Wraps by car

Peugeot 505 wrap

The Peugeot 505 wrap page covers the mid-size Peugeot 505 from its single generation, produced from 1979 to 1992. A full vinyl wrap of the newest sedan body needs about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. The wagon body is larger and takes about 66 ft (20 m) of the same film.

1generations15.5 mof film for a full wrap

Peugeot 505, first generation, factory photo
Peugeot 505, first generation. Factory color shown.

Peugeot 505 wrap colors and ideas

  • Peugeot 505 black wrap
  • Peugeot 505 white wrap
  • Peugeot 505 gray wrap
  • Peugeot 505 silver wrap
  • Peugeot 505 red wrap
  • Peugeot 505 blue wrap
  • Peugeot 505 green wrap
  • Peugeot 505 yellow wrap
  • Peugeot 505 orange wrap
  • Peugeot 505 purple wrap
  • Peugeot 505 pink wrap
  • Peugeot 505 teal wrap
  • Peugeot 505 brown wrap
  • Peugeot 505 gold wrap
  • Peugeot 505 chrome wrap
  • Peugeot 505 color shift wrap
  • Peugeot 505 carbon fiber wrap
  • Peugeot 505 camo and patterned wrap

How much vinyl to wrap a Peugeot 505

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1979–1992sedan, wagon (4 or 5 doors)180.3 in (4,580 mm) to 192.9 in (4,900 mm)about 51 ft (15.5 m) for the sedan to 66 ft (20 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m)

Peugeot 505 wrap cost factors

Peugeot 505 wrap cost depends on the body style, the film type, and the amount of disassembly. The wagon is longer than the sedan and uses about 15 ft (4.5 m) more film, which raises the material share. Chrome or patterned film adds waste because the pattern must align, bringing the total to about 74 ft (22.5 m) on the wagon. A plain color change on the sedan is the simplest job.

  • Film for a full wrap: about 51 ft (15.5 m) for the sedan to 66 ft (20 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).
  • Body: sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Peugeot 505 wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot 505, first generation, factory photo
Factory color shown

1979–1992 Peugeot 505 sedan, wagon (first generation)

1979–1992sedan, wagon (4 or 5 doors)180.3 in (4,580 mm) to 192.9 in (4,900 mm)

The first generation Peugeot 505 from 1979 to 1992 offers two body styles: a sedan and a wagon. The style decides the panel plan and the film amount, with the wagon longer at 192.9 in (4,900 mm) compared to the sedan at 180.3 in (4,580 mm). The wagon needs about 66 ft (20 m) of film, while the sedan needs about 51 ft (15.5 m). Both use 60-inch (1.52 m) cast film for a full wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) for the sedan to 66 ft (20 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Peugeot 505

A partial wrap on a Peugeot 505 covers the roof, hood, or mirror caps in the film of your choice. A chrome delete covers the window trim and badges with black film for a darker look. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These jobs use much less film than a full wrap and focus on high-impact or visible areas.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Peugeot 505: body, cut-outs and film

The Peugeot 505 vinyl wrap plan depends on the body style, because the sedan and wagon have different lengths and panel counts. The sedan measures from 180.3 in (4,580 mm) to 192.9 in (4,900 mm) and has four doors, while the wagon adds a longer rear overhang and a fifth door. A full wrap of the sedan uses about 51 ft (15.5 m) of film, and the wagon uses about 66 ft (20 m). These sizes are for 60-inch (1.52 m) cast film laid without a pattern.

Peugeot 505 wrap ideas must account for the tailgate, where the rear glass is set into the sheet metal. The film ends at the edge of the glass, so the installer trims around it and leaves the glass clear. On the sedan, the rear window is separate and allows a clean cut along the trunk lid. Door handles, badges, and trim pieces are also removed or cut out for a neat edge.

To know how much vinyl to wrap a Peugeot 505, compare the body styles within this single generation. The sedan film amount is about 51 ft (15.5 m), and the wagon takes about 66 ft (20 m) with the same 60-inch (1.52 m) film. A patterned or chrome film increases the total to about 74 ft (22.5 m) because the pattern must repeat. These estimates assume careful cutting and no major rework.

Questions about wrapping a Peugeot 505

How much vinyl does it take to wrap a Peugeot 505?

The Peugeot 505 takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for the sedan and about 66 ft (20 m) for the wagon. A chrome or patterned film can bring the total to about 74 ft (22.5 m).

Which Peugeot 505 body takes more film?

The Peugeot 505 wagon takes more film than the sedan, using about 66 ft (20 m) versus about 51 ft (15.5 m). The wagon is longer and has a tailgate that adds panels.

Can I wrap only the hood or the roof of a Peugeot 505?

Yes, you can wrap only the hood or the roof of a Peugeot 505 as a partial wrap. This job uses far less film than a full body wrap and still changes the look.

Is a Peugeot 505 hard to wrap?

The Peugeot 505 is not hard to wrap, but the tailgate with the rear glass needs a careful cut so the film ends at the edge of the glass. The long body also means more film and more patience.