Wraps by car

Peugeot 504 wrap

The Peugeot 504 wrap page covers this mid-size classic from 1968 to 1996, offered in five body styles including a convertible, coupe, pickup, sedan, and wagon. A vinyl wrap of the newest body takes about 46 ft (14 m) for the convertible to 64 ft (19.5 m) for the wagon, using 60-inch (1.52 m) cast film. Owners planning chrome or patterned film should budget up to about 72 ft (22 m).

1generations17 mof film for a full wrap

Peugeot 504, first generation, factory photo
Peugeot 504, first generation. Factory color shown.

Peugeot 504 wrap colors and ideas

  • Peugeot 504 black wrap
  • Peugeot 504 white wrap
  • Peugeot 504 gray wrap
  • Peugeot 504 silver wrap
  • Peugeot 504 red wrap
  • Peugeot 504 blue wrap
  • Peugeot 504 green wrap
  • Peugeot 504 yellow wrap
  • Peugeot 504 orange wrap
  • Peugeot 504 purple wrap
  • Peugeot 504 pink wrap
  • Peugeot 504 teal wrap
  • Peugeot 504 brown wrap
  • Peugeot 504 gold wrap
  • Peugeot 504 chrome wrap
  • Peugeot 504 color shift wrap
  • Peugeot 504 carbon fiber wrap
  • Peugeot 504 camo and patterned wrap

How much vinyl to wrap a Peugeot 504

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1968–1996convertible, coupe, pickup, sedan, wagon (2 or 4 or 5 doors)171.7 in (4,361 mm) to 189.0 in (4,800 mm)about 46 ft (14 m) for the convertible to 64 ft (19.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m)

Peugeot 504 wrap cost factors

Peugeot 504 wrap cost depends on the body style, the amount of film required, and the complexity of the surfaces. The convertible needs about 46 ft (14 m) of vinyl, while the wagon can require up to 64 ft (19.5 m). Additional chrome or patterned film can push the total to about 72 ft (22 m). Labor is also higher for the pickup because the cab and bed are wrapped as two separate jobs.

  • Film for a full wrap: about 46 ft (14 m) for the convertible to 64 ft (19.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m).
  • Body: convertible, coupe, pickup, sedan, wagon (2 or 4 or 5 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Peugeot 504 wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot 504, first generation, factory photo
Factory color shown

1968–1996 Peugeot 504 convertible, coupe, pickup, sedan, wagon (first generation)

1968–1996convertible, coupe, pickup, sedan, wagon (2 or 4 or 5 doors)171.7 in (4,361 mm) to 189.0 in (4,800 mm)

On the first generation Peugeot 504, the open top of the convertible is not wrapped with vinyl. The film ends where the fabric top begins, following the edge of the roof opening. If the convertible has a folding hard top, that top is wrapped as its own separate panels. Installers mask off the top mechanism to avoid adhesive residue on moving parts.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Film: about 46 ft (14 m) for the convertible to 64 ft (19.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Peugeot 504

For a partial wrap on a Peugeot 504, common jobs are the roof, hood, and mirror caps. A Peugeot 504 chrome delete covers bright window trim and badges with black film. Paint protection film (PPF) is a clear urethane film applied to the front end to guard against stone chips. These smaller jobs are a way to change the look without a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Peugeot 504: body, cut-outs and film

A Peugeot 504 vinyl wrap must account for its five body styles and lengths from 171.7 in (4,361 mm) to 189.0 in (4,800 mm). The convertible and coupe have fewer large flat panels, while the wagon includes a tall roof and tailgate area. The pickup is treated as two separate bodies: the cab and the bed. Film amounts vary accordingly, so measuring each panel before ordering is essential.

Peugeot 504 wrap ideas start with the parts that need cut-outs or come off. On the convertible, the fabric top is not wrapped, and film ends where the top begins; a folding hard top is wrapped as its own panels. The tailgate with rear glass means the film ends at the edge of the glass. For the pickup, the cab and bed are wrapped separately, and the inside of the bed is left unwrapped.

How much vinyl to wrap a Peugeot 504 depends on the generation, but the 504 had only one generation from 1968 to 1996. The body styles within this generation differ in size, with the wagon being the longest and the convertible the shortest. An installer counting film for a full color change wrap measures each panel of the specific body style. The published estimates range from about 46 ft (14 m) for the convertible to 64 ft (19.5 m) for the wagon.

Questions about wrapping a Peugeot 504

How much vinyl does it take to wrap a Peugeot 504?

It takes about 46 ft (14 m) for the convertible to 64 ft (19.5 m) for the wagon, using 60-inch (1.52 m) cast film. The exact amount for a Peugeot 504 depends on the body style and whether you add chrome or patterned film, which can increase the total to about 72 ft (22 m). Always have an installer measure the car before ordering film.

Is the top of a Peugeot 504 wrapped?

No, the fabric top of a Peugeot 504 convertible is not wrapped. The vinyl film ends where the fabric top begins, at the edge of the roof opening. If your 504 has a folding hard top, that top is wrapped as panels of its own.

Is the bed of a Peugeot 504 wrapped?

No, the inside of a Peugeot 504 pickup bed is not wrapped. The cab and bed are wrapped as two separate bodies, but the film stops at the top edges of the bed sides. The interior surfaces of the bed remain bare metal or factory coating.

Which Peugeot 504 body takes more film?

The Peugeot 504 wagon takes more film than the other body styles, with an estimate of about 64 ft (19.5 m) using 60-inch (1.52 m) cast film. The convertible needs the least, at about 46 ft (14 m). The coupe, sedan, and pickup fall in between, with the pickup requiring separate planning for cab and bed.