Wraps by car

Peugeot 605 wrap

The Peugeot 605 wrap page covers the full-size sedan made from 1989 to 1999, one generation. A complete vinyl wrap of this body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires roughly 66 ft (20 m) for the same full coverage.

1generations16 mof film for a full wrap

Peugeot 605, first generation, factory photo
Peugeot 605, first generation. Factory color shown.

Peugeot 605 wrap colors and ideas

  • Peugeot 605 black wrap
  • Peugeot 605 white wrap
  • Peugeot 605 gray wrap
  • Peugeot 605 silver wrap
  • Peugeot 605 red wrap
  • Peugeot 605 blue wrap
  • Peugeot 605 green wrap
  • Peugeot 605 yellow wrap
  • Peugeot 605 orange wrap
  • Peugeot 605 purple wrap
  • Peugeot 605 pink wrap
  • Peugeot 605 teal wrap
  • Peugeot 605 brown wrap
  • Peugeot 605 gold wrap
  • Peugeot 605 chrome wrap
  • Peugeot 605 color shift wrap
  • Peugeot 605 carbon fiber wrap
  • Peugeot 605 camo and patterned wrap

How much vinyl to wrap a Peugeot 605

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1989–1999sedan (4 doors)187.6 in (4,765 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Peugeot 605 wrap cost factors

Peugeot 605 wrap cost depends on film type, the condition of the paint, and the area covered. A full wrap on this 187.6 in (4,765 mm) sedan takes about 52 ft (16 m) of cast film, while chrome or patterned film needs about 66 ft (20 m). Paint correction adds another step when the original finish is rough.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: sedan (4 doors).

Peugeot 605 wraps by generation

Swipe sideways. Tap a card for the full description.

Peugeot 605, first generation, factory photo
Factory color shown

1989–1999 Peugeot 605 sedan (first generation)

1989–1999sedan (4 doors)187.6 in (4,765 mm)

The first generation Peugeot 605 was produced from 1989 to 1999 as a four-door sedan. Paint age matters on a car of these years, since panels may be original or repainted. A test spot on the paint before a full wrap shows whether the film will bond well.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Peugeot 605

A partial wrap on a Peugeot 605 covers the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) on the front end is a clear wrap option that shields the nose from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Peugeot 605: body, cut-outs and film

A Peugeot 605 vinyl wrap suits one body style, a four-door sedan. The car is 187.6 in (4,765 mm) long, so a full wrap uses long, continuous film panels. Working around four doors and a full-size trunk adds seaming and finishing time compared with a smaller car.

Peugeot 605 wrap ideas start with a full color change and extend to partial jobs. Door handles, mirrors, and badges come off for a clean install. The window trim and badges are typical cut-out areas when the car receives a chrome delete.

How much vinyl to wrap a Peugeot 605 depends on which film you choose. A standard color change needs about 52 ft (16 m) of 60-inch (1.52 m) cast film. Chrome or patterned film calls for about 66 ft (20 m) because the pattern must be matched at the seams.

Questions about wrapping a Peugeot 605

How much vinyl does it take to wrap a Peugeot 605?

A full wrap of a Peugeot 605 takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 66 ft (20 m), since the pattern must be matched at the seams.

Can I wrap only the hood or the roof of a Peugeot 605?

Yes, the hood or the roof of a Peugeot 605 can be wrapped on its own. The partial wrap options also include mirror caps, and a chrome delete covers the window trim and badges.

Is a Peugeot 605 hard to wrap?

A Peugeot 605 is not the hardest car to wrap, but its size adds work. At 187.6 in (4,765 mm) long, the sedan needs long film panels and careful seaming. The four doors and full-size trunk also mean more edges to tuck and trim.

How many generations of the Peugeot 605 does this page cover?

This page covers one generation of the Peugeot 605, made from 1989 to 1999. The only body style is a four-door sedan.