome or patterned film can require up to about 67 ft (20.5 m), which raises material use. Detailing, paint correction, and removing trim pieces also affect the final quote for this compact car.

  • Film for a full wrap: about 49 ft (15 m) for the sedan to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).
  • Body: sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Peugeot 405 wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot 405, first generation, factory photo
Factory color shown

1987–1997 Peugeot 405 sedan, wagon (first generation)

1987–1997sedan, wagon (4 or 5 doors)173.2 in (4,399 mm) to 173.6 in (4,409 mm)

The first generation Peugeot 405, sold from 1987 to 1997, came as a four-door sedan and a four- or five-door wagon. The style decides the panel plan and the film amount, with the wagon needing the larger estimate. Sedan doors are the same across both styles, so only the rear and roof change. The 405's compact size keeps film use close to the listed figures for either style.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) for the sedan to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Peugeot 405

A partial wrap on a Peugeot 405 can cover the roof, hood, or mirror caps without wrapping the whole car. Chrome delete replaces bright window trim and badges with black film for a clean look. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film and are a way to change one area of the 405.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Peugeot 405: body, cut-outs and film

A Peugeot 405 vinyl wrap follows the body style: the sedan is 173.2 in (4,399 mm) long and the wagon is 173.6 in (4,409 mm). The wagon adds a tall tailgate and more roof area, so it needs about 52 ft (16 m) of film. The sedan's separate trunk lid is easier to wrap than the wagon's one-piece tailgate. Both styles have straight sides and modest curves, which keep film use close to the estimates.

Peugeot 405 wrap ideas start with the tailgate: the wagon's rear glass is set into the tailgate, so the film ends at the edge of the glass. Door handles, mirrors, and trim badges come off or get cut around for a clean finish. The roof rails on some wagons need relief cuts if you wrap the roof. Plan extra film for the front bumper's deep lower lip and the rear bumper corners.

To know how much vinyl to wrap a Peugeot 405, start with 49 ft (15 m) for the sedan and 52 ft (16 m) for the wagon using 60-inch (1.52 m) cast film. Chrome or patterned film needs up to about 67 ft (20.5 m) because pattern matching forces a different panel layout. The 4B and 4E body codes share the same wheelbase, so film width is the main variable. The wagon's extra roof and tailgate area explain the three-foot difference.

Questions about wrapping a Peugeot 405

How much vinyl does it take to wrap a Peugeot 405?

A Peugeot 405 takes about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full wrap on the sedan, and 52 ft (16 m) on the wagon. The figures cover the newest body in this catalog, which is the 1987–1997 generation. If you use chrome or patterned film, plan for up to about 67 ft (20.5 m).

Which Peugeot 405 body takes more film?

The Peugeot 405 wagon takes more film than the sedan: 52 ft (16 m) versus 49 ft (15 m) of 60-inch (1.52 m) cast film. The wagon's taller roof and one-piece tailgate add about 3 ft (1 m) of material. The sedan's separate trunk lid uses less film on the rear.

Can I wrap only the hood or the roof of a Peugeot 405?

Yes, you can wrap only the hood or the roof of a Peugeot 405. A partial wrap often covers the roof, hood, or mirror caps. Chrome delete on the window trim and badges is another small job. These options use less film than a full color change wrap.

Is a Peugeot 405 hard to wrap?

A Peugeot 405 adds some work on the wagon tailgate, because the rear glass is set into the panel and the film must end at the glass edge. The car's compact length, 173.2 in (4,399 mm) to 173.6 in (4,409 mm), keeps panel sizes manageable. Sedans are easier on the rear, while wagons need more time on the one-piece tailgate.