Wraps by car

Peugeot 604 wrap

This Peugeot 604 wrap page covers the full-size sedan produced from 1975 to 1987. It includes one generation and the details for a vinyl wrap on this classic car. A full wrap of the body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases the estimate to about 67 ft (20.5 m).

1generations16 mof film for a full wrap

Peugeot 604, first generation, factory photo
Peugeot 604, first generation. Factory color shown.

Peugeot 604 wrap colors and ideas

  • Peugeot 604 black wrap
  • Peugeot 604 white wrap
  • Peugeot 604 gray wrap
  • Peugeot 604 silver wrap
  • Peugeot 604 red wrap
  • Peugeot 604 blue wrap
  • Peugeot 604 green wrap
  • Peugeot 604 yellow wrap
  • Peugeot 604 orange wrap
  • Peugeot 604 purple wrap
  • Peugeot 604 pink wrap
  • Peugeot 604 teal wrap
  • Peugeot 604 brown wrap
  • Peugeot 604 gold wrap
  • Peugeot 604 chrome wrap
  • Peugeot 604 color shift wrap
  • Peugeot 604 carbon fiber wrap
  • Peugeot 604 camo and patterned wrap

How much vinyl to wrap a Peugeot 604

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1975–1987sedan (4 doors)185.8 in (4,719 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Peugeot 604 wrap cost factors

The Peugeot 604 wrap cost depends on the size of the car and the film chosen. The body is 185.8 in (4,719 mm) long and uses about 52 ft (16 m) of cast film. Chrome or patterned film needs about 67 ft (20.5 m) of material. The cost also depends on the number of parts that are removed and the condition of the paint.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: sedan (4 doors).

Peugeot 604 wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot 604, first generation, factory photo
Factory color shown

1975–1987 Peugeot 604 sedan (first generation)

1975–1987sedan (4 doors)185.8 in (4,719 mm)

The first generation Peugeot 604 was built from 1975 to 1987 as a full-size sedan. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. The installer checks a small area of the paint to see how the film adheres. The film estimate for this generation is about 52 ft (16 m) of 60-inch cast film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Peugeot 604

A partial wrap on a Peugeot 604 can cover the roof, the hood, or the mirror caps. A Peugeot 604 chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film installed on the front end. These smaller jobs use less film and are a good way to change the look of the car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Peugeot 604: body, cut-outs and film

The Peugeot 604 vinyl wrap fits a four-door sedan that is 185.8 in (4,719 mm) long. The straight body lines and recessed areas around the doors and fenders require careful film positioning. A full wrap of this car uses about 52 ft (16 m) of 60-inch cast film. Extra material is needed for the deep bumper sections and the area under the side windows.

For Peugeot 604 wrap ideas, the front grille and headlight surrounds are the main parts that need cut-outs. The door handles, side mirrors, and the chrome trim along the windows should be removed for a clean installation. The rear bumper and the license plate area also require precise trimming. These steps help the film lay flat around the body contours.

To know how much vinyl to wrap a Peugeot 604, the single generation from 1975 to 1987 keeps the film estimate the same. Small trim changes over the years do not alter the amount of wrap film needed. A full wrap still requires about 52 ft (16 m) of 60-inch cast film. If you choose chrome or patterned film, plan for about 67 ft (20.5 m).

Questions about wrapping a Peugeot 604

How much vinyl does it take to wrap a Peugeot 604?

It takes about 52 ft (16 m) of 60-inch (1.52 m) cast film to wrap a Peugeot 604. If you select chrome or patterned film, the estimate is about 67 ft (20.5 m). These figures are for a full wrap of the four-door sedan body.

Can I wrap only the hood or the roof of a Peugeot 604?

Yes, you can wrap only the hood or the roof of a Peugeot 604. A partial wrap can also cover the mirror caps. Another option is a chrome delete on the window trim and badges. Paint protection film (PPF) can be installed on the front end as a separate job.

Is a Peugeot 604 hard to wrap?

The Peugeot 604 is not the easiest car to wrap because of its size and body details. It is 185.8 in (4,719 mm) long, so large panels need careful handling. The chrome trim and the front grille area add cut-out work. The paint age can also make the wrap more challenging on some examples.

How many generations of the Peugeot 604 does this page cover?

This page covers one generation of the Peugeot 604. It is the first and only generation, produced from 1975 to 1987. The information applies to all years of this full-size sedan.